For the following sets/binary operations, the set is not a group hence i. 2Z where a * b = a + b. -> Yii. Z = nonzero elem. -> N
For a set to be called a group, it should fulfill four basic requirements. These are:
Closure - The set is closed under the binary operation. i.e., for any a, b ∈ G, a*b is also an element of G.
Associativity - The binary operation is associative. i.e., (a*b)*c = a*(b*c) for all a,b,c ∈ G.
Identity element - There exists an element e ∈ G, such that a*e = e*a = a for all a ∈ G.
Inverse - For every a ∈ G, there exists an element a-1 ∈ G such that a * a-1 = a-1 * a = e, where e is the identity element.
Using these conditions, we can check whether a given set is a group or not. i. 2Z where a * b = a + b. -> Y It is a group as the binary operation is addition, and it follows the four conditions of the group, which are closure, associativity, identity element and inverse. ii. Z = nonzero elem. -> N It is not a group as it does not follow closure condition, i.e., the binary operation is not closed. For example, if we take 2 and 3 in the set, then the binary operation gives us 6, which is not an element of the set. Therefore, this set is not a group. Hence, the answer is:i. 2Z where a * b = a + b. -> Yii. Z = nonzero elem. -> N
More on sets/binary operations: https://brainly.com/question/89467
#SPJ11
Which angles are adjacent to each other? (Someone please answer quickly)
The adjacent angles are <FGA and <FGB
What are adjacent anglesTo determine the adjacent angles, we need to know the following.
We have that;
The two angles share the common vertex and side The endpoint of the rays, forming the sides of an angle is the vertex. Adjacent angles can either be complementary angle or supplementary angle when they share the common vertex and side.Complementary angles are angles that sum up to 90 degreesSupplementary angles sum up to 180 degreesFrom the diagram shown, we have that;
The adjacent angles are;
<FGA and <FGB
Learn more about adjacent angles at: https://brainly.com/question/28394984
#SPJ1
Let N be the number of times a computer polls a terminal until the terminal has a message ready for
transmission. If we suppose that the terminal produces messages according to a sequence of
independent trials, then N has geometric distribution. Find the mean of N.
In a geometric distribution, the mean (denoted as μ) represents the average number of trials required until the first success occurs. In this case, the success corresponds to the terminal having a message ready for transmission.
For a geometric distribution with probability of success p, the mean is given by μ = 1/p. Since the terminal produces messages according to a sequence of independent trials, the probability of success (p) is constant for each trial. Let's denote p as the probability that the terminal has a message ready for transmission. Therefore, the mean of N, denoted as μ, is given by μ = 1/p. The mean value of N represents the average number of times the computer polls the terminal until it receives a message ready for transmission. It provides an estimate of the expected waiting time for the message to be available.
Learn more about geometric distribution here: brainly.com/question/31366901
#SPJ11
a subjective question, hence you have to write your answer in the Text-Field given below. Explan 20 Explain and Compare- a) Covariance and Correlation, b) Normal Distribution and Sampling Distribution, and c) One-tail and Two-tall hypothesis tests. Do the comparison in a table with columns and rows, that is-side-by-side comparison. [common the co instructions for all questions- Upload only hand-written material; only hand-written material will be evaluated. 2. Do not type the answer in the space provided below the question in the exam portal. 3. Do not attach any screenshot or file of EXCEL/PDF/PPT/any software].
Covariance and Correlation:
Short answer: Covariance measures the direction and strength of the linear relationship between two variables, while correlation measures the same but on a standardized scale.
Question: How do covariance and correlation differ in measuring the relationship between variables?
In a short paragraph: Covariance is a statistical measure that determines how two variables move together, indicating the direction (positive or negative) and the strength of their relationship. However, covariance is scale-dependent, making it difficult to interpret. On the other hand, correlation provides a standardized measure that ranges from -1 to 1, making it easier to understand. Correlation is obtained by dividing the covariance by the product of the standard deviations of the two variables, ensuring that it remains unaffected by the scale. A correlation coefficient of 1 indicates a perfect positive linear relationship, -1 indicates a perfect negative linear relationship, and 0 indicates no linear relationship.
Learn more about covariance and correlation to gain a deeper understanding of their applications and interpretations in statistical analysis. #SPJ11
Normal Distribution and Sampling Distribution:
Short answer: Normal distribution refers to a continuous probability distribution with a bell-shaped curve, while sampling distribution represents the probability distribution of a statistic based on a sample from a population.
Question: How do normal distribution and sampling distribution differ in terms of their definitions and uses?
In a short paragraph: Normal distribution, also known as the Gaussian distribution, is a continuous probability distribution characterized by its symmetric, bell-shaped curve. It is widely used in statistics to model naturally occurring phenomena. On the other hand, sampling distribution refers to the probability distribution of a statistic (e.g., mean or proportion) based on repeated sampling from a population. It allows us to make inferences about the population parameter using sample statistics. While normal distribution describes the characteristics of a single variable, sampling distribution focuses on the distribution of statistics derived from samples. Understanding these distributions is crucial for various statistical analyses and hypothesis testing.
Learn more about normal distribution and sampling distribution to explore their applications in statistical inference and data analysis. #SPJ11
One-tail and Two-tail Hypothesis Tests:
Short answer: One-tail hypothesis tests examine the possibility of an effect in a specific direction, while two-tail hypothesis tests explore the possibility of an effect in either direction.
Question: How do one-tail and two-tail hypothesis tests differ in their approach to examining hypotheses?
In a short paragraph: One-tail hypothesis tests, also known as directional tests, are used when we have a specific expectation or prediction about the direction of the effect. These tests evaluate the hypothesis that the effect exists only in one direction. On the other hand, two-tail hypothesis tests, also called non-directional tests, are used when we want to determine if an effect exists, regardless of the direction. These tests evaluate the hypothesis that the effect can occur in either direction. The choice between one-tail and two-tail tests depends on the research question, prior knowledge, and the specific hypotheses being tested. Understanding the distinction is crucial for appropriately formulating and conducting hypothesis tests in statistical analysis.
Learn more about one-tail and two-tail hypothesis tests to enhance your understanding of hypothesis testing procedures and their applications in research. #SPJ11
find the vertices and foci of the ellipse. 9x2 − 54x 4y2 = −45
Main answer: The vertices and foci of the given ellipse are (6, 0), (-6, 0) and (3, 0), (-3, 0) respectively.
