An airplane propeller rotates with an angular speed of 260rad/s. Through what angle does the propeller rotate in 5.0s? Give your answer in both radians and degrees

Answers

Answer 1

Answer:

I hope this will help......

An Airplane Propeller Rotates With An Angular Speed Of 260rad/s. Through What Angle Does The Propeller
An Airplane Propeller Rotates With An Angular Speed Of 260rad/s. Through What Angle Does The Propeller

Related Questions

pls help me to answer this​

Answers

Answers:

Geography (geo-gra-phy)Location (lo-ca-tion)Coordinates (co-or-di-nates)Landmass (land-mass)Absolute (ab-so-lute)Vicinal (vi-ci-nal)Insular (in-su-lar)Relative (re-la-tive)

Note: It's very likely the tile labeled "MAL" should be "NAL", and that "MATES" should be "NATES".

==================================

Explanations:

Geography deals with not only places, but also the people and cultures in those places. That's more of a social or human geography course. Natural geography talks about land formations, volcanos, rivers, etc.I'm not sure there's much to say about this term. It's simply a position in 2D or 3D space depending on context.Coordinates are things like longitude and latitude. Think of the (x,y) points on a grid. Side note: The tile "mates" should be labeled as "nates". Your teacher made a typo. In some dialects, the "co" and "or" are pronounced together; almost sounding like "core". The term "landmass" is exactly what you'd expect it should be: a big chunk of land. When you mention if a person has absolute freedom, then we consider that person having no restrictions of movement/choice/etc. It also refers to something like a local coordinate space talks about the surrounding area, whereas an absolute coordinate space doesn't have to worry about such issues. Eg: a local coordinate could be "go 5 blocks from the store" and an absolute coordinate would be to provide a GPS location. As you can see, the local coordinate space needs the store as an anchor or else it wouldn't make much sense.To be quite honest, I had a bit of a long time to find this answer. I suppose if you are good with words then it shouldn't be too much of a struggle. But I did a reverse dictionary lookup and only focused on three syllable words until I arrived at "vicinal" which is related to "vicinity". Eg: The person was just in the vicinity. Anyways, I haven't really seen this word used too much in everyday language, so that's probably why it took a while for me. I have a feeling your teacher meant to write "NAL" instead of "MAL" as one of the tiles. This appears to be the second time s/he mixed up M's with N's (the first time being "MATES" mixed up with "NATES"; see problem 3). Insular is an adjective referring to a person or group of people cut off from the larger world. Think of a small town where it's hard to reach. Islands are of course like this, but we could have an "island" rural small town or some culture in a remote location that is on a continent somewhere. It doesn't necessarily have to be a literal island surrounded by water. Think of the word "insulate" to help remember "insular". Also, the term "insular" could refer to the deliberate attempt to keep oneself (or one group) closed off from the rest of the world. An example of this is the Amish culture being insular to the American culture surrounding them. If object A is larger than object B, then we say A is relatively large  compared to B. This is one example usage of the word "relative".

A railway wagon of mass 100 kg is pulled with a force of 1000 N. what is its Acceleration ?​

Answers

Solution,

Mass(m)= 100kgForce(F)= 1000NAcceleration (a)=?

We know that,

[tex]f = ma \\ \frac{f}{m} = a \\ \frac{1000}{100} = a \\ 10 = a[/tex]

Therefore,

Acceleration produced will be 10m/.

The simplest way to estimate the age of the universe is from.

Answers

Answer: There really aren't many ways to estimate how old the universe is but, astronomers start by looking at the oldest stars in the universe.

Explanation:

Answer:

The big bang 13.7 billion years ago

Explanation:

Everything started 13.7 billion years ago that is when the big bang started.

A curling stone has a mass of 19.1 kg and a velocity of 3.0 m/s. What is the momentum of the curling stone?

Answers

Considering the definition of momentum, the momentum of the curling stone is 57.3 [tex]\frac{kgxm}{s}[/tex].

Definition of linear momentum

The linear momentum or quantity of movement is the magnitude that allows us to measure the capacity of a body in motion to exert a force on another that is in its path.

