Answer:
laboratory preparation off Hydrogen: Hydrogen is prepared in the laboratory by the action of the dilute hydrochloric acid or dilute sulphuric acid on granulated zinc. Use of Granulated Zinc Granulated zinc contains an impurity like copper which acts as a positive catalyyst.
Explanation:
Hope this helps!
Unsaturated, saturated, or supersaturated?
Answer:
supersaturated
Explanation:
What other small steps can we take to save water ?
Answer:
Check your toilet for leaks. ...
Stop using your toilet as an ashtray or wastebasket. ...
Put a plastic bottle in your toilet tank. ...
Take shorter showers. ...
Install water-saving shower heads or flow restrictors. ...
Take baths. ...
Turn off the water while brushing your teeth. ...
Turn off the water while shaving.
Explanation:
Answer:
keeping the water clean
Explanation:
avoid dumping rubish in the water
Calculate the pH of the solution, given the following (H+). Then identify the
solution as acidic, basic, or neutral. [H+]=7.94x10^-5 *
4.1; basic
0 6.9; basic
04.1; acidic
Answer: 4.1 Acidic
Explanation:
pH = -log(H+)
= -log (7.94x10^-5)
= 4.10017949757
= 4.1
any pH under 7 is acidic
2KCIO.
2KOI
30,
2
How many moles of potassium Chlorate are needed to produce 15.0 moles of oxygen
Answer:
10 moles of potassium Chlorate are required to produce 15 mole of oxygen
Explanation:
The balanced chemical equation is
2KClO3(s)→2KCl(s)+3O2(g)
2 moles of potassium Chlorate produce 3 moles of oxygen
Number of moles of potassium Chlorate required to produce 1 mole of oxygen [tex]= \frac{2}{3}[/tex]
Number of moles of potassium Chlorate required to produce 15 mole of oxygen
[tex]= \frac{2}{3} * 15\\= 10[/tex]
10 moles of potassium Chlorate are required to produce 15 mole of oxygen
A functional group is a specific arrangement of atoms in an organic compound that is capable of characteristic reactions
Is this true of false
PLEASE HELPP ASAP I Would appreciate it
Answer:
True
Explanation:
What pressure, in atm, would be equal to 798 mmHg?
Answer:
1.05 atm
It should be 1 atm = 760 mm; therefore, 798 mm x (1 atm/760) = about 1.05 atm.
The value of pressure in atm that would be equal to 798 mmHg is 1.05 atmospheric.
What is pressure?Pressure is a physical quantity or a kind of force which is perpendicularly applied on the surface area of any object so that force is equally distributed on that surface.
Pressure will be maesured by various unit and have relation with one another.
As we know that, 1 atm = 760 mmHg
Or 1 mmHg = 1/760atm
Given quantity of pressure is 798 mmHg and we calculate this quantity by multiply this value by 1/760 and we get,
798 mmHg = 798mmHg × 1/760atm/mmHg = 1.05 atm
Hence required value of pressure is 1.05 atm.
To know more about pressure units, visit the below link:
https://brainly.com/question/17386864
1. What is the function of the circulatory system? * 10 points A. Provide blood with oxygen from the air, & to get rid of carbon dioxide B. Carry oxygen, nutrients, waste, & to fight pathogens C. Secrete hormones to regulate the body and maintain homeostasis D. Produce red blood cells, white blood cells, & platelets
Answer:
B. Carry oxygen, nutrients, waste, & to fight pathogens
Explanation:
The circulatory system refers to all organs and tissues involved in carrying blood and lymph around the body.
The circulatory system carries oxygenated blood from the heart to cells and deoxygenated blood back to the heart.
Nutrients are carried in the blood to cells in different parts of the body and waste products are also carried from cells in the blood.
White blood cells is a component of blood in the circulatory system that fights off diseases.
9. Which of these things is true about the Moon?
A
The Moon is always moving around Earth in a circle.
B
The Moon is always in the same position in Earth's sky.
С
The Moon is always moving in many changing patterns around Earth.
D
The Moon is always moving back and forth across Earth's sky.
The true statement about the Moon is: A. The Moon is always moving around Earth in a circle.
What is a Moon?A Moon can be defined as the natural satellite of planet Earth that shines due to the Sun's reflected light, as it revolves around the Earth from west to east in 29½ days.
The phases of the Moon.Generally, there are four (4) primary Moon phases and these are:
New MoonFirst QuarterFull MoonThird Quarter (Last Quarter)In conclusion, the true statement about the Moon is that it is always moving around Earth in a circle.
