Answer:
Let's define:
The position zero will be in the first point where the truck and police car meet. (So the initial position of both vehicles is zero)
Then, the position equation for the truck is:
T(t) = 20m/s*t
Where t is our variable, time in seconds.
Now, at t = 5s, the car starts accelerating.
Ac(t) = 2m/s^2 for( t ≥ 5s)
For the velocity of the car, we must integrate that.
V(t) = (2m/s^2)*(t - 5) for (t ≥ 5s)
Where i introduced a little change in the variable because the velocity of the car starts to increase for t larger than 5 seconds.
For the position of the car we integrate again.
C(t) = (1m/s)*(t - 5)^2 for (t ≥ 5s)
Now, let's answer the questions:
Determine the time at which the speed of the truck is equal to the speed of the police car.
Then we must have:
V(t) = (2m/s^2)*(t - 5) = 20m/s. (Remember that we only can use times requal or larger than 5 seconds).
2m/s^2*t - 10m/s = 20m/s
2m/s^2*t = 30m/s
t = (30/2) s = 15s
The velocities of both vehicles will be the same after 15 seconds.
t1 = 15s
How the positions will compare at this time?
The easier thing will be to evaluate the position equation of each vehicle in this time:
T(15s) = 20m/s*15s = 300m
C(15s) = (1m/s^2)*(15s - 5s)^2 = (1m/s^2)*(10s)^2 = 100m.
Then we can see that the truck is 200m ahead of the car.
But remember that the police car is accelerating, so the velocity will keep increasing meaning that eventually, the car will catch the truck.
Question 4 of 20
Luke wraps a magnetized steel nail with several coils of insulated wire and
then connects the loose ends of the wire to a 10 W lightbulb. Which step
could he take next to get the lightbulb to light up?
O A. Replace the magnetized nail with a nonmagnetic metal to cause
an electric current to flow in the wire.
O B. Remove the magnetized nail from the wire coil to induce a
magnetic field that will flow through the wire.
C. Move the magnetized nail back and forth within the wire coil to
induce an electric current in the wire.
D. Add several more coils of the wire around the magnetized nail to
make a stronger electric current.
SUBMIT
Answer:
C. Move the magnetized nail back and forth within the wire coil to induce an electric current in the wire.
Hope this helps.
What will be acceleration due to gravity of a feather and coin if
they are dropped in vacuum?
Explanation:
Hey there!
We know that the objects in vacuum falls equally on the surface or bottom. As there is no air resistance in vacuum, the objects has equal stabdard acceleration. (i.e g = 9.8m/s^2)
So, the acceleration due to gravity is 9.8m/s^2.
Hope it helps....
If an object is moving with constant acceleration, its velocity must
a
change by varying amounts depending on its speed.
b
always decrease.
c
be constant also.
d
change by the same amount each second.
A force of 75 N at an angle of 15° to the direction of motion moves a chair 3 m. Which change would result in more work being done on the chair?
Answer:
Decreasing the angle to 10
Explanation:
Edge 2020
Eclipses occur because the Moon?
A
does not create its own light and only reflects light from the Sun.
o
does not create its own light and only reflects the light from Earth.
o
с
creates its own light, which is blocked by the Sun during an eclipse.
creates its own light, which is blocked by Earth during an eclipse.
Answer:
с
creates its own light, which is blocked by the Sun during an eclipse.
Explanation:
might not be right but its what i remember
What the meaning of centerpiece
Answer:
1 : an object occupying a central position especially : an adornment in the center of a table. 2 : one that is of central importance or interest in a larger whole the centerpiece of a political agenda.
Explanation:
How do electromagnetic waves affect you?
Answer:
At low frequencies, external electric and magnetic fields induce small circulating currents within the body. ... The main effect of radiofrequency electromagnetic fields is heating of body tissues. There is no doubt that short-term exposure to very high levels of electromagnetic fields can be harmful to health.
The photo shows dew drops that formed on the grass when temperatures
cooled during the night. Which change of state happened to form the dew?
