A gas at a constant pressure occupies 2.24 L at 52 C. If the sample is cooled until it
takes up 1.66 Lwhat is the new temperature?

Answers

Answer 1

The new temperature of the gas is -32.15 °C or 240.85 K.

The new temperature of the gas can be calculated using the mathematical representation of Charles's law

Charles's law

Charles's law states that at constant pressure, the volume of a fixed mass of gas is directly proportional to its absolute temperature.

Formula:

V/T = V'/T'................ Equation 1

Where:

V = Initial volume of the gasT = Initial temperature of the gasV' = Final Volume of the gasT' = Final temperature of the gas.

Make T' The subject of the equation

T' = V'T/V............. Equation  2

From the question,

Given:

V = 2.24 LV' = 1.66 LT = 52 °C

We need to convert the initial temperature T above from °C to Kelvin (K) by adding 273.

T = (273+52) = 325 K

Substitute these values into equation 2

T' = (1.66×325)/2.24T' = 539.5/2.24T' = 240.85 K.T' = -32.15 °C.

Hence, The new temperature of the gas is -32.15 °C.

Learn more about Charles's law here: https://brainly.com/question/25290815


Related Questions

If right you will be marked brainiest :)

Answers

Answer: They are the same species and have the same traits.

Explanation: These horses are well, the same species because they are horses.  They have very similar traits.  

Let me know if this is right!

2. During which of the following stato changes would the particles in the matter become more spread out?
changing from liquid to gas?
changing from gas to liquid?
changing from gas to solid?

Answers

Answer

changing from liquid to gas

Explanation

changing from liquid to gas

pLEASEEE HELPPP QUICCKKK

Answers

Answer:

a. carbonyl

Explanation:

this is acetaldehyde, and aldehydes are compounds that contain a carbonyl which is carbon double bonded with oxygen, and that carbonyl is bonded with at least one hydrogen atom.

Type the correct answer in the box. Express your answer to three significant figures. Sodium hydroxide and magnesium chloride react as shown by this equation: 2NaOH MgCl2 → Mg(OH)2 2NaCl. Suppose the reaction begins with 637 milliliters of 1. 35 M sodium hydroxide solution and excess magnesium hydroxide. What is the theoretical yield of magnesium hydroxide if the resulting solution has a volume of 2. 82 liters? Use the periodic table and the polyatomic ion resource. The mass of magnesium hydroxide formed is grams.

Answers

25.07grams is the theoretical yield of magnesium hydroxide if the resulting solution has a volume of 2. 82 liters.

How we calculate the mass from moles?

Mass of any substance will be calculated from moles as:

n = W/M, where

W = given or required mass

M = molar mass

Given chemical reaction is:

2NaOH + MgCl₂ → Mg(OH)₂ + 2NaCl

From the stoichiometry of the reaction, it is clear that:

2 moles of NaOH = produce 1 mole of Mg(OH)₂

1 mole of NaOH = produce 1/2 mole of Mg(OH)₂

Given concentration of NaOH = 1.35M

Given volume of NaOH = 637mL = 0.637L

Moles of NaOH will be calculated as:

M = n/V

n = 1.35M × 0.637L = 0.859 moles

So, 0.859 moles of NaOH = produce 0.859×1/2 = 0.429 moles of Mg(OH)₂

Now, we convert this moles into grams by using the above formula:

0.429 = W/58.31 g/mole

W = 25.07grams

Hence, 25.07grams is the theoretical yield of magnesium hydroxide.

To know more about moles, visit the below link:

https://brainly.com/question/24631381

What are three reasons that using renewable energy is important.

Answers

Answer:

1. they reduce green house gases

2. they can last a long time and come back pretty much every year and some never run out

3. we have unlimited supply of most if not all renewable resources

Explanation:

hope this helps!

Convert 30.0g of water to moles
please help

Answers

Answer:

1.7

Explanation:

  1 grams Water to mol = 0.05551 mol

30 grams Water to mol = 1.66525 mol

if we round that up the answer is 1.7

What is the volume of 5 moles of oxygen gas at r.t.p ?