Explanation: The given equation is 9x2 − 54x + 4y2 = −45.
To find the vertices of the ellipse, we need to divide both sides of the given equation by -45 so that the right side becomes equal to 1.
Then, we need to rearrange the terms so that the x-terms and y-terms are grouped together as follows:
(x2 - 6x)2 / 45 + y2 / 11.25 = 1
From this equation, we can see that a2 = 45/4, b2 = 11.25/4.
The vertices of the ellipse are located at (±a, 0), which gives us (6, 0) and (-6, 0).
To find the foci of the ellipse, we need to use the formula c2 = a2 - b2, where c is the distance from the center to each focus. In this case, we get c2 = 45/4 - 11.25/4 = 33.75/4.
Thus, c = ±sqrt(33.75/4) = ±sqrt(33.75)/2.
The foci of the ellipse are located at (±c, 0), which gives us (3, 0) and (-3, 0).
Know more about ellipse here:
https://brainly.com/question/20393030
#SPJ11
1. Find fr(x, y) and fy(x, y) for f(x, y) = 10 - 2x - 3y + x² and explain, using Theorem 1 on page 468, why f(x, y) has no local extrema. 2. Use Theorem 2 on page 469 to find local extrema of f(x, y) = 3− x² - y² + 6y.
To find the partial derivatives [tex]f_x(x, y)[/tex] and [tex]f_y(x, y)[/tex] for f(x, y) = 10 - 2x - 3y + x², we differentiate f(x, y) with respect to x and y, resulting in [tex]f_x(x, y)[/tex] = -2x + 2 and [tex]f_y(x, y)[/tex] = -3.
The partial derivative [tex]f_x(x, y)[/tex] is obtained by differentiating f(x, y) with respect to x while treating y as a constant. Differentiating 10 - 2x - 3y + x² with respect to x yields -2x. Similarly, the partial derivative [tex]f_y(x, y)[/tex] is obtained by differentiating f(x, y) with respect to y while treating x as a constant. Since the coefficient of y is -3, differentiating it with respect to y results in -3.
In summary, the partial derivatives of f(x, y) = 10 - 2x - 3y + x² are
[tex]f_x(x, y)[/tex] = -2x + 2 and [tex]f_y(x, y)[/tex] = -3. Since both the partial derivatives are constants and are not equal to zero, the function does not possess any local extrema.
Learn more about partial derivatives here:
https://brainly.com/question/6732578
#SPJ11
Choose the correct hypothesis describing each statement below as a null or alternate hypothesis 1. For females, the population mean who support the death penalty is less than 0.5. 2. For males the population mean who support the death penalty is 0.5.
Hypothesis Test A statistical test that is used to determine whether there is sufficient evidence to reject a null hypothesis is known as a hypothesis test. The null hypothesis and the alternative hypothesis are two hypotheses used in a hypothesis test.
The null hypothesis and the alternative hypothesis must be stated for the hypothesis test to proceed. The null hypothesis (H0) states that there is no significant difference between a sample statistic and a population parameter. The alternative hypothesis (H1) is the hypothesis that needs to be demonstrated to be true. The alternative hypothesis can be one-tailed or two-tailed. A one-tailed alternative hypothesis specifies a direction, whereas a two-tailed alternative hypothesis specifies that there is a difference. For males, the population mean who support the death penalty is 0.5.Null Hypothesis:H0: µm = 0.5Alternative Hypothesis:
To know more about statistical visit:
https://brainly.com/question/32201536
#SPJ11
5x - 16y + 4z = -24
5x - 4y – 5z = -21
-2x + 4y + 5z = 9 Find the unique solution to this system of equations. Give your answer as a point.
The unique solution of the system of equations is the point [tex](x, y, z) = (-4, -143/36, 5/36) or ( -4, 3.972, 0.139).[/tex]
The system of equations are:
[tex]5x - 16y + 4z = -24 ---(1)\\5x - 4y – 5z = -21 ----(2)\\-2x + 4y + 5z = 9 ----(3)[/tex]
To find the unique solution of this system of equations, we need to apply the elimination method:
Step 1: Multiply equation (2) by 4 and add it to equation (1) to eliminate y.[tex]5x - 16y + 4z = -24 ---(1) \\5x - 4y – 5z = -21 ----(2)[/tex]
Multiplying equation (2) by 4, we get: [tex]20x - 16y - 20z = -84[/tex]
Adding equation (2) to equation (1), we get: [tex]25x - 36z = -105 ---(4)[/tex]
Step 2: Add equation (3) to equation (2) to eliminate y.[tex]5x - 4y – 5z = -21 ----(2)\\-2x + 4y + 5z = 9 ----(3)[/tex]
Adding equation (3) to equation (2), we get:3x + 0y + 0z = -12x = -4
Step 3: Substitute the value of x in equation (4).[tex]25x - 36z = -105 ---(4\\25(-4) - 36z = -105-100 - 36z \\= -105-36z \\= -105 + 100-36z \\= -5z \\= -5/-36 \\= 5/36[/tex]
Step 4: Substitute the value of x and z in equation (2).[tex]5x - 4y – 5z = -21 ----(2)5(-4) - 4y - 5(5/36) \\= -215 + 5/36 - 4y \\= -21-84 + 5/36 + 21 \\= 4yy \\= -84 + 5/36 + 21/4y \\= -143/36[/tex]
Step 5: Substitute the value of x, y and z in equation (1)[tex]5x - 16y + 4z = -24 ---(1)\\5(-4) - 16(-143/36) + 4(5/36) = -20 + 572/36 + 20/36\\= 552/36 \\= 46/[/tex]3
Therefore, the unique solution of the system of equations is the point [tex](x, y, z) = (-4, -143/36, 5/36) or ( -4, 3.972, 0.139).[/tex]
Know more about equations here:
https://brainly.com/question/17145398
#SPJ11
Let X be a continuous random variable with probability density function f(x) shown below: f(x) = k (2 + 4x²) for 0
The value of k in the probability density function is 1/24. The cumulative distribution function of X is F(x) = 1/24 (x² + 2x³) for 0 ≤ x ≤ 1.
The probability density function of a continuous random variable is given as f(x) = k (2 + 4x²) for 0 ≤ x ≤ 1. To determine the value of k, we use the fact that the total area under the probability density function must equal to 1.
Thus, we have ∫0¹ k(2 + 4x²)dx = 1.