A. Liquid to gas
B. Gas to liquid
C. Solid to gas
D. Gas to solid
how much force is needed to accelerate 300 kg at a rate of 4 m/s/s
Answer:
1200
Explanation:
Force = Mass x Acceleration
Answer:
[tex]\boxed {\tt 1,200 \ Newtons }[/tex]
Explanation:
Force can be found by multiplying the mass by the acceleration.
[tex]F=m*a[/tex]
The mass is 300 kilograms.
The acceleration is 4 meters per second squared.
[tex]m= 300 \ kg\\a= 4 \ m/s^2[/tex]
Substitute the values into the formula.
[tex]F= 300 \ kg * 4 \ m/s^2[/tex]
Multiply.
[tex]F= 1200 \ kg * m/s^2[/tex]
1 Newton is equal to 1 kilograms meters per second squared, so our current answer of 1200 kg m/s² is equal to 1200 Newtons.
[tex]F= 1200 \ N[/tex]
The force needed is 1,200 Newtons.
An space probe built on Earth has a mass of 750 kg. Calculate the weight of the space probe on Earth.
Answer:
7357.5N
Explanation:
Weight is the force used to pull a mass of object towards the centre of the Earth. The force is 9.81 N/kg.
so, Weight = mass × 9.81
the weight of the space probe should be: 750 × 9.81 = 7357.5 N
Answer:
7350N
Explanation:
Data
m-750kg
g-9.8
W=mg
=750 x 9.8
=7350N
A runner moves at an average speed of 3.0 m/s and covers 9.5 km. In seconds, how long does the run take?
28.5 s
29.0 s
3.16 s
3200 s
Answer:
3200 seconds
Explanation:
If he ran at 3 m/s for 28.5 seconds, he would have run 85.5 meters
29 seconds would be 87 meters run not 9.5 km
Which words help you to determine the meaning of the word decelerate in paragraph 3
Answer:
the words
Explanation:
Answer:
Pressing the brake pedal
Explanation:
Decelerate sounds a lot like the word accelerate, but we know that the speed is decreasing, so it would have to be going down, getting slower, so whichever sounds like a good example of speed decreasing should be a good answer!
please help
Which equipment is best to hold and to measure liquids?
A). flask and graduated cylinder
B). scale and ruler
C). caliper and thermometer
D). stopwatch and beaker
Answer:
I'm pretty sure that the answer is A
An ant is crawling along a yardstick that is pointed with the 0-inch mark to the east and the 36-inch mark to the west. It starts at the 14-inch mark, crawls to the 20-inch mark, then moves to the 16-inch mark. What was the total distance the ant traveled?
Given :
An ant is crawling along a yardstick that is pointed with the 0-inch mark to the east and the 36-inch mark to the west.
It starts at the 14-inch mark, crawls to the 20-inch mark, then moves to the 16-inch mark.
To Find :
The total distance the ant traveled.
Solution :
Total distance travelled by ant = (distance between 14 and 20 inch mark) +
(distance between 20 and 16 inch mark)
Total distance = (20-14 ) + ( 20-16) = 6 + 4 = 10 inch.
Therefore, total distance the ant traveled is 10 inch.
Hence, this is the required solution.
Classify each of the following chemical reactions. Upper S plus upper O Subscript 2 right arrow upper S upper O subscript 2. Upper C a upper C l subscript 2 plus 2 upper A g upper N upper O subscript 3 right arrow upper C a (upper n upper O subscript 3) subscript 2 plus 2 upper A g upper C l. Upper Z n plus upper C u upper S upper O subscript 4 right arrow upper C u plus upper Z n upper S upper O subscript 4. 2 upper N a subscript 2 upper O right arrow 4 upper N a plus upper O subscript 2.
Answer:
synthesis and combustion
double replacement
single replacement
decomposition only
in that exact order edge 2020
The presented reactions are:
S + O₂ ⇒ SO₂ Synthesis or combination
CaCl₂ + AgNO₃ = Ca(NO₃)₂ + 2 AgCl Double displacement
Zn + CuSO₄ = Cu + ZnSO₄ Single displacement
2 Na₂O = 4 Na + O₂ Decomposition
Let's consider and classify the following reactions.