Answers

Explanation:

[tex]5mol \times \frac{22.4lit}{1mol} = 112lit[/tex]

A gas occupies a volume of 567 mL at 35. 0 oC and 99 kPa. What is the volume of the gas at 273

K and 101. 3 kPa?

Answers

Answer:

0.00 °C = 273 K. 1.00 atm = 760.0 mm Hg = 101.325 kPa = 101,325 Pa. 273 1.

Explanation:

One year, a herd of cattle released 2.44 metric tons of CH4 (methane) into the atmosphere. How many metric tons of carbon did this methane contain

Answers

The mass, in metric tons, of carbon in the methane is 1.83 metric tons

Calculating mass in a substance

From the question, we are to determine the quantity of carbon in the methane

The mass of carbon in the methane can be calculated from

Mass of carbon in the methane = [tex]\frac{Mass\ of\ carbon\ in\ a\ molecule\ of \ methane}{Mass\ of\ a\ molecule\ of \ methane}\times Total\ mass\ of\ the\ methane[/tex]

Mass of carbon in a molecule of methane = 12 g

Mass of a molecule of methane = 16 g

Therefore,

Mass of carbon in the methane = [tex]\frac{12}{16} \times 2.44[/tex]

Mass of carbon in the methane = 1.83 metric tons

Hence, the mass, in metric tons, of carbon in the methane is 1.83 metric tons

Learn more on Calculating mass in a substance here: https://brainly.com/question/4798143

A 50 mL sample is held at 100 kPa. What pressure does it exert when the gas is compressed to 40 L.
Who's Law did you use?​

Answers

Newton's third law

Explanation:

Which do you think will cool the fastest?
sand
water
air
metal

Answers

The answer is the first one sand

Carbon dioxide has a relatively high solubility in blood plasma, although it has a very low partial pressure. What law describes this phenomenon

Answers

Answer:

The bulk of carbon dioxide is carried chemically combined with the amino acids of hemoglobin as carbaminohemoglobin in the RBCs.


chemistry help please!!!

Answers

This looks like a gravimetric analysis problem. The answer is C. The other answers seem very unlikely because if some products was lost then the product would weigh less than it actually does. The last one is unreasonable because we were not provided enough information in the problem to be able to say that. Miscalculations are also unlikely.

The chemical equation below shows the combustion of methane (ch4). ch4 2o2 right arrow. co2 2h2o the molar mass of oxygen gas (o2) is 32.00 g/mol. the molar mass of carbon dioxide (co2) is 44.01 g/mol. what mass of co2, in grams, will form when 8.94 g o2 completely react? 3.25 grams 6.15 grams 13.0 grams 53.0 grams

Answers

6.15 grams of carbon dioxide is form when 8.94 g of oxygen is completely react.

How we calculate mass from moles?

Mass of any substance will be calculated from moles as :

n = W/M, where

W = required mass

M = molar mass

Given combustion reaction is:

CH₄ + 2O₂ → CO₂ + 2H₂O

Given mass of O₂ = 8.94 g

Molar mass of O₂ = 32.00 g/mole

Moles of O₂ = 8.94 / 32 = 0.279 mole

From the stoichiometry of the reaction, it is clear that:

2 moles of O₂ = produce 1 mole of CO₂

0.279 moles of O₂ = produce 1/2×0.279 = 0.139 moles of CO₂

Molar mass of CO₂ = 44 g/mole

Required mass of CO₂ will be calculated as:

W = n × M

W = 0.139 × 44 = 6.15 grams

Hence, option (2) is correct i.e. 6.15 grams.

To know more about moles, visit the below link:

https://brainly.com/question/15374113

Answer:

Option 2/ B. 6.15 grams on edge.

Explanation:

S/o to the person above me, got it because of them.

A 1.00 l volume of hcl reacted completely with 2.00 l of 1.50 m ca(oh)2 according to the balanced chemical equation below. 2hcl ca(oh)2 right arrow. cacl2 2h2o what was the molarity of the hcl solution? 0.375 m 1.50 m 3.00 m 6.00 m

Answers

6 M is the molarity of the HCl solution with volume 1 liter.

How we calculate molarity?