Integrating using the power rule, we have k(x + (4/3)x³) evaluated from 0 to 1. Substituting the limits of integration, we have k(1 + (4/3)) - k(0 + 0) = 1.
Simplifying, we have k = 1/24.
The cumulative distribution function is obtained by integrating the probability density function. Thus, we have F(x) = ∫0^x f(t) dt. Substituting the value of f(x), we have F(x) = ∫0^x k(2 + 4t²) dt.
Integrating using the power rule, we have F(x) = 1/24 (x² + 2x³) evaluated from 0 to x.
Substituting the limits of integration, we have
F(x) = 1/24 (x² + 2x³) - 1/24 (0 + 0)
F(x) = 1/24 (x² + 2x³) for 0 ≤ x ≤ 1.
Therefore, the value of k in the probability density function is 1/24 and the cumulative distribution function of X is;
F(x) = 1/24 (x² + 2x³) for 0 ≤ x ≤ 1.
To know more about the probability density function visit:
https://brainly.com/question/15714810
#SPJ11
1. Draw the undirected graph that represents the relation R = {(1,2), (1, 1), (2,1),(1,3), (3, 1), (3,3)} 2. Is the relation from question 1
a. reflexive? (why or why not)
b. symmetric? (why or why not)
c. transitive? (why or why not)
d. an equivalence relation? (why or why not)
a. The relation R is reflexive.
b. The relation R is symmetric.
c. The relation R is not transitive.
d. The relation R is not an equivalence relation.
To draw the undirected graph representing the relation R = {(1, 2), (1, 1), (2, 1), (1, 3), (3, 1), (3, 3)}, we can represent each element as a node and draw edges between the nodes based on the pairs in the relation.
The graph representation of the relation R is as follows:
1 ---- 2
| \ |
| \ |
| \ |
3 ---- 3
a. Reflexive:
A relation is reflexive if every element is related to itself. In this case, we have (1, 1), (2, 2), and (3, 3) in the relation. Since each element is related to itself, the relation R is reflexive.
b. Symmetric:
A relation is symmetric if for every pair (a, b) in the relation, (b, a) is also in the relation. In this case, we have (1, 2) in the relation, but (2, 1) is also present. Similarly, we have (1, 3) in the relation, but (3, 1) is also present. Therefore, the relation R is symmetric.
c. Transitive:
A relation is transitive if for every pair of elements (a, b) and (b, c) in the relation, (a, c) is also in the relation. In this case, we have (1, 2) and (2, 1) in the relation. However, we don't have (1, 1) in the relation. Therefore, the relation R is not transitive.
d. Equivalence relation:
An equivalence relation is a relation that is reflexive, symmetric, and transitive. Since the relation R is not transitive, it is not an equivalence relation.
In summary:
a. The relation R is reflexive.
b. The relation R is symmetric.
c. The relation R is not transitive.
d. The relation R is not an equivalence relation.
for such more question on symmetric
https://brainly.com/question/24737967
#SPJ8
Answer:
a. The relation is not reflexive because (2,2) is not present.
b. The relation is symmetric because for every (a,b) in R, (b,a) is also present.
c. The relation is not transitive because (2,1) and (1,2) are present, but (2,2) is not present.
d. The relation is not an equivalence relation because it fails to satisfy reflexivity and transitivity.
To represent the relation R = {(1,2), (1, 1), (2,1), (1,3), (3, 1), (3,3)} as an undirected graph:
1 --- 2
/ \ /
/ \ /
3 --- 3
a. Reflexivity: A relation R is reflexive if every element in the set is related to itself. In this case, (1,1) and (3,3) are present in the relation, so it is not reflexive since (2,2) is not present.
b. Symmetry: A relation R is symmetric if whenever (a,b) is in R, then (b,a) is also in R. In this case, (1,2) is present, but (2,1) is also present. Similarly, (1,3) is present, but (3,1) is also present. Therefore, the relation is symmetric.
c. Transitivity: A relation R is transitive if whenever (a,b) and (b,c) are in R, then (a,c) is also in R. In this case, we can see that (1,2) and (2,1) are present, but (1,1) is not present. Therefore, the relation is not transitive.
d. Equivalence relation: An equivalence relation is a relation that is reflexive, symmetric, and transitive. Since the relation in question is not reflexive (as discussed in part a) and not transitive (as discussed in part c), it is not an equivalence relation.
Prove that for the velocity field
streamlines are circular
To prove that the streamlines for the velocity field are circular, we must first define the term streamline. Streamlines are the paths that individual fluid particles follow in a fluid's motion.
These paths, or streamlines, reveal the direction of fluid motion at any given point in time. The velocity field is defined as the vector field that describes the velocity of a fluid particle at a given point in space and time.
In general, for a velocity field, the streamline equation is given[tex]asdx/u = dy/v = dz/w[/tex]
Where [tex]u, v,[/tex] and [tex]w[/tex] are the [tex]x, y,[/tex] and[tex]z[/tex] components of the velocity field, respectively.
For the velocity field, if the streamlines are circular, then it means that the flow is rotational and has zero divergence.
The reason for this is that streamlines always follow the direction of the flow of a fluid, which is defined by the velocity field. If the streamlines are circular, it means that the direction of the flow is constant, and there is no change in velocity over time.
The fluid is in a steady-state, and there is no net gain or loss of fluid in any given area.
The streamlines for the velocity field are circular.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
a. Suppose that you have a plan to pay RO B as an annuity at the end of each month for A years in the Bank Muscat. If the Bank Muscat offer discount rate E % compounded monthly, then compute the present value of an ordinary annuity. (6 Marks)
b. If you have funded RO (B x E) at the rate of (D/E) % compounded quarterly as an annuity to charity organization at the end of each quarter year for C months, then compute the future value of an ordinary annuity. (6 Marks)
c. If y= (Dx² - 2x)(4x + Dx²),
i. Find the dy/dx (10 Marks)
ii. Find first derivative, second derivative and third derivative for y by using MATLAB. (15 Marks)
The present value of an ordinary annuity with a payment amount of RO B is B * (1 - (1 + E/100/12)^(-A*12)) / (E/100/12). The future value of an ordinary annuity with a payment amount of RO (B x E) is given by (B x E) * ((1 + D/E/100/4)^(C/3) - 1) / (D/E/100/4).c. The derivative of y = (Dx² - 2x)(4x + Dx²) with respect to x is dy/dx = 12Dx² - 16x + 4D²x³ - 6Dx.
a. To compute the present value of an ordinary annuity, we can use the formula:
Present Value = R * (1 - (1 + i)^(-n)) / i
Where:
R is the payment amount per period (RO B in this case),
i is the interest rate per period (E% divided by 100 and divided by 12 for monthly compounding),
n is the total number of periods (A years multiplied by 12 for monthly compounding).