S + O₂ ⇒ SO₂
This is a synthesis or combination reaction. 2 compounds combine to form another.
CaCl₂ + AgNO₃ = Ca(NO₃)₂ + 2 AgCl
This is a double displacement reaction. Both compounds exchange their cations and anions.
Zn + CuSO₄ = Cu + ZnSO₄
This is a single displacement reaction. A metal displaces other metal from its salt.
2 Na₂O = 4 Na + O₂
This is a decomposition reaction. A compound decomposes into 2 other compounds.
The presented reactions are:
S + O₂ ⇒ SO₂ Synthesis or combination
CaCl₂ + AgNO₃ = Ca(NO₃)₂ + 2 AgCl Double displacement
Zn + CuSO₄ = Cu + ZnSO₄ Single displacement
2 Na₂O = 4 Na + O₂ Decomposition
Learn more: https://brainly.com/question/21392527
1 point
1)A 1 kg brick is carried to up the Eiffel Tower to the 275 m platform. How
much gravitational potential energy does it acquire?
Answer:
The gravitational potential energy is 2,750 Joules
Explanation:
Given the following data;
Mass of brick = 1kg
Height of Eiffel Tower = 275m
Potential energy can be defined as the energy possessed by an object due to its position.
Mathematically, potential energy is;
[tex] P = mgh[/tex]
Also, we know acceleration due to gravity = 10m/s2
[tex] P = mgh[/tex]
[tex] P = 1 * 275 * 10 [/tex]
P = 2750 Joules.
Hence, the gravitational potential energy the brick acquired is 2750 Joules.
List out Units For: Acceleration
Unit for Acceleration is m/s² or ms raised to -2
How are velocity, wavelength, and frequency related
Answer:
The wave velocity and the wavelength are related to the wave's frequency and period by vw=λT or vw=fλ. The time for one complete wave cycle is the period T. The number of waves per unit time is the frequency ƒ. The wave frequency and the period are inversely related to one another.
Explanation:
what does the galaxy made of ?
Biomes on Earth have exhibited changes throughout history that have been caused by a variety of factors. Over the past 50 years, the amount of tropical rainforest acreage found throughout the world has decreased from 14.8 billion acres to 8.6 billion acres due to deforestation. What factor is likely most responsible for the changes observed in the world's rainforests? a. volcanic activity b. human activity c. temperature changes d. solar eclipses Please select the best answer from the choices provided A B C D
Answer:
b
Explanation:
The factor that is most likely to be responsible for the changes observed in the world's rainforest is human activities.
There has been a surge in the human population leading to an increased need for housing, foods, and other infrastructures. All these needs are directly or indirectly provided by the forest. Hence, the more the population of human expands, the more pressure that would be exerted on the rainforest and, indeed, other forests of the world.
The correct option is b.
which one of the following is a derived Si unit a. Newton, b. Meter, c. Mole, d. Kiogram
Answer:
The SI is founded on seven SI base units for seven base quantities assumed to ... The SI derived units for these derived quantities are obtained from these ... mass density, kilogram per cubic meter, kg/m3 ... amount-of-substance concentration, mole per cubic meter, mol/m3 ... solid angle, steradian (a), sr (c), -, m2·m-2 = 1 (b).
Kilogram is a derived SI unit of the following.
Thus, A universal standard for expressing the magnitudes or quantities of significant natural events is the International System of Units.
The acronym SI, which derives from the French term Systèm international stands for the System of Units, also known as the metric system. The meter-kilogram-second (MKS) system, an earlier unit of measurement, serves as the foundation for the SI standard.
The SI standard is promoted and explained by the Bureau international des poids et mesures (BIPM). The organization was founded in 1875 and is known as the International Bureau of Weights and Measures in English. It is governed by the International Committee for Weights and Measures (CIPM).