Molarity (M) of solution is define as the number of moles (n) of solute present in per liter (V) of solution, i.e. M = n/V.

Given chemical reaction is:

2HCl + Ca(OH)₂ → CaCl₂ + 2H₂O

Given volume of HCl = 1 L

Given volume of Ca(OH)₂ = 2 L

Molarity of Ca(OH)₂ = 1.50M

Moles of Ca(OH)₂ = 1.50 × 2 = 3 moles

From the stoichiometry of the reaction:

1 mole of Ca(OH)₂ = react with 2 moles of HCl

3 mole of Ca(OH)₂ = react with 2×3=6 moles of HCl

Molarity of HCl will be calculated by using the above given formula as:

M = 6/1 = 6M.

Hence, option (4) is correct i.e. 6 M.

To know more about molarity, visit the below link:

https://brainly.com/question/16343005

Answer:

D

Explanation:

trust

(c) Graphite is another naturally-occurring form of carbon.
Graphite can be used in pencils because it is soft and can leave marks on paper.
Graphite can also be used as a conductor of electricity.
Explain why graphite is soft and conducts electricity.
Refer to structure and bonding in your answer.
(5)
DO NOT WRITE IN THIS AREA

Answers

Graphite is a fantastic lubricant and a powerful electrical conductor because of these unbound electrons.

What is the purpose of Unbound?

Unbound can serve as a caching server, it can also perform recursion, store records obtained from other DNS servers, and provide an authoritative service, such as if you only have a few zones.

As a result, it can act as a "glue" server or host a small zone with only a few domains, making it ideal for a lab.

Why need to utilize Unbound DNS?

With its harden-glue, access control, maximum randomization for request ID and ports, response scrubbing, case preservation, plus Denial of Service or DoS prevention capabilities, Unbound is feature-rich with DNS Security. These are only a few.

Therefore, graphite is a fantastic lubricant and a powerful electrical conductor because of these unbound electrons.

To know more about Unbound electrons visit:

https://brainly.com/question/14657932

#SPJ1

2 Ca + O2 2 CaO

If this reaction occurs with 5 moles of Ca and 5 moles of O2, how much CaO will be produced?

Answers

Answer:

5mol at most

Explanation:

as we hv 5mol Ca available, the 5 mol Ca can react with 5/2 = 2.5mol O2, as we have more mol of O2 than that Ca can react with, Ca is the limiting reactant. Therefore at most 5/2x2 = 5 mol of CaO can be made

Will give brainliest... what is the [OH-] of a solution whose pOH is equal to 2.86

Answers

Answer:

the pOH of a solution is the negative logarithm of the hydroxide-ion concentration. by this yields a [OH − ] of 1.0 × 10 -10 M. Finally the pOH of the solution equals -log(1.0 × 10 -10 ) = 10.Explanation:

The concentration of hydroxide ion of a solution whose pOH value is equal to 2.86 is 1.38×10⁻³ M.

How do we calculate the concentration of OH⁻?

Concentration of hydroxide ion will be calculated by using the pOH value by using the below equation as:

pOH = -log[OH⁻]

[OH⁻] = [tex]10^{-pOH}[/tex]

Given that value of pOH = 2.86

On putting values we get,

[OH⁻] = [tex]10^{-2.86}[/tex]

[OH⁻] = 0.00138 = 1.38×10⁻³ M

Hence concentration of hydroxide ion is 1.38×10⁻³ M.

To know more about pOH & [OH⁻], visit the below link:
https://brainly.com/question/26984550

Examine the picture above. What process does it represent?

Answers

Answer:

The formation of water from hydrogen and oxygen

Explanation:

Convert 220 grams of co2 into moles.

Answers

Answer:

5 moles

Explanation:

By convert grams to moles u need to divided the number of grams to the molar mass

220 ÷ 44.01 = 4.9 ≈ 5.0

Why is the? The second ionization energy of sodium is about three times greater than the second ionization energy of magnesium

Answers

Answer:

~Na+1 is already in the preferred form. Because of this, the second ionization energy of sodium is higher than normal. Mg+1 loses an electron to form s2 p6 .