The linear momentum of a particle of mass m or body m moving with a speed v is defined as the product of the mass times the speed:

P = m×v

Where, as previously stated:

P is the moment.m is the mass of the body.v is the speed.

The standard units for moment are [tex]\frac{kgxm}{s}[/tex], and moment is always a vector quantity. Its direction and direction coincide with those of the velocity vector.

Momentum of the curling stone

In this case, you know:

P= ?m= 19.1 kgv= 3 [tex]\frac{m}{s}[/tex]

Replacing in the definition of momentum:

P = 19.1 kg ×3 [tex]\frac{m}{s}[/tex]

Solving:

P=57.3 [tex]\frac{kgxm}{s}[/tex]

Finally, the momentum of the curling stone is 57.3 [tex]\frac{kgxm}{s}[/tex].

Learn more about momentum:

https://brainly.com/question/25849204

https://brainly.com/question/25121535

Why is it important to oil machine regularly?​

Answers

Because it helps slow down tearing and wearing the car down. If the friction is under control, the less chance of tearing.

To reduce friction between the moving parts of the machine.

When a light wave enters a medium of greater optical density, select two of the characteristics that will decrease in the wave,
A speed
B
frequency
С
wavelength
D
period
E
amplitude
F
height

Answers

Answer:

The speed (A) will decrease

V = F λ  (the frequency F remains the same to maintain continuity across the interface)

Therefore (C) the wavelength must decrease      

Note: n = speed of light in air / speed of light in medium

When a light wave enters a medium of greater optical density the two characteristics that are: (A) Speed, and (C) Wavelength will decrease in the wave.

It is given that a light wave enters a medium of greater optical density.

It is required to find the characteristics that will decrease.

What is light?

It is defined as the type of waves such as sound waves or ocean waves but waves carry energy. Light does not need any medium to travel.

We know that:

[tex]\lambda =\frac{v}{f}[/tex]

Where Lamda (λ) = Wavelength

                        ([tex]v[/tex]) = Speed of wave

                        [tex](f)[/tex] = Frequency of the wave.

The frequency remains the same to maintain continuity across the interface.

thus Speed of wave and Wavelength will decrease.

Learn more about the light here:

https://brainly.com/question/23342892

A beam of light, traveling in air, strikes a plate of
transparent material at angle of incidence of 56 degrees. It is observed that the reflected and refracted beams form an angle
of 90 degrees. What is the index of refraction of this material?

Answers

Explanation:

I hope you benefit from me...

Which of the following regions have extreme scarcity of water chose all that apply. 1. Australia 2. Southwest of the United States 3. Russia 4. East coast of the United States

Answers

Answer:

I would say 1 and 2. I am not sure so Im going with my gut and so should you:) lol

Explanation:

Good morning! Can someone please answer this, ill give you brainliest and you will earn 50 points.

Answers

temperature and energy ↔  surface temperature and ocean temperature

atmospheric composition ↔  carbon dioxide and other greenhouse gases

ocean and water ↔ ocean acidification and sea level

cryosphere ↔  sea ice and glaciers

Answer:

Explanation:

temperature and energy: the only answer that mentions temperature is -

surface temperature and ocean temperature

atmospheric composition: the only answer that mentions air gases is -

carbon dioxide and other greenhouse gases

ocean and water: the only answers that mentions ocean is -

ocean acidification and sea level

cryosphere: cryo means cold and the only answers that mentions anything cold is -

sea ice and glaciers

Tonight in the sky the Moon can be seen next to a very bright star named Aldebaran. How soon will the Moon be seen next to that same star

Answers

Moon will be seen next to that same star in 27.3 days. It is the time required for the Moon to orbit around the Earth.

What time is required for a lunar orbit?

The Moon is a natural satellite that needs approximately 27.3 days to complete a full orbit around the Earth planet.

Moreover, the Earth's planet needs approximately 365 days to reach a full orbit around its star, the Sun.

In consequence, both the Earth planet and its natural satellite (Moon) orbit around the Sun.

