Match the job titles to the tasks.
aeronautical engineer
animator
webpage designer
commercial photographer
creates storyboards based on clients
needs
assesses proposals for airplane designs
to determine if they meet standards
uses special equipment and techniques
to capture images
creates software code, graphics, and
multimedia elements for websites
Answer:
creates storyboards based on clients’ needs- Animator
assesses proposals for airplane designs to determine if they meet standards- Aeronautical engineer
uses special equipment and techniques to capture images- Commercial Photographer
creates software code, graphics, and multimedia elements for websites- Webpage designer
Hope it helps!!!brainliest pls!!I tried my bestCost and benefit, environmental effects, ethical or legal implications, health and safety considerations, and
sustainability are the five main categories of which of the following options?
The five main categories are: Cost and benefit, environmental effects, ethical or legal implications, health and safety considerations, and sustainability are typically considered as the five main categories of impact assessment or analysis.
What is assessment?Impact assessment or analysis is a process of evaluating the potential consequences of a proposed action or decision. The five main categories listed, cost and benefit, environmental effects, ethical or legal implications, health and safety considerations, and sustainability, are commonly used to help organizations understand and weigh the positive and negative consequences of their choices.
Therefore, Cost and benefit analysis evaluates the financial or economic impacts of a proposed action, including the costs of implementation, maintenance, and any potential return on investment.
Learn more about assessment from
https://brainly.com/question/24690729
#SPJ1
The primary of an ideal transformer has 400 turns and its secondary has 200 turns. Neglecting electrical losses, if the power input is 200 W (average) and 240 V (rms), we can expect the output of the secondary to be
Answer:
A.C. Voltage (transformers only work with A.C.) from input (primary) to output (secondary) is purely a function of the turns ratio.
Explanation:
Suzanne Brett wants to borrow $55,000 from the bank. The interest rate is 6.5% and the term is for 5 years.
What is the monthly payment amount?
$2,343.00
$5,857.50
$1214.58
$11,715
Answer: $14575
$55000
6.5%
5 years
Total Payment Amount: $72875
Yearly payment :$72875/5= $14575
Which type of system is being researched to deliver power to several motors to drive multiple systems in vehicles?
hydraulic power system
fluid power system
braking power system
pneumatic power system
Answer:
pneumatic power system
Explanation:
pneumatic power can be used to quietly operate power windows, door locks, power mirrors, and much much more, also negative pressure pneumatics (vacuum) is used to control many engine and fuel systems
When actions that squeeze or push on a rock are stronger in some directions than others, we call this Group of answer choices differential stress. pressure. shear stress. weathering
Differential Stress are known to be actions that squeeze or push on a rock are stronger in some directions than others.
What is Differential Stress?Differential stress is known to be a kind of difference that do exist between the greatest and the least compressive stress that is experienced by a specific object.
The term is used in geological and civil engineering and it is known to be the greatest compressive stress as Differential Stress are known to be actions that squeeze or push on a rock are stronger in some directions than others.
Learn more about Differential Stress from
https://brainly.com/question/4902351
how to make a building like Burj Khalifa?
Answer:
Total cost of construction: $1.5 billion
Explanation:
1. A car engine transfers 3000J in 20 seconds. What is the power generated by the engine?
Answer:
150 W
Explanation:
Power is energy per unit time. The power generated by the engine is ...
(3000 J)/(20 s) = 150 J/s = 150 W
The engine generated 150 watts.
8. When building a structure, square and
plumb mean the same thing.
a. True
b. False
Why are civil engineers often employed by the government?
Civil engineers must first gain experience working for the government in order to be accredited.
Governments are usually responsible for building and maintaining the built environment.
Governments must hire civil engineers because they cannot contract with civil engineers directly.
Private businesses often do not have the resources to pay civil engineers’ salaries.
Answer:
(b) Governments are usually responsible for building and maintaining the built environment.
Explanation:
Public works, which are the responsibility of Government, generally have a considerable civil engineering content. Government employs civil engineers to propose, design, and oversee the construction of such projects.