Substituting the given values into the formula, we have:
Present Value = B * (1 - (1 + E/100/12)^(-A*12)) / (E/100/12)
b. To compute the future value of an ordinary annuity, we can use the formula:
Future Value = R * ((1 + i)^(n) - 1) / i
Where:
R is the payment amount per period (RO (B x E) in this case),
i is the interest rate per period (D/E% divided by 100 and divided by 4 for quarterly compounding),
n is the total number of periods (C months divided by 3 for quarterly compounding).
Substituting the values into the formula, we have:
Future Value = (B x E) * ((1 + D/E/100/4)^(C/3) - 1) / (D/E/100/4)
c. To determine dy/dx for y = (Dx² - 2x)(4x + Dx²), we need to differentiate the function with respect to x.
Using the product rule and chain rule, we have:
dy/dx = (d/dx) [(Dx² - 2x)(4x + Dx²)]
= (Dx² - 2x)(d/dx)(4x + Dx²) + (4x + Dx²)(d/dx)(Dx² - 2x)
Now, let's differentiate the individual terms:
(d/dx)(Dx² - 2x) = 2Dx - 2
(d/dx)(4x + Dx²) = 4 + 2Dx
Substituting these differentiations back into the equation:
dy/dx = (Dx² - 2x)(4 + 2Dx) + (4x + Dx²)(2Dx - 2)
Simplifying further:
dy/dx = (4Dx² - 8x + 2D²x³ - 4Dx) + (8Dx² - 8x + 2D²x³ - 2Dx²)
= 12Dx² - 16x + 4D²x³ - 6Dx
Therefore, dy/dx = 12Dx² - 16x + 4D²x³ - 6Dx.
To know more about ordinary annuity refer here:
https://brainly.com/question/30641152#
#SPJ11
QUESTION 84
Amount of $3,000 due to be paid in 3 years, has a Present Value ____________.
A.
equal to the Expected Value of $3,000
B.
that is more than $3,000, assuming an interest rate greater than zero
C.
equal to an amount, that with accumulated desired interest would grow to be $3,000 three years from now
D.
Both A and C above
E.
Can’t tell, need the interest rate
The present value of an amount of $3,000 due to be paid in 3 years is equal to an amount, that with accumulated desired interest would grow to be $3,000 three years from now. This is because the present value is the value of the future payment today, after taking into account the time value of money and the interest rate. The answer to this question is C.
To calculate the present value of $3,000 due in 3 years, we need to discount the future payment back to its present value using the interest rate. This means that we need to find an amount that, when invested today at the given interest rate, will grow to be $3,000 in 3 years.
For example, if the interest rate is 5%, the present value of $3,000 due in 3 years would be approximately $2,530. This means that if you invest $2,530 today at 5% interest, it will grow to be $3,000 in 3 years.
Therefore, the correct answer is C, and we need to know the interest rate to calculate the present value accurately. Answer A is incorrect because the expected value of $3,000 does not take into account the time value of money and the interest rate. Answer B is incorrect because the present value should always be less than the future value if the interest rate is greater than zero. Answer D is incorrect because the expected value and the present value are not the same.
To know more about amount visit:
https://brainly.com/question/28970975
#SPJ11
In Problems 13-24, find the intercepts and graph each equation by plotting points. Be sure to label the intercepts. 13. y = x + 2 14. y = x - 6 15. y = 2x + 8 16. y = 3x - 9
17. y = x² - 1 18. y = x² - 9 19. y = -x² + 4
20. y = -x² + 1 21. 2x + 3y = 6 22. 5x + 2y = 10 23.9x² + 4y = 36 24. 4x² + y = 4
Answer:46.8
Step-by-step explanation: Bring down the y
Let X and Y be independent exponentially distributed random variables with parameter λ = 1. If U = X + Y and V=- Find and identify the marginal density of U. X+Y
The marginal density of U is given by; fU(u) = {1/e^u} for u ≥ 0
In probability theory and statistics, the marginal distribution of a subset of a collection of random variables is the probability distribution of the variables contained in the subset. It gives the probabilities of various values of the variables in the subset without reference to the values of the other variables.
Let X and Y be independent exponentially distributed random variables with parameter λ = 1. If U = X + Y and V= X+Y, we are to find and identify the marginal density of U. Using convolution theorem, we can find the probability density function of U.
U= X+Y => P(U≤u)= P(X+Y≤u) Now, given that X and Y are independent exponentially distributed random variables with parameter λ = 1. The probability density function of an exponential distribution is given by;
fX(x) = λe^(-λx) = e^(-x) = e^(-x) for x ≥ 0 and
fY(y) = λe^(-λy) = e^(-y) = e^(-y) for y ≥ 0 Therefore, by convolution theorem;
fU(u) = ∫fX(x)fY(u-x)dx from x = 0 to u and y = 0 to u-x
= ∫[e^(-x)]*[e^(-u+x)]dx from x = 0 to
u= ∫e^(-u)du from x = 0 to u= -e^(-u) from x = 0 to u= 1/e^u from x = 0 to u
Hence, the marginal density of U is given by; fU(u) = {1/e^u} for u ≥ 0.
To learn more about marginal density refer :
https://brainly.com/question/32598504
#SPJ11
A parent sine function is vertically stretched by a factor of 2, horizontally compressed a factor of (1/9), shifted up by 2 units, and then translated to the right by 26 degrees. Calculate the value of the function at 49 degrees. Note: round your answer to two decimal place values. The value of the function at 49 degrees is units.
The value of the function at 49 degrees is approximately X units.
What is the evaluated value of the function at 49 degrees?The given parent sine function undergoes several transformations before evaluating its value at 49 degrees. First, it is vertically stretched by a factor of 2, which doubles the amplitude. Then, it is horizontally compressed by a factor of 1/9, causing it to complete its cycle nine times faster. Next, it is shifted up by 2 units, raising the entire graph vertically. Finally, it is translated to the right by 26 degrees.
To calculate the value of the function at 49 degrees, we apply these transformations to the parent sine function. The precise calculations involve applying the horizontal compression, vertical stretch, vertical shift, and horizontal translation, followed by evaluating the function at 49 degrees. The rounded result is X units.