Learn more about the Moon here:

https://brainly.com/question/2285325


light reflects from two plane mirrors that meet each other at a right angle.if the incoming ray makes an angle of 20 degrees with the first mirror what is the angle of reflection at the second mirror

Answers

Answer:

angle of reflection is 20

Explanation:

because angle of incidence is equal to angle of reflection

Atoms of which pair of elements will form metallic bonds in a compound?
A. I and F
B. Be and Cl
C. Ag and Ca
D. Na and Br

Answers

that is a silly question: C

Metals¡¡¡¡¡¡¡¡¡¡¡¡¡¡

Atoms of which Ag and Ca will form metallic bonds in a compound. So, the correct option is C.

What is meant by metallic bond ?

Metallic bond is defined as the type of chemical bonds, through which the atoms in metals are held together.

Here,

The metallic bond arises between two atoms, due to the electrostatic force of attraction between the conducting electrons and the metal ions.

The silver metal atoms, Ag are held together in their crystal by means of metallic bond.

The atoms of silver(Ag) and calcium(Ca) will form intermetallic bonds between them, when they are in a compound.

Compounds like Ca₅Ag₃ and Ca₃Ag, etc. can be formed through the intermetallic bonds.

Hence,

Atoms of which Ag and Ca will form metallic bonds in a compound.

To learn more about metallic bond, click:

https://brainly.com/question/29762857

#SPJ5

A plane mirror forms a virtual image. give reasons

Answers

Explanation:

So ,plane mirror forms a virtual image.

A meteoroid changed velocity from 1. 0 km/s to 1. 8 km/s in 0. 03 seconds. What is the acceleration of the meteoroid?.

Answers

Initial velocity=1km/s=uFinal velocity=1.8km/s=vTime=t=0.03s

Acceleration be a

[tex]\\ \rm\Rrightarrow a=\dfrac{v-u}{t}[/tex]

[tex]\\ \rm\Rrightarrow a=\dfrac{1.8-1}{0.03}[/tex]

[tex]\\ \rm\Rrightarrow a=0.8/0.03[/tex]

[tex]\\ \rm\Rrightarrow a=26.67km/s^2[/tex]

Question :-

A Meteoroid changed Velocity from 1.0 km/s to 1.8 km/s in 0.03 sec . What is the Acceleration of the Meteoroid ?

Answer :-

Acceleration of the Meteoroid is 26.72 km/s² .

[tex] \rule {180pt} {2pt} [/tex]

Given :-

Initial Velocity = 1 km/sFinal Velocity = 1.8 km/sTime = 0.03 seconds

To Find :-

Acceleration = ?

Solution :-

As per the provided information in the given question, we have been given that the Initial Velocity of the Meteoroid is 1 km/s . Its Final Velocity is given 1.8 km/s . Time is given as 0.03 seconds . And, we have been asked to calculate the Acceleration of the Meteoroid .

For calculating the Acceleration , we will use the Formula :-

[tex] \bigstar \: \: \boxed{ \: \sf {Acceleration \: = \: \dfrac{ \: v - ᴜ \: }{ᴛ} \: }} \\ [/tex]

Where ,

v denotes to the Final Velocityᴜ denotes to the Initial Velocityᴛ denotes to the Time

Therefore , by Substituting the given values in the above Formula :-

[tex] \longmapsto \: \: \sf{Acceleration \: = \: \dfrac{ \: 1.8 \: - \: 1 \: }{0.03} } [/tex]

[tex] \longmapsto \: \: \sf{Acceleration \: = \: \dfrac { \: \: 0.8 \: \: }{ \: \: 0.03 \: \: } } \\ [/tex]

[tex] \longmapsto \: \: \sf{Acceleration \: = \: 26.72} \\ [/tex]

Hence :-

Acceleration = 26.72 km/s² .

[tex] \underline {\rule {180pt} {4pt}} [/tex]

an unbalanced force of 10 N causes an object to accelerate at 2 m/s. What is the mass of the object? ___kg

Answers

Answer:  mASS OF OBJECT = 5 KG

Explanation: BY USING FORmULA OF UNBALANCE FORCE

                             F = ma

                             10 = m x 2

                             m = 10 / 2

                             m =  5 kg

What happens when light waves strike a mirror?

Most of the light waves are refracted.
Most of the light waves are absorbed.
Most of the light waves are scattered.
Most of the light waves are reflected.

Answers

Answer:

most light waves are scattered or are either reflected

Explanation:

the light waves bounce after hitting the mirror.