In some cases, the government employee simply needs to be knowledgeable enough to understand the work done by the contractor's engineers. In other cases, the government employee must make sure the contractor's engineering work is accurate and complete, makes use of appropriate technology, and is in compliance with appropriate regulations and standards. That can require educating the contractor--more than simple oversight.
The next question #5 in the assessment Javier is well versed in computer-aided design and is adept at spatial reasoning. What other skill would be most important to employers if he were applying for a job as a civil engineer?
Answer:
surveying and cartography is the correct
Which of the following distinguishes a reservoir from an accumulator?
Reservoirs often contain contaminants.
Reservoirs do not usually have a set temperature.
Reservoirs usually have zero pressure.
Reservoirs are used for temporary storage.
Answer:
Reservoirs usually have zero pressure
Explanation:
accumulators are controlled by pressure valves while reservoirs are not
accumulators "accumulate" pressure while reservoirs are used to store "overflow" fluids for later use if needed
Answer:
Reservoirs usually have zero pressure
Explanation:
The resistance of a wire is proportional to its length. If 2' of an
electrical wire has a resistance of 12 ohms, what is the
resistance of 9' of the same wire?
Answer:
54
Explanation:
R=r(L/A)
12/x = 2/9
therefore x=54
what is a beta testing ?
For installations where the nonlinear load is huge, most consulting engineers will specify ____-rated transformers.
Answer:
K
Explanation:
For installations where the nonlinear load is huge, most consulting engineers will specify K-rated transformers.
The dangers of welding
Answer:
Health risks include respiratory irritation, metal fume fever, lung cancer, skin cancer, damage to the nervous system, asphyxiation, and other health risks. Safety hazards associated with these processes include burns, eye damage, electrical shock, cuts, injury to toes and fingers.
Explanation:
Answer:
Health risks include respiratory irritation, metal fume fever, lung cancer, skin cancer, damage to the nervous system, asphyxiation, and other health risks. Safety hazards associated with these processes include burns, eye damage, electrical shock, cuts, injury to toes and fingers.
Here are some of the major hazards workers may encounter when welding and how to protect against them.
Fires and explosions. ...
Burn hazards. ...
Radiation. ...
Electricity. ...
Fumes and gases. ...
Other hazards.
Welders face a range of potential hazards that can cause severe injuries and even death.
In order to control the output of the alternator, the voltage regulator controls the ________ of the alternator.
Answer:
Field current through the rotor, inside.
Explanation:
Pls, choose me as brainliest!
A construction company got a project to a build a hotel in a sand desert area where the temperature often exceeds 130° F. Which structural element should they use so that the hotel sustains its structure in such extreme weather conditions?
A.
beam
B.
column
C.
truss
D.
plate
E.
arch
I believe the answer would be the plate
Hope that helps!
what unit contains a hold-in winding and pull-in winding a. field coil b. armature c. starter solenoid d. ignition switch
Answer:
C. starter solenoid
Explanation:
The pull-in coil moves the starter solenoid plunger, a rod that moves the pinion gear toward the ring gear on the flywheel. Positioned next to it, the hold-in coil serves to control the movement of the pull-in coil. The starter solenoid is a powerful device.
Which of the following fluid power systems is portable and human-scale?
a fluid-powered drill
a fluid-powered robot
a fluid-powered construction vehicle
a fluid-powered engine
Answer:
a fluid power engine okk done please
Answer:
A fluid powered drill
Explanation:
Firefighters use these at car accidents because of their durability reliability and incredible torque
Technician A says to check the operation of the throttle valve boost, you do not need to disconnect the vacuum hose on a vacuum modulator and attach a vacuum pump to vary the line pressure. Technician B says to check the operation of the throttle valve boost, you need to connect a pressure gauge to the transmission line pressure test port. Who is correct
Answer:
Technician B you need to connect a pressure gauge to the transmission line pressure test port.
Two common types of glue
Answer:
white craft glue
yellow wood glue
Explanation:
the answer is this!
was it correct?sir!?