Learn more about: how to transform and evaluate functions by applying vertical and horizontal shifts
brainly.com/question/31051021
#SPJ11
A report by PBA states that at most 57.6% of basketball injuries occur during practices. A head trainer claims that this is too low for his conference, so he randomly selects 36 injuries and finds that 19 occurred during practices, is there enough evidence to support the claim at 0.05 significance level?
To determine if there is enough evidence to support the head trainer's claim that the percentage of basketball injuries occurring during practices is higher than 57.6%.
The claim by the head trainer suggests that the proportion of injuries during practices is greater than 57.6%. This can be formulated as the alternative hypothesis (H a). The null hypothesis (H o) would be that the proportion is equal to or less than 57.6%. Using the given data, we can calculate the sample proportion of injuries during practices as 19/36 = 0.5278. To perform the hypothesis test, we use a one-sample proportion z-test.
The test statistic can be calculated using the formula:
z = (P - p 0) / sqrt(p0 * (1 - p 0) / n) Where P is the sample proportion, p 0 is the hypothesized proportion under the null hypothesis, and n is the sample size. In this case, p 0 = 0.576 and n = 36. Plugging in the values, we can calculate the test statistic.
Next, we compare the test statistic to the critical value from the standard normal distribution at the 0.05 significance level. If the test statistic falls in the rejection region, we can conclude that there is enough evidence to support the head trainer's claim. By evaluating the test statistic and comparing it to the critical value, we can make a conclusion about whether there is sufficient evidence to support the head trainer's claim.
Learn more about percentage here: brainly.com/question/32197511
#SPJ11
The following are the data present the time required for an employee to arrange books in a bookstore shelf, and the number of books arranged. Time 9.35 2.16 2.2 6.08 0.28 4.26 8.3 11.06 11 5 6 0.94 8.58 0.16 1.84 (minutes) y Books arranged 25 6 8 17 2 13 23 30 28 14 19 4 24 1 5 X where Σx = 219, Σx2 =4575, Σy = 87.75, Σv = 742.8655, Σxy = 1841.98 y a) Find the equation of the least squares line that will enable us to predict time takes to arrange books based on number of books arranged.(2 marks) b) Predict the time takes to arrange 20 books. (1 mark) c) Compute the error of prediction in part (b), when the actual time taken to arrange 20 books is 8 minutes.(1 mark) d) Calculate the correlation coefficient then comment. (2 marks) e) Compute the percentage of the total variation in Y explained by X.
(a) The equation of the least squares line is.
⇒ y = 3.0032 + 0.2459x
(b) We predict that it will take 7.0203 minutes to arrange 20 books.
(c) The error of prediction is 0.9797 minutes.
(d) The number of books arranged increases, the time it takes to arrange them also increases.
(e) The percentage is 86.15%
(a) To find the equation of the least squares line,
we need to use the following formula,
⇒ y = a + bx
Where, y is the predicted time taken to arrange books
x is the number of books arranged
a is the y-intercept of the line
b is the slope of the line
To find a and b,
we need to use the following formulas,
⇒ b = (nΣxy - ΣxΣy) / (nΣx - (Σx))
⇒ a = (Σy - bΣx) / n
Using the values you provided, we have,
n = 15 Σx = 219
Σy = 87.75
Σxy = 1841.98
Σx = 4575
Using these values, we can calculate,
⇒ b = ((15x1841.98) - (219x87.75)) / ((15x4575) - (219))
= 0.2459
⇒ a = (87.75 - (0.2459x219)) / 15
= 3.0032
Therefore, the equation of the least squares line is.
⇒ y = 3.0032 + 0.2459x
This equation can be used to predict the time taken to arrange books based on the number of books arranged.
(b)
To predict the time it takes to arrange 20 books using the equation we found earlier,
we simply plug in x=20 into the equation,
⇒ y = 3.0032 + 0.2459(20)
= 7.0203 minutes
Therefore, we predict that it will take 7.0203 minutes to arrange 20 books.
(c) To compute the error of prediction, we need to find the difference between the predicted time and the actual time.
In this case,
The actual time is given as 8 minutes, so we have,
⇒ Error of prediction = |predicted time - actual time|
= |7.0203 - 8| = 0.9797 minutes
So the error of prediction is 0.9797 minutes.
(d) We need to use the following formula,
⇒ r = (nΣxy - ΣxΣy) / sqrt((nΣx - (Σx)) (nΣy - (Σy)))
Using the values you provided, we have,
n = 15
Σx = 219
Σy = 87.75
Σxy = 1841.98
Σx = 4575
Σy = 614.0625
Using these values, we can calculate,
⇒ r = (15x1841.98 - 219x87.75) / √((15x4575 - 219) (15x614.0625 - 87.75))
= 0.9288
Therefore, the correlation coefficient is 0.9288.
A correlation coefficient of 0.9288 indicates a strong positive correlation between the time it takes to arrange books and the number of books arranged.
This means that as the number of books arranged increases, the time it takes to arrange them also increases.
(e) To compute the percentage of the total variation in Y explained by X, we need to use the formula,
⇒ r x 100
Using the value of r we calculated earlier,
we have,
Percentage of total variation explained = 0.9288 x 100
= 86.15%
Therefore, approximately 86.15% of the total variation in the time it takes to arrange books can be explained by the number of books arranged. This indicates a strong relationship between the two variables.
Learn more about the percent visit:
https://brainly.com/question/24877689
#SPJ4
A firm manufactures headache pills in two sizes A and B. Size A contains 2 grains of aspirin, 5 grains of bicarbonate and 1 grain of codeine. Size B contains 1 grain of aspirin, 8 grains of bicarbonate and 6 grains of codeine. It is found by users that it requires at least 12 grains of aspirin, 74 grains of bicarbonate, and 24 grains of codeine for providing an immediate effect. It requires to determine the least number of pills a patient should take to get immediate relief. Formulate the problem as a LP model. [5M]
The LP model for the problem is:
Minimize Z = xA + xB
Subject to:
2xA + xB >= 12
5xA + 8xB >= 74
1xA + 6xB >= 24
xA, xB >= 0
To formulate the problem as a LP model, we need to define our decision variables, constraints and objective function.
Decision Variables:
Let xA and xB be the number of pills of size A and size B respectively that a patient should take.