2N₂ + 5 0₂2 N₂O5 What mass of nitrogen is required to react with 5.04 grams of oxygen?​

Answers

Answer:

1.76g of N

Explanation:

5.04g x 1mol/16mol x 2mol/5mol x 14.01g/1mol = 1.76g

1. Natural gas is considered a nonrenewable resource because


​​​​​​​A. It takes millions of years to form.

​​​​​​​A. It takes millions of years to form.,

​​​​​​​B. It is very expensive to make.

​​​​​​​B. It is very expensive to make.,

​​​​​​​C. It produces pollution when burned.

​​​​​​​C. It produces pollution when burned.,

​​​​​​​D. It cannot be used to generate electricity.

Answers

Answer:

hope this is help helpful

Explanation:

natural gas are considered nonrenewable because they can not be replenished in a short period of time.

Which choice describes climate? In March 1971, Canada was hit by a major blizzard and up to 32 inches of snow fell. The U.S. gulf coast was hit by Hurricane Katrina in 2005 and suffered extensive damage. The U.S. gulf coast typically has warm, wet weather and tropical storms during the summer and fall. An extremely dangerous tornado hit Jarrell, Texas in 1997 destroying 40 homes.

Answers

Answer:

Its C

Explanation:

If you look, you can see that it tells you the humidity and the that its warm but it also tells you that it storms a little to and that makes it easier to know the climate but if it just sayed it was warm that wouldn't be enough information

CAN I PLS HAVE BRAINLIEST. I NEVER GET IT. ITS A LITTLE CROWN UNDER MY ANSWER. PLS. ILL GIVE YOU BRAINLIEST JUST PLS

Somebody help me? my head hurts here

1.between which two points is the car accelerating at the greatest rate?

2.between which two points is the car travelling at a steady speed?

3.what is the acceleration of the car between C and D?

4.between which two points is the acceleration getting bigger and bigger?

5.what is the acceleration of the car between D and F?​​

Answers

Answer 1 :

[tex]\green{\sf{D \: and \: E}}[/tex]

Step-by-step explanation:

As per graph, the highest lines are D and E. They are increasing.

Answer 2:-

[tex]\sf{\blue{B \: and \: C}}[/tex]

Step-by-step Explanation:

It is because the line between B and C is straight, indicating that it is steady.

Answer 3:-

[tex]\sf{\pink{2 \: m/s}}[/tex]

Step-by-step Explanation:

Its because the interval between line CD can be taken as-

[tex]\sf{40-50 = 1 m/s} \\ \sf{50-60 = 2 m/s}[/tex]

Hence, 2 m/s.

Answer 4:

[tex]\sf{\red{A \: and \: E}}[/tex]

Step-by-step Explanation:

We can see from the graph that the change in lines us occurring between initial and final points, i.e., between A and E.

Answer 5:

[tex]\sf{\purple{1m/s}}[/tex]

Step-by-step Explanation:

This is because, we can consider the interval between points D and E as :-

[tex]\sf{60-70=1m/s}[/tex]

Write the name of the Formula, Chromium(III) Sulfide

Answers

Answer:

Cr2S3

Explanation : Cr is +3

S is - 2 so when balancing it will give Cr2S3

During a lab, 1.62g of COCl2 · x H2O were heated. After heating, only 0.88g of COCl2 remained. Calculate the formula of the hydrate.
Show your work.
You have to break down the cobalt chloride and water by finding the mass of each and using empirical formula.

Answers

Answer:

Explanation:

Let the number of moles of water in the required formula be "y".