Answer:
epoxy
silicone
Explanation:
hope this helps
Describe the greatest power in design according to Aravena?
What are the three problems with global urbanization?
Describe the first case where the power of synthesis was used to solve design problems.
Describe the second case where the power of synthesis was used to solve design problems.
How could you use synthesis in your life to solve problems?
Answer: Describe the greatest power in design according to Aravena? The subject of Aravena’s recent Futuna Lecture Series in New Zealand was ‘the power of design,’ which he described as ultimately being “the power of synthesis” because, increasingly, architects are dealing with complex issues and problems.
What are the three problems with global urbanization? 1. Degraded Environmental Quality ...
2. Overcrowding ...
3. Housing Problems ...
4. Unemployment ...
5. Development of Slums...
How could you use synthesis in your life to solve problems? Hence, synthesis is often not a one-time process of solution design but is used in combination with problem understanding and solution analysis to progress towards a more complete understanding of problems and solutions over time (see Applying the Systems Approach topic for a more complete discussion of the dynamics of this aspect of the approach).
I got all three answers
If trolence adds 1 crayon to 5 boxes, how many goats does he have in his lawn?
Answer: uhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
A construction crew lifts approximately 400 lb. of material several times during a day from a flatbed truck to a 25 ft. rooftop. A block and tackle system with 75 lb. of effort force is designed to lift the materials a). What is the displacement(distance)…by the effort force? b). What is the Ideal Mechanical Advantage of the system?
Answer:
2ib
Explanation:
if you divide 10 divided by 2 it gives you 5 and then subtract it by 2.2 = 2.8
there goes your answer.
Harold Jordan has always dreamed of owning his own split-level home nestled in the mountains. He has saved $50,000 to purchase the building site and is excited to begin looking for an appropriate site. His initial search turned up three properties he thinks would work:
A. A 5-acre lot halfway up a mountain in a very rural area with an asking price of $35,000.
B. A 3-acre lot on flat land in a small town with a great view of the mountains in the distance, with an asking price of $45,000.
C. A 5-acre lot in gently rolling foothills, in a highly developed area, with an asking price of $40,000.
Given this information, answer the following questions.
1. What other factors should Mr. Jordan consider before he makes his final choice?
2. If you were Mr. Jordan, which lot would you choose, and why?
Other factors Jordan needs to consider are the costs for making the building site appropriate including access to electricity, water, etc. Based on this and his interests, I would buy the first site.
What are the factors to consider when you buy a property?There are many factors that should be considered, the main ones include:
Own interests and preferences.Budget.Features of the property.Additional costs.In the case of Jordan, he will need to consider the additional costs required to make the property appropriate for the building.
What is the best option?The best option is the first property because this meets his interests and it is below the budget by $15,000 which can be used to adapt the property.
Learn more about budgets in https://brainly.com/question/15712390
When high head pressure in a hermetic system causes oil and refrigerant breakdown, the presence of moisture or dirt can result in ____ forming.
Answer:
Acids, sludge, carbon
Explanation:
what does a manufacturing engineer do?
Answer: Manufacturing engineers may be responsible for solving production problems, conducting cost-benefit assessments, or designing and manufacturing goods and systems using computer-aided design software. Plant engineers and process engineers are two terms used by professionals in this industry. Manufacturing engineers are in charge of new and existing production lines' technical management, maintenance, and development. Employers are looking for people that are commercially aware and have good technical and analytical skills. They are in charge of keeping production costs low while preserving the product or service's quality, and they have considerable project expertise and insight.
Explanation: See above.
I hope this helps.
Petroleum engineers work almost exclusively with dry materials.
False
True
Which packet-forwarding method does a router use to make switching decisions when it is using a forwarding information base and an adjacency table?.
Technician A says that automatic transaxles used with most longitudinal engines will have a drive chain. Technician B says that all automatic transaxles used with transverse engines will have a helical gear ring and pinion as part of the differential assembly. Who is right
Answer:
Technician B says that all automatic transaxles used with transverse engines will have a helical gear ring and pinion as part of the differential assembly.