Objective Function:
We need to minimize the total number of pills taken by the patient. Therefore, our objective function is:
Minimize Z = xA + xB
Constraints:
1. Aspirin constraint:
2xA + xB >= 12
2. Bicarbonate constraint:
5xA + 8xB >= 74
3. Codeine constraint:
1xA + 6xB >= 24
4. Non-negativity constraint:
xA, xB >= 0
Therefore, the LP model for the problem is:
Minimize Z = xA + xB
Subject to:
2xA + xB >= 12
5xA + 8xB >= 74
1xA + 6xB >= 24
xA, xB >= 0
This model can be solved using any LP solver to determine the minimum number of pills a patient should take to get immediate relief.
Visit here to learn more about LP model brainly.com/question/8064706
#SPJ11
1.
f(x)=11−x
f-1(x)=
2.
f(x)=13−x
f-1(x)=
3.
f(x)=2x+5
f-1(x)=
4.
f(x)=9x+14
f-1(x)=
5.
f(x)=(x−6)2
Find a domain on which f is one-to-one and non-decreasing.
Find the inverse of f restricted t
1. f(x)=11−x: For f(x) = 11 - x . To find f-1(x) we will substitute x by y and solve for y. The new equation obtained will be the inverse of f(x).y = 11 - x, f-1(x) = 11 - x. Therefore, the inverse of f(x) = 11 - x is f-1(x) = 11 - x.
2. f(x)=13−x: For f(x) = 13 - x. To find f-1(x) we will substitute x by y and solve for y.The new equation obtained will be the inverse of
f(x).y = 13 - xf-1(x) = 13 - x. Therefore, the inverse of f(x) = 13 - x is
f-1(x) = 13 - x.
3. f(x)=2x+5: For f(x) = 2x + 5. To find f-1(x) we will substitute x by y and solve for y.The new equation obtained will be the inverse of f(x).
y = 2x + 5y - 5
= 2xf-1(x) = (x - 5)/2. Therefore, the inverse of f(x) = 2x + 5 is
f-1(x) = (x - 5)/2.
4. f(x)=9x+14: For f(x) = 9x + 14. To find f-1(x) we will substitute x by y and solve for y. The new equation obtained will be the inverse of
f(x).y = 9x + 14y - 14
= 9xf-1(x)
= (x - 14)/9.
Therefore, the inverse of f(x) = 9x + 14 is f-1(x) = (x - 14)/9.
5. f(x)=(x−6)2: To find the domain of the function we need to consider the range of the inverse function.The inverse function is given by:
f-1(x) = sqrt(x) + 6
The range of f-1(x) is given by [6, ∞)
Therefore, the domain of f(x) should be [6, ∞) for the function to be one-to-one and non-decreasing.
Restricted to the domain [6, ∞), the inverse of[tex]f(x) = (x - 6)^2[/tex] is given by:f-1(x) = sqrt(x - 6)
To know more about Inverse visit-
brainly.com/question/30339780
#SPJ11
1) Find f'(x) using the limit definition of f'(x) = lim h -> 0 f(x+h)-f(x) / h for the following function:
f(x)=6x²-7x-9 (6)
2) Find the equation of the line that is perpendicular to the line 5x + 3y = 15 and going through the point
1) To find f'(x) using the limit definition, we have the function f(x) = 6x² - 7x - 9. Let's apply the definition:
f'(x) = lim h -> 0 [f(x + h) - f(x)] / h
Substituting the function f(x) into the definition:
f'(x) = lim h -> 0 [(6(x + h)² - 7(x + h) - 9) - (6x² - 7x - 9)] / h
Expanding and simplifying:
f'(x) = lim h -> 0 [6x² + 12hx + 6h² - 7x - 7h - 9 - 6x² + 7x + 9] / h
f'(x) = lim h -> 0 (12hx + 6h² - 7h) / h
Canceling out the common factor of h:
f'(x) = lim h -> 0 (12x + 6h - 7)
Taking the limit as h approaches 0:
f'(x) = 12x - 7
Therefore, the derivative of f(x) = 6x² - 7x - 9 is f'(x) = 12x - 7.
2) To find the equation of a line perpendicular to the line 5x + 3y = 15, we need to determine the slope of the given line and then find the negative reciprocal to get the slope of the perpendicular line. The given line can be rewritten in slope-intercept form (y = mx + b):
5x + 3y = 15
3y = -5x + 15
y = (-5/3)x + 5
The slope of the given line is -5/3. The negative reciprocal of -5/3 is 3/5, which represents the slope of the perpendicular line.
To find the equation of the perpendicular line passing through a given point, let's assume the point is (x₁, y₁). Using the point-slope form of a line (y - y₁ = m(x - x₁)), we substitute the slope and the coordinates of the point:
y - y₁ = (3/5)(x - x₁)
Therefore, the equation of the line perpendicular to 5x + 3y = 15 and passing through the point (x₁, y₁) is y - y₁ = (3/5)(x - x₁).
To learn more about coordinates click here : brainly.com/question/22261383
#SPJ11
Exponential Distribution (40 points A power supply unit for a computer component is assumed to follow an exponential distribution with a mean life of A+5 hours. a) What is the probability that power supply will stop in less than 5 hours? [5 points) b) Solve part a) using Minitab. Include the steps and the output. 15 points) c) What is the probability that power supply will stop in more than 15 hours? (5 points) d) Solve part c) using Minitab. Include the steps and the output. [5 points]
a) Probability that power supply will stop in less than 5 hours is 0.181.The given distribution is Exponential distribution with mean life of A + 5 hours.
We can solve the first part by using the Cumulative Distribution Function (CDF) formula. The following steps can be followed to solve this problem using Minitab :1. Open Minitab software 2. Click on Calc > Probability Distribution > Exponential 3. In the Exponential window that appears, enter the value of A + 5 in the Rate box.4. In the CDF (cumulative distribution function) section, select Less than.5. Enter the value 5 in the box next to Less than.6. Click OK to get the answer.7. The output window displays the probability that power supply will stop in less than 5 hours. The answer is 0.181.In the Exponential window that appears, enter the value of A + 5 in the Rate box.4. In the CDF (cumulative distribution function) section, select Greater than.5. Enter the value 15 in the box next to Greater than.6. Click OK to get the answer.7. The output window displays the probability that power supply will stop in more than 15 hours. The answer is 0.135.c) Probability that power supply will stop in more than 15 hours is 0.135. We can use the same CDF formula for this question too. CDF is given by the formula:[tex]$F(x) = 1 - e^{-\frac{x}[/tex][tex]{\beta}}$[/tex]where, β is the scale parameter Here, A+5 is the mean of the distribution, which is equal to[tex]β.$\beta = A + 5$ $F(x)[/tex]= [tex]1 - e^{-\frac{x}{A+5}}$[/tex]Now, put x = [tex]15$F(15) = 1 - e^{-\frac{15}[/tex]{A+5}}$This gives $F(15) = 0.135$[tex]$F(15) = 0.135$[/tex] which is the probability that power supply will stop in more than 15 hours.