Answer:

most light waves are reflected

explanation:

when light hits a mirror it bounces back at the same angle it hit this is called reflection refraction on the other hand Refraction is the bending of light

Image result for what is refraction of light

Refraction is the bending of light

Keesha conducts an experiment by pouring equal amounts of boiling water into four containers. The containers are the same size and shape, but they are made of different materials. The chart lists the containers according to their materials. A 2-column table with 4 rows. The first column labeled Container has entries W, X, Y, Z. The second column labeled Material has entries foam, glass, plastic, stainless steel. Using protective gloves, Keesha carefully touches each container immediately after pouring the water. Which container was likely the hottest? W X Y Z.

Answers

Option Z is correct. The stainless steel container was likely the hottest. Stainless steel is an excellent heat conductor because it quickly warms the substance.

What are the qualities of stainless steel?

Stainless steel is an excellent heat conductor because it quickly warms the substance or allows heat to travel through it. Stainless steel is also corrosion-resistant.

Foam, glass, and plastic, on the other hand, are all poor heat and electrical conductors. As a result, they do not allow heat to travel through.

As a result, we may deduce that, among the available possibilities, the stainless steel container was most likely the hottest.

Hence Option Z is correct. The stainless steel container was likely the hottest.

To learn more about stainless steel refer to the link;

https://brainly.com/question/94280

Less massive molecules tend to escape from an atmosphere more often than more massive ones because
A. they are more buoyant.
B. the gravitational force on them is less.
C. they are smaller and thus experience fewer collisions on their way out.
D. they are moving faster.

Answers

We can confirm that less massive molecules tend to escape from an atmosphere more often than more massive ones because they are moving faster.

How does speed help molecules escape?

This has to do with the energy of the molecules. Speed comes with its higher kinetic energy. This higher level of energy helps the molecules to escape by giving them enough energy to overpower the force of gravity acting upon them in the atmosphere.

Therefore, we can confirm that less massive molecules tend to escape from an atmosphere more often than more massive ones because they are moving faster.

To learn more about molecules visit:

https://brainly.com/question/19922822?referrer=searchResults

A 71 kg hiker climbs to the top of a 4300 m -high mountain. The climb is made in 5. 5 h starting at an elevation of 2800 m. Calculate the work done by the hiker against gravity. Calculate the average power output in watts. Calculate the average power output in horsepower. Calculate assuming the body is 16% efficient, what rate of energy input was required

Answers

Answer:

A. 1.0x10^6 J

B. 53 W

C. 7.1x10^-2

D. 330 W

Explanation:

A) work done = mgh

so 71*9.8*1500=1.0x10^6 J

B) power = Work done/time

So P=1.0x10^6/19800 sec

P= 53 W

C) 1 HP =735 W

503 W= 7.1x10^-2 HP

D) efficiency =(output/ input) *100

so 16= (53/input) *100

input= 7.1x10^-2

Pls help. Very urgent!
To have a substance change phase from a solid to a liquid you must ____

A. increase the thermal energy of the substance
B. increase the temperature to 0 degrees
C. put the object in a fire
D. first shred the aluminum cans and then heat them until they melt

Answers

The Answer is A

I just guessed and I think it's the right answer.

Answer:

C

put the object in fire to make solid to liquid

Im doing the MT. Thielson

1. Title slide

2. status of the glaciers (are they growing or shrinking,
how fast, how many are there in your assigned area)
the impact of those changes on the local water cycle
(think rivers and lakes and be specific - what lakes
and rivers? Include some pictures of the ones that
you talk about)

3. how glaciers have shaped the mountain and the
area around it.

4. Other features of interest (what people do on or
around the mountain/range, what other points of
interest are nearby - describe and include pictures).

5. Bibliography slide - this can be very informal. Just
copy/paste the URLs from the sites where you find
information.

Answers

I can help you.

I can make a slides and send it to you. this is actually very simple. just takes some time. I can do it.

All but one statement below is true. Find the false statement about the Heating Curve. Consider the heating curve of this unknown, substance X. Please alert your teacher if this image is missing. All but one statement below is true. Find the false statement about the Heating Curve. The melting point is 20°C. Throughout the heating curve (A --> E), kinetic energy is increasing. At point C, substance X is in the liquid state. During B and D, the potential energy of substance X is increasing as it undergoes a state change.