Read more on the Earth here: brainly.com/question/1286910
A functional group is a specific arrangement of atoms in an organic compound that is acmpavle if characteristic reactions
Is this True or false
Does not having the word (chemical )before reactions make it false
Please help i would appreciate it
Explanation:
(a) a functional group is a special group of atoms or bonds in a compound that is responsible for the chemical reactions, behavior, and characteristics of that compound. (b) Functional group is present in both the compound is alcohol (-OH).
Functional groups are specific groupings of atoms within molecules that have their own characteristic properties, regardless of the other atoms present in a molecule. Common examples are alcohols, amines, carboxylic acids, ketones, and ethers.
Key Points
Functional groups are often used to “functionalize” a compound, affording it different physical and chemical properties than it would have in its original form.
Functional groups will undergo the same type of reactions regardless of the compound of which they are a part; however, the presence of certain functional groups within close proximity can limit reactivity.
Functional groups can be used to distinguish similar compounds from each other.
Key Terms
functional group: A specific grouping of elements that is characteristic of a class of compounds, and determines some properties and reactions of that class.
functionalization: Addition of specific functional groups to afford the compound new, desirable properties.
I didn’t study for this lol if your answer correct I’ll mark ur answer brainliest
Answer:
3
Explanation:
3 is the answer is did this a little while ago
How many liters of water do we need to add to 5.00 moles to get a 0.648 M solution?
Answer: This is a typical acid/base equilibrium problem, that involves the use of logarithms.
Explanation:We assume that both nitric acid and hydrochloric acid dissociate to give stoichiometric
H
3
O
+
.
Moles of nitric acid:
26.0
×
10
−
3
⋅
L
×
8.00
⋅
m
o
l
⋅
L
−
1
=
0.208
⋅
m
o
l
H
N
O
3
(
a
q
)
.
And, moles of hydrochloric acid:
88.0
×
10
−
3
⋅
L
×
5.00
⋅
m
o
l
⋅
L
−
1
=
0.440
⋅
m
o
l
H
C
l
(
a
q
)
.
This molar quantity is diluted to
1.00
L
. Concentration in moles/Litre =
(
0.208
+
0.440
)
⋅
m
o
l
1
L
=
0.648
⋅
m
o
l
⋅
L
−
1
.
Now we know that water undergoes autoprotolysis:
H
2
O
(
l
)
⇌
H
+
+
O
H
−
. This is another equilibrium reaction, and the ion product
[
H
+
]
[
O
H
−
]
=
K
w
. This constant,
K
w
=
10
−
14
at
298
K
.
So
[
H
+
]
=
0.648
⋅
m
o
l
⋅
L
−
1
;
[
O
H
−
]
=
K
w
[
H
+
]
=
10
−
14
0.648
=
?
?
p
H
=
−
log
10
[
H
+
]
=
−
log
10
(
0.648
)
=
?
?
Alternatively, we know further that
p
H
+
p
O
H
=
14
. Once you have
p
H
,
p
O
H
is easy to find. Take the antilogarithm of this to get
[
O
H
−
]
.
Answer link
it takes 125.0ml of 3.5M hydrobromic acid to neutralize 75.0ml of lithium hydroxide. what is the concentration of lithium hydroxide
Answer:
5.83 M
Explanation:
3.5 M * 125.0 ml = M₂ * 75.0ml
437.5 M.ml = M₂ * 75.0 ml
M₂ = 437.5 M.ml / 75.0 ml
M₂ = 5.83 M
Need help on this question asap pleasee
No links
Answer:
Endothermic
Explanation:
An endothermic reaction is one in which energy is absorbed while an exothermic reaction is one in which energy is given out(evolved).
If we look at the reaction as written; 3C(graphite) + 3H2(g) + 88kcal -------> C3H8(g), we will notice that;
i) 88kcal of energy had to be absorbed for the reaction to occur
ii) The enthalpy change for the reaction is positive.
Since energy must be taken in to drive the forward reaction, then the reaction is endothermic as written.
science helpppppppppppppppppppppppppppppppp
Answer: it should be 80g
Explanation:
Please help me with this chem question. Only answer if you know it.
Answer:
solid=(s)
Explanation:
A solubility table may be something your class may want you to memorize. Where an aqueous (aq) solution is formed by a soluble compound dissolving in water, our solvent. So if we refer to this solubility table, it says phosphate (PO4) is usually insoluble, so in the reaction it won't break down in water and will stay as a solid (s). The only exceptions are group 1 alkali metals or ammonium (NH4+).