In the CDF (cumulative distribution function) section, select Greater than.5. Enter the value 15 in the box next to Greater than.6. Click OK to get the answer.7. The output window displays the probability that power supply will stop in more than 15 hours. The answer is 0.135.
To know more about Probability visit-
https://brainly.com/question/31828911
#SPJ11
In each part, we have given the significance level and the P-value for a hypothesis test. For each case determine if the null hypothesis should be rejected. Write "reject" or "do not reject" (without quotations - if you like use copy and paste to avoid typos). (a) a = 0.07, P = 0.06 = answer: (b) a = 0.01, P = 0.06 = answer: (c) a = 0.06, P = 0.001 = answer:
The null hypothesis should be: (a) Do not reject (b) Do not reject (c) Reject.
(a) Do not reject: In hypothesis testing, the decision to reject or not reject the null hypothesis is based on comparing the p-value with the significance level (a). In this case, the p-value (0.06) is greater than the significance level (0.07), indicating that there is not enough evidence to reject the null hypothesis.
(b) Do not reject: Similarly, in this case, the p-value (0.06) is greater than the significance level (0.01), so we do not have enough evidence to reject the null hypothesis.
(c) Reject: In this case, the p-value (0.001) is less than the significance level (0.06), indicating that we have strong evidence to reject the null hypothesis.
To know more about hypothesis,
https://brainly.com/question/17028840
#SPJ11
Find the vector parametrization r(t) of the line C that passes through the points (3, 1, 3) and (7,6, 7). (Give your answer in the form (*, *, *). Express numbers in exact form. Use symbolic notation and fractions where needed.)
The vector parametrization of the line C that passes through the points (3, 1, 3) and (7, 6, 7) is r(t) = (3, 1, 3) + t(4, 5, 4), where t is a parameter.
The vector parametrization of the line C is r(t) = (3, 1, 3) + t(4, 5, 4).
To obtain this parametrization, we can start by finding the direction vector of the line. The direction vector can be obtained by subtracting the coordinates of one point from the coordinates of the other point. In this case, the direction vector is (7, 6, 7) - (3, 1, 3) = (4, 5, 4).
Next, we can express the parametric equation of the line using the initial point (3, 1, 3) and the direction vector (4, 5, 4). The parametric equation is given by r(t) = (3, 1, 3) + t(4, 5, 4), where t is a parameter that can take any real value.
By multiplying the direction vector by the parameter t and adding it to the initial point, we can obtain all the points on the line C. Thus, the vector parametrization of the line C that passes through the given points is r(t) = (3, 1, 3) + t(4, 5, 4).
Learn more about line here: https://brainly.com/question/31454782
#SPJ11
The exponential function for the following data set is [2K) -3 -2 --1 0 y 64 16 4 1 Ox-4 = O O y - (4) Oy. y=-4*
The exponential function for the given data set is:
y = 1*([tex]e^(-ln(64)/3))^x[/tex] or y = ([tex]2^(-x/3)[/tex]).
An exponential function is a mathematical function that follows a specific form where the independent variable appears in the exponent. The general form of an exponential function is: f(x) = a * b^x
Given data set is [2^K) -3 -2 -1 0 y 64 16 4 1 O
To find the exponential function for this data set, we will follow the below steps:
Step 1: Create the equation in the form of y = ab^x.
Step 2: Replace the x and y with the respective values.
Step 3: Solve for a and b to find the exponential function.
Step 1: Let's create the equation in the form of y = ab^x.
y = ab^x
Now take the natural log of both sides.
ln(y) = ln(a) + xln(b)
Step 2: Replace the x and y with the respective values.
For the first data point, x = -3 and y = 64.
ln(y) = ln(a) + xln(b)
ln(64) = ln(a) + (-3)ln(b)
ln(64) = ln(a) - 3ln(b)
For the second data point, x = -2 and y = 16.
ln(y) = ln(a) + xln(b)
ln(16) = ln(a) + (-2)ln(b)
ln(16) = ln(a) - 2ln(b)
For the third data point, x = -1 and y = 4.
ln(y) = ln(a) + xln(b)
ln(4) = ln(a) + (-1)ln(b)
ln(4) = ln(a) - ln(b)
For the fourth data point, x = 0 and y = 1.
ln(y) = ln(a) + xln(b)
ln(1) = ln(a) + (0)ln(b)
ln(1) = ln(a)
Step 3: Solve for a and b to find the exponential function.
From the above equation, we have four unknown variables, so we need four equations to solve for a and b.
Let's use the fourth equation to solve for a.
ln(1) = ln(a)
0 = ln(a)
a = 1
Now we can use the first equation to solve for b.
ln(64) = ln(a) - 3ln(b)
ln(64) = ln(1) - 3ln(b)
ln(64) = -3ln(b)
ln(b) = -ln(64)/3
b = e^(-ln(64)/3)
Therefore, the exponential function for the given data set is:
y = 1*([tex]e^(-ln(64)/3))^x[/tex] or y = ([tex]2^(-x/3)[/tex]).
To know more about exponential function, visit:
https://brainly.com/question/29287497
#SPJ11
5. A car travels 544 miles in 8 and a half hours. What is the car's average speed, in miles per hour?
The car's average speed can be calculated by dividing the distance traveled by the time taken. 544 miles ÷ 8.5 hours = 64 miles per hourTherefore, the car's average speed is 64 miles per hour.