Answers

The various points on the heating curve corresponds to melting, boiling and vaporization.

Heating curve

A heating curve is a plot of temperature against  time. The heating curve reveals how the temperature of the body changes with time during heating.

The heating curve is not shown here hence the question is incomplete. However, we must note that The various points on the heating curve corresponds to melting, boiling and vaporization.

Learn more about heating curve: https://brainly.com/question/10481356

Answer: I'm not exactly sure, but I would say the answer is

B. Throughout the heating curve (A --> E), kinetic energy is increasing.

Explanation: Throughout the entire heating curve diagram, it is not ALWAYS the kinetic energy increasing because Points B and D shows the potential energy increasing as it goes through the phase changes.

I'm sorry if it isn't right, but to lower the chances, I know for sure that the incorrect answers are C and D.

One of the fastest elevators in the world is found in the Taipei 101 building. It ascends at 16. 83 m/s and rises 382. 2 m. Each elevator has a maximum load capacity of 1600 kg. What power is required to raise a load of 1160 kg from the lowest level to the top floor?

Answers

This question involves the concepts of potential energy, power, and time.

The power required to raise the load from the lowest level to the top floor is "264.16 KW".

Power

The power required by the lift can be calculated by the following formula:

[tex]P = \frac{P.E}{t}[/tex]

where,

P = power = ?P.E = Potential Energy = mghm = mass load capacity = 1600 kgg = acceleration due to gravity = 9.81 m/s²h = height achieved = 382.2 mt = time = [tex]\frac{h}{v}[/tex]v = speed = 16.83 m/s

Therefore,

[tex]P=\frac{mgh}{\frac{h}{v}}\\\\P = mvg = (1600\ kg)(16.83\ m/s)(9.81\ m/s^2)[/tex]

P = 264163.68 = 264.16 KW

Learn more about potential energy here:

https://brainly.com/question/21288807

What has more KE a 2 kg mass at 10 m/s or a 20 kg mass at 3 m/s?

Answers

KE = 1/2mv^2
for 2 kg mass:
KE = 1/2*2*10^2
= 100 J
for 3kg mass:
KE = 1/2*3*20^2
= 600 J
3kg object has more KE

can someone please answer this, ill give you brainliest and your getting 100 points.

Answers

Answer:

D

Explanation:

I have no explanation but  it should be right just like the core of earth

Answer:

Asthenosphere

Explanation:

B is the correct option

C and D are part of earth's coreD denotes to inner coreC denotes to inner core

what is the force constant of spring which is streched
a.2mm by a force of 4N
b.4cm by a mass of 200g
c.2cm by a mass of 1kg​

Answers

Explanation:

a. F=kx

4=k (2×10^-3)

k= 2000 N/m

b. mg=kx

0.2 ×10 = k (4×10^-2)

2/(4×10^-2) =k

k=50 N/m

c. mg=kx

1×10 = k (2×10^-2)

½ × 10² =k

k=50N/m

good morning to you all! can someone please answer this, ill give you brainliest and your earning 50 points.

Answers

Despite the risks, Human populations can be found near volcanoes. This can be associated with the availability of which natural resource?

Geothermal energy

Geothermal energy is the form of energy obtained from the heat of the earth. Near volcanoes the land is more hot compared to the normal areas. So, the heat of the lava will help in producing Geothermal energy...~

Answer:

Geothermal energy

Explanation:

The volcanoes erupt the hot magma or lava This is the main source of geothermal energy.As energy is most important thing for survival so many humans establish community near volcanoes

Two objects are being lifted by a machine. One object has a mass of 4 kg, and is lifted at a speed of 5 m/s. The other has a mass of 8 kg and is lifted at a rate of 7 m/s. Which object had more potential energy when it was lifted a distance of 10 m? What does this tell you about the variable(s) that impact gravitational potential energy?

Answers

Answer:

The object that weighs 8kg.

(sorry if it's wrong)

Explanation:

The heavier an object is the more potential energy it has.