Thus, Kilogram is a derived SI unit of the following.
Learn more about Kilogram, refer to the link:
https://brainly.com/question/29761698
#SPJ2
Why does sonar use ultrasound rather than sound?
Answer; Ultrasonic waves (sounds having frequency greater than 20,000 Hz) are used in sonar because: ... Ultrasonic waves can penetrate water to long distances (because of their high frequency and very short wavelength), but ordinary sound waves or infrasonic waves cannot penetrate water to such long distances.
Answer:
Ultrasonic waves (sounds having frequency greater than 20,000 Hz) are used in sonar because: ... Ultrasonic waves can penetrate water to long distances (because of their high frequency and very short wavelength), but ordinary sound waves or infrasonic waves cannot penetrate water to such long distances
Explanation:
#7 If the Moon’s mass was suddenly tripled, what would occur to the gravitational force between the Earth and the Moon?
(A) Gravitational force would increase by a factor of 3.
(B) Gravitational force would decrease by a factor of 3.
(C) Gravitational force would increase by a factor of 9.
(D) Gravitational force would decrease by a factor of 9.
Answer:
well it would be (A) Gravitational force would increase by a factor of 3.
Explanation:
because the moon is the only thing that gained mass not the Earth
Which image shows an example of the electromagnetic force in action?
Answer:
the answer is A the one that has the green ball as particles
Explanation:
The second image showing an electromagnet is an example of the electromagnetic force in action therefore the correct option is B
What is electromagnetic force?It is a type of force that occur between electrically charged particles. The electromagnetic force is the combination of all the electrical and magnetic forces generated from any charged particle,
These electromagnetic forces either be attractive or repulsive.
The force generated from a simple bar magnet is an example of the electromagnative force, hence the correct option is B
Learn more about electromagnetic forces
https://brainly.com/question/13191643
#SPJ5
Which model of the atom has electrons traveling in specific paths around the nucleus? Bohr's model Rutherford's model Thomson's model Dalton's model
Answer:
A, Bohr's model
Explanation:
Took the quiz, hope it's right for you.
(The other three did have something to do with it they just didn't create that specific model)
The model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.
Therefore, the correct answer is option B
J. J Thomson proposed that the atom is a sphere of positively charged matter in which negatively charged electron are embedded.
In Rutherford's model of atomic structure, the electrons moves in orbits by electrostatic attraction to the positively charged nucleus.
According to Dalton's atomic theory, atom were indestructible and indivisible solid particle.
Bohr's model made assumption that electron can only exist in circular orbits of definite quantum energy.
According to the question, the model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.
Therefore, the correct answer is option B
Learn more here : https://brainly.com/question/16776207
Protons are found only in the atomic nucleus.
TRUE
FALSE
Answer:
true
Explanation:
Protons and neutrons are found in the nucleus
It is your parent's 25th Wedding Anniversary and you thought it would be special to throw them a surprise party. Your entire family is up north at your Traverse City cottage (240 miles from your home) and you plan on waking up early Saturday morning to drive home and set up for the party. You wake up at 10:00 am to head out but to your surprise your parents decide on leaving at 11:00 am instead of 1:00 pm like they originally planned. Your father ALWAYS drives 60 miles per hour on the expressway and it will take you about 2 hours to set up for the party. How fast must you drive in order to get home in enough time to make the surprise a success? Show your work.
Answer:
120 miles per hour.
Explanation:
We need to find the time it takes my parents to drive home from the cottage. Since my father drives at 60 miles per hour, and the cottage is 240 miles from our home, and distance = speed × time. So, time = distance/speed = 240 mi/60 mi/h = 4 h.
So, it will take my father 4 hours to drive home from the cottage.
Since I have 2 hours to prepare for the party, the time left for me to drive to the cottage is 4 - 2 hrs = 2 hrs.
So, I'm supposed to drive to the cottage in at most 2 hours.
The speed at which I must drive in this time period is thus, speed = distance/time = 240 miles/2 hours = 120 miles per hour.