The final formula should be in the form of : CoCl2 yH2O

1.62 g is the weight of CoCl2 and water in the sample

After heating, the remaining mass represents  the mass the salt only

mass of water in sample = 1.62 - 0.88 = 0.74 g

From the periodic table:

molar mass of cobalt is 59 g

molar mass of chlorine is 35.5

molar mass of hydrogen is 1

molar mass of oxygen is 16

molar mass of formula = 59 + 2(35.5) + 18y = 130 + 18y g

Now we have calculate the mass/molar mass for each part of the formula (salt and water) and equate them to get number of moles of water as follows:

0.88 / 130 = 0.74 / y18

y = 6.07 which is approximately 6 moles

Thus, the final formula is CoCl2 6H2O. This hydrate is called cobalt(II)chloride hexahydrate.

give brainliest.

ii) Adding common salt to distilled water makes it a) Good conductor b) Insulator c) Both a &b a​

Answers

Answer:

Explanation:

Salt + water gives an adequate conductor. It is not absolutely wonderful like silver, but it will conduct electricity to varying degrees depending on the depth of salt water that the conductor is held at.

I'd say A.

Which two correctly relate the attraction between the particles of a liquid and
the temperature at which the liquid changes state?
A. Strong attractions mean the liquid melts at a lower temperature.
B. Strong attractions mean the liquid boils at a lower temperature.
C. Strong attractions mean the liquid boils at a higher temperature.
O D. Strong attractions mean the liquid melts at a higher temperature.

Answers

Answer:

C & D

Explanation:

The attractive force between particles of a liquid determines the temperature at which the liquid changes state: the stronger the attraction, the larger amount of energy is required to break the bonds to boil; i.e. at a higher temperature. So C. Strong attractions mean the liquid boils at a higher temperature is correct.

By the same reasoning, the stronger attractive force between particles also means that it takes more energy to change state from solid to liquid; i.e. a higher melting point.  So D. Strong attractions mean the liquid melts at a higher temperature is also correct.

Using one specific example, explain why the human genome project
considered important.

Answers

Answer:

initiated the comprehensive discovery and cataloguing of a 'parts list' of most human genes 

Explanation:

Other Questions
NO LINKS!!! Part 12 Please help me with this problem It would help if you all could give me some guidance on this question. If you can help thank you very much :) Which of the following is an appropriate guideline for maintaining safety when using sharps 1+1=Answer for 100 points please Can someone please help me with number 6? definenition of the climate changes Julio has found that his new car gets 32 miles per gallon on the highway and 27 miles per gallon in the city. He recently drove 283 miles on 9 gallons of gasoline. How many miles did he drive on the highway? How many miles did he drive in the city? What is 9 to the power of 2? A 10 liter tank of CO2 is at a pressure of 3.5 atm and a temperature of25C. How many moles of CO2 are in the tank? A boy has a 17-decimetre yellow string and a 44-decimetreblue string. How much longer is the blue string than theyellow string? someone help me with this please i need this badly Which describes the horizontal cross section of the given right rectangular prism? A. A rectangle with dimensions of 15 inches and 16 inches. B. A rectangle with dimensions of 15 inches and 7 inches. C. A rectangle with dimensions of 9 inches and 15 inches. D. A rectangle with dimensions of 9 inches and 7 inches. If I need to write 11.7 to the nearest tenth would 10 technically right? A car accelerates on a horizontal surface, with friction, over a distance. Which equation is equal to the work done by the engine of the car?A. (change in kinetic energy of the car) + (frictional force) (distance) B. (change in kinetic energy of the car) - (friction energy) (distance) C. (change in momentum of the car) - (friction energy) (distance) D. (change in potential energy of the car) + ( frictional energy) (distance) identify the correct solution to the problem 3 x 9/10 please help i am very stressed :( Write a story to illustrate the saying."thos who live in a glass house should not throw stones " describe the roles of innovation and change to facilitate supply chain operation If the front of an active glacier is observed to be stationary, it is correct to infer that the ice in the glacier is 1: What function is the inverse of the exponential function y = 3?a) y=xb) y = 3c) y = log Xd) y = log 34: What is the best estimate of the value of in 16?a) 1.20b) 2.77c) 3.23d) 4.005: Which of the following logarithmic expression have been evaluated correctly? Select all that apply.a) In 1 = 0b) log 9 = 3c) log 1/100 = 1/2d) log (-1) = 1/3e) log 1/125 = -5