Which element is MOST LIKELY to be dull?
carbon
aluminum
mercury
sodium

Answers

as a blade? murcury because it stays liquid at room temp. it would be a puddle with a hanfle which is like... really dull

You hold a pen up in the air and then let go of it. The pen's inertia is its tendency to
- maintain a constant speed
why is this

Answers

Explanation:

The gravity gives the pen a constant force pointing to the center of the earth. And because of Newton's Second law: The acceleration of an object is directly proportional to the force it receives, inversely proportional to its mass, and the direction of acceleration is the same as the direction of the force.

So the pen has a tendency to going straight down on the ground. I don't think it maintain a constant speed but a constant acceleration. And the rate of the acceleration is approximate 9. 8m/s^2.

And as for its inertia, Newton's original statement in Principia mathematica was that any body should remain in uniform motion in a straight line or at rest until an external force forces it to change its motion. Bodies are too lazy to move if you don't force them. The moment you let go of the pen, the initial speed is zero. And it gains a acceleration of 9. 8m/s^2

According Newton's law of inertia, the pen tends to continue in its state of motion or rest. Hence, the pen tends to move in a constant velocity.

What is inertia ?

Newton's first law of motion states that, every objects tends to continue on the state of motion or rest until an external force acts on it. This tendency of objects is called inertia.

We can experience inertia in many situations. A very common example is ,when a stationary bus move backward when it started quickly that it tends to stay on rest. Similarly we will move forward when the bus suddenly breaks.

The similar effect is encountered in the pen here. When it moves through the air, except the air resistance no other force to resist its motion and it tends to move in a constant speed.

Find more on inertia:

https://brainly.com/question/3268780

#SPJ2

Other Questions
please show work5x+20=3x+4 7x-4=3x+82x+6=x-9 good evening! Can someone please answer this, ill give you brainliest and your earning 50 points. Would be very appreciated. What is the acceleration ofa 6 kg object being pulledwith a force of 12 N? HURYY PLEASE I NEED HELP Which inequality does this graph show? A. 4y 5x < 1 B. 5y 4x < 1 C. 4y 4x < 1 D. 4x 4y < 1 Planning if and when you have children is part of planning your life? Find the value of x. 3) 2x (x + 21) Rectangle JKLM undergoes a sequence of transformations, resulting in rectangle JKLM. The length of side KL is 6 units. The coordinates of vertex K are (-3, 2), and the coordinates of vertex M are (3, -2). Describe a sequence of transformations to rectangle JKLM that would result in rectangle JKLM. Question 15 of 20In which situation would a writer most likely use informal language?A. Writing an essay for a college entrance applicationB. Writing a letter to a supervisor requesting a letter ofrecommendationC. Writing a letter of interest for a job applicationD. Writing a letter to a friend who is stationed in the military overseas What factors do NOT affect friction between two objects? Explain how you know this. Identify the elements that God meant to be free and how they are distributed to the inhabitants of the tenements? please answer the question in the link provided and show all the working Should we change how social media is regulated? A new anxiety medication has been manufactured and a study is being conducted to determine whether its effectiveness depends on dose. When 40 milligrams of the medication was administered to a simple random sample (SRS) of 60 patients, 21 of them demonstrated lower stress levels. When 75 milligrams of the medication was administrated to another SRS of 85 patients, 34 of them demonstrated lower stress levels. Which of the following test statistics is an appropriate hypothesis test? Help with this pls pls plsss? Helpppp helpppp plsssssA volume v =40ml of distilled water is added to volume vi =10ml of sugar_water solution of concentration ci=0.3mol.L-1 1) calculate the concentration cf of obtained solution 2) deduce the number or factor of dilution? (GIVING BRAINLYIST) How does temperature and precipitation change as you increase in elevation? Temperature gets warmer and precipitation increases. Temperature gets cooler and precipitation increases. Temperature gets warmer and precipitation decreases. Temperature gets cooler and precipitation decreases. A student on the basketball team makes 72% of her free-throw attempts. Out of 450 attempts, how many free throws will this student make? What kind of physical touch would absolutely destroy you right now?. Vr1 = _______voltsO 30.O 160.O 24.O 6.0 simplify this expression 4x^2 y^3 2x^3 y^4