So, I must drive at a minimum speed of 120 miles per hour.
A toy car rolls down a hill starting from rest. After 4.2 seconds its velocity is 18 meters per second. What is the acceleration of the car ?
SOMEONE PLZ HELP :(
WILL MARK BRAILIEST
Answer: if this is the same question I think it’s 24
Explanation:
Dos pilotos suicidas, que están inicialmente a una distancia de 500 m entre sí, deciden chocar directamente de frente arrancando ambos desde el reposo. Ambos autos pueden desarrollar una aceleración máxima constante de 15 m/s2 . Si el piloto A arranca un segundo antes que el piloto B, encuentra: a) la posición donde los autos chocan, medida a partir de la posición donde arranca el piloto A, y b) la rapidez relativa de la colisión (la rapidez de B con respecto a A justo antes de la colisión, ó viceversa).
Answer:
a) El punto de colisión de los dos automóviles desde donde parte el conductor del automóvil A es de aproximadamente 293,14 metros.
b) La velocidad del automóvil A, en relación con la velocidad del automóvil B, es de 15 m / s
Explanation:
Los parámetros del movimiento son;
La distancia entre ambos coches = 500 m
La aceleración de ambos coches = 15 m / s²
La dirección de movimiento de ambos coches = uno hacia el otro
La hora de inicio del conductor A = Un segundo antes de la hora de inicio del conductor B
Por lo tanto, de la ecuación de movimiento, tenemos;
s = u · t + 1/2 · a · t²
v² = u² + 2 · a · s
Dónde;
u = La velocidad inicial de los autos = 0 (los autos parten del reposo)
t = El tiempo de movimiento de una aceleración dada
a = La aceleración = 15 m / s²
s = La distancia recorrida en el tiempo t
Por lo tanto, para el controlador A, tenemos;
s₁ = 0 × (t + 1) + 1/2 × 15 × (t + 1) ² = 7.5 × (t + 1) ²
s₁ = 7.5 × (t + 1) ²
Para el conductor B, tenemos;
s₂ = 0 × t + 1/2 × 15 × t² = 7.5 × t²
s₂ = 7,5 × t²
Dado que ambos chocan a lo largo del camino de 500 m, tenemos;
s₁ + s₂ = 500 metros
∴ 7.5 × (t + 1) ² + 7.5 × t² = 500
∵ s₁ + s₂ = 7.5 × (t + 1) ² + 7.5 × t²
Lo que da;
15 · t² + 15 · t + 7.5 = 500
15 · t² + 15 · t - 492,5 = 0
Resolver usando la aplicación en línea da; t = -6,25181 o t = 5,25181
Dado que t es un número natural, tenemos el valor correcto para t = 5.25181 segundos
a) Por tanto, el punto de colisión de los dos coches desde donde parte el conductor del coche A es;
s₁ = 7.5 × (t + 1) ² = 7.5 × (5.25181 + 1) ² ≈ 293.14 metros
El punto de colisión de los dos automóviles desde donde parte el conductor del automóvil A ≈ 293,14 metros
b) La semilla de A en el punto de colisión se da de la siguiente manera
Velocidad, v₁ = u + a × (t + 1) = 0 + 15 × (5.25181 + 1) ≈ 93.78
v₁ ≈ 93,78 m / s
La semilla de B en el punto de colisión también se da de la siguiente manera
Velocidad, v = u + a × (t) = 0 + 15 × 5.25181 ≈ 78.78
v₁ ≈ 78,78 m / s
Por lo tanto, la velocidad del automóvil A, en relación con la velocidad del automóvil B, [tex]v_{relative}[/tex] se da como sigue;
= v₁ - v₂ = 93,78 m / s - 78,78 m / s = 15 m / s
la velocidad del automóvil A, relativa a la velocidad del automóvil B = 15 m/s.
Define what velocity means.
Answer:
The velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time. Velocity is equivalent to a specification of an object's speed and direction of motion (e.g. 60 km/h to the north).