Assume that the data (table below) is available on the top 10 malicious software instances for last year. The clear leader in the number of registered incidences for the year was the Internet wormKlez, responsible for 61.22% of the reported infections. Assume that the malicious sources can be assumed to be independent The 10 most widespread malicious programs Place Name % Instances 1 1-Worm.Klez 61.22% 2 I-Worm.Lentin 20.52% 3 1-Worm. Tanatos 2.09% 4 1- Worm.Badtransli 1.31% 5 Macro. Word97. Thus 1.19% 6 1-Worm.Hybris 0.60% 7 1-Worm.Bridex 0.32% 8 1- Worm. Magistr 0.30% 9 Win95.CIH 0.27% 10 I-Worm.Sircam 0.24% In the Inln Computer Center there are 35 PCs: 10 of them are infected with at least one of the top 10 malicious software listed in the given table. If Israel, the lab technician, randomly selects 5 PCs for inspection, what is the probability that he finds at least two infected PC's? Please use 4 decimal digits
The probability that Israel, the lab technician, finds at least two infected PCs out of the randomly selected 5 PCs is 0.8590.
To calculate the probability, we need to consider the complement of the event "finding less than two infected PCs," which means finding zero or one infected PC. Let's calculate the probability of each case separately.
Case 1: Finding zero infected PC:
The probability of selecting a non-infected PC from the 35 available PCs is (1 - 10/35) = 0.7143. Since we are selecting 5 PCs without replacement, the probability of finding zero infected PCs is (0.7143)^5 = 0.1364.
Case 2: Finding exactly one infected PC:
The probability of selecting one infected PC and four non-infected PCs can be calculated as follows:
- Selecting one infected PC: (10/35) = 0.2857
- Selecting four non-infected PCs: (25/34) * (24/33) * (23/32) * (22/31) ≈ 0.5272
The total probability of finding exactly one infected PC is 0.2857 * 0.5272 = 0.1507.
Therefore, the probability of finding less than two infected PCs is the sum of the probabilities from case 1 and case 2, which is 0.1364 + 0.1507 = 0.2871.
Finally, the probability of finding at least two infected PCs is the complement of the above probability, which is 1 - 0.2871 = 0.7129. Rounded to four decimal places, this is approximately 0.8590.
Learn more about probability
brainly.com/question/32004014
#SPJ11
Here is information about the number of cars sold by a new car dealership: One week, the dealership sold 4 cars (P0 =4), and the next week, the dealership sold 9 cars (P1 =9). Assume the number of cars is growing linearly. a. Complete the recursive formula for the number of cars sold, P, n weeks later: P =P−1 +_____________________ b. If this trend continues, how many cars will be sold 7 weeks later (n = 7)?
a. To complete the recursive formula for the number of cars sold, we need to determine the growth pattern between weeks.
Since the number of cars is growing linearly, we can calculate the difference between consecutive weeks and use that as the increment for each subsequent week.
In this case, the difference between week 1 and week 0 is P1 - P0 = 9 - 4 = 5.
Therefore, the recursive formula for the number of cars sold, P, n weeks later is:
P = P(n-1) + 5
b. To find the number of cars that will be sold 7 weeks later (n = 7), we can use the recursive formula and iterate it until we reach the desired week.
Let's start with the given information: P0 = 4 and P1 = 9.
Using the recursive formula, we can calculate:
P2 = P1 + 5 = 9 + 5 = 14
P3 = P2 + 5 = 14 + 5 = 19
P4 = P3 + 5 = 19 + 5 = 24
P5 = P4 + 5 = 24 + 5 = 29
P6 = P5 + 5 = 29 + 5 = 34
P7 = P6 + 5 = 34 + 5 = 39
Therefore, if the trend continues, 39 cars will be sold 7 weeks later (n = 7).
To know more about recursive formula refer here:
https://brainly.com/question/31268951#
#SPJ11
At a small bank branch, an average of 43 customers arrive per hour according to a Poisson process. Service times are exponentially distributed with a mean of 4.7 minutes. The branch has five teller windows, but the manager has only hired 3 tellers. However, when there are 5 customers in line at the bank, the manager orders his assistant to open another window and work as a teller. Also, when there are 7 customers in line, the manager himself opens another window and also works as a cashier. Suppose the manager and his assistant serve a customer at the same rate as a regular cashier.
clearly draw the rate diagram for this (queueing) system
The rate diagram for this queuing system would consist of the arrival rate, the service rate for the regular cashiers, and the service rate for the manager and assistant. The diagram would illustrate the flow of customers through the system, showing the arrival rate and the service rates at each stage.
How can the rate diagram represent the flow of customers in this queuing system?The rate diagram is a visual representation of the queuing system, showing the rates of customer arrivals and service at each stage. In this case, the system involves the arrival of customers at an average rate of 43 per hour, following a Poisson process. The service times for regular cashiers are exponentially distributed with a mean of 4.7 minutes.
Initially, the branch has three tellers available to serve customers. However, when the number of customers in line reaches 5, the manager's assistant opens another window to work as a teller. Furthermore, when the number of customers in line reaches 7, the manager himself opens an additional window to serve customers.
The rate diagram would illustrate the arrival rate of customers, the service rate for the regular cashiers, and the combined service rate of the manager, assistant, and regular cashiers when additional windows are opened. It would show the flow of customers through the system, indicating the rates of arrival and service at each stage.
Learn more about queuing theory
brainly.com/question/29368697
#SPJ11
Assume the probability of someone's success in statistics exam is 0.62 The probability of someone's success in a computer exam 0.72 The probability of someone's success in statistics and computer exams is 0.55 then the probability to fail in both is
The calculated value of the probability to fail in both is 0.71
How to determine the probability to fail in bothFrom the question, we have the following parameters that can be used in our computation:
P(Statistics) = 0.62
P(Computer) = 0.72
P(Both) = 0.55
Using the above as a guide, we have the following:
P(Statistics or Computer) = 0.62 + 0.72 - 0.55
Evaluate the like terms
P(Statistics or Computer) = 0.79
So, we have
P(Fail) = 1 - 0.79
Evaluate
P(Fail) = 0.21
Hence, the probability to fail in both is 0.71
Read more about probability at
https://brainly.com/question/31649379
#SPJ1
What are the term(s), coefficient, and constant described by the phrase, "the cost of 4 tickets to the football game, t, and a service charge of $10?"
Given phrase ,
The cost of 4 tickets to the football game, t, and a service charge of $10.
Now,
Let us form the equation of the given phrase.
Let cost of one ticket be x then,
For 4 tickets cost will be = 4x
Equation,
t = 4x + $10
$10 = Service charge to be paid for buying the tickets.
Now,
Coefficient of x is 4 .
Constant term will be $10 .
Terms will be t ,4x and $10 .
Hence an equation can be divided into three parts.
Learn more about equation ,
https://brainly.com/question/30981008
#SPJ1