.The ___________ is the muscular organ that pumps blood through the circulatory system by rhythmic contractions and relaxation
heart
lungs
kidneys
liver
Help!!!
How many grams of HCL are needed to make 500.0 mL of a 0.100 M solution?
Answer:
1.44 g
Explanation:
The problem gives you the molarity and volume of the target solution, so right from the start you know that you can use that information to determine the number of moles of hydrochloric acid that it must contain.
So, molarity measures a solution's concentration in terms of how many moles of solute, which in your case is hydrochloric acid, you get per liter of solution.
A
0.158 M
hydrochloric acid solution contains
0.158
moles of hydrochloric acid for very liter of solution. Since you're dealing with
250 mL
, the equivalent of
1
4
th
of a liter, your solution will contain
250
mL
⋅
1
L
10
3
mL
⋅
0.158 moles HCl
1
L
=
0.0395 moles HCl
Now that you know how many moles of hydrochloric acid are needed to prepare your solution, use the compound's molar mass to convert this to grams
0.0395
moles HCl
⋅
36.46 g
1
mole HCl
=
∣
∣
∣
∣
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
a
a
1.44 g
a
a
∣
∣
−−−−−−−−−−
Explanation:
Please brainliest.
What’s an easy way to learn to convert metric numbers? Help plz
Explanation:
HOPE IT HELPS
THANKS
How many grams are in 4.00 moles of Cr2O3?
Answer:
607.9616 grams
Explanation:
Hope this helped!!
Use the masses of the elements below to calculate the mass of 8.70 moles of H3M (the number at the bottom of
each square is the atomic mass of that element)
1
2
3
4
5
6
A
H
C
B
M
Sm
aragon
hillsdale
capuchino
mills
burlingame
san mateo
1.10
3.50
7.09
11.22
15.23
18.98
Given:
Wanted
Relationship: 1 mole H3M =
grams
Final answer
grams
yes use the masses of an element below calculate the mass of it 8.70 mole of each 3M
calculate the PH of a solution 0.030 M HCl
Answer:
pH = 1.522
Explanation:
HCl + H20 -> Cl^(-) + H30^(+)
0.03M ____ ____
____ 0.03M 0.03M
[H30^(+)] = 0.03M
pH = - log([H30^(+)])
pH = - log( 0.03)
pH = 2 - log3
pH = 2- 0.47
pH = 1.522
The pH of the hydrogen chloride, HCl solution having a concentration of 0.03 M is 1.52
What is pH ?This is simply a measure of the acidity / alkalinity of a solution.
The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration
How to determine the concentration of H⁺Dissociation equation
HCl(aq) —> H⁺(aq) + Cl¯(aq)
From the balanced equation above,
1 mole of HCl contains 1 mole of H⁺.
Therefore,
0.03 M HCl will also contain 0.03 M H⁺
How to determine the pH Hydrogen ion concentration [H⁺] = 0.03 MpH =?pH = –Log H⁺
pH = –Log 0.03
pH = 1.52
Learn more about pH:
https://brainly.com/question/3709867
How long does cream of tartar activate
__Co + __F2 --> __CoF3
Answer:
2Co + 3F2 --> 2CoF3
Explanation:
When balancing an equation we need to ensure that the products used equal the reactants produced. Hence to balance the equation we need 3 F2 molecules so we have 6F atoms in total. and since 1 Co molecule bonds to 3 F molecules. We are gonna need to 2 Co molecules.
At the same temperature and pressure, 15L of CO2 gas has the same amount of molecules as what volume of N2 gas?
Answer: 15 L of [tex]N_2[/tex] gas will have same numer of molecules as 15L of [tex]CO_2[/tex] gas at the same temperature and pressure,
Explanation:
According to avogadro's law, equal moles of gases occupy equal volume at same conditions of temperature and pressure.
[tex]\text{Number of moles}=\frac{\text{Given volume}}{\text{Molar volume}}[/tex]
[tex]\text{Number of moles of} CO_2=\frac{15L}{22.4L/mol}=0.67mol[/tex]
[tex]1 mole of CO_2[/tex] contains=[tex]6.022\times 10^{23}[/tex] molecules of [tex]CO_2[/tex]
Thus 0.67 moles of [tex]CO_2[/tex] contains=[tex]\frac{6.022\times 10^{23}}{1}\times 0.67=4.03\times 10^{23}[/tex] molecules
Now molecules of [tex]N_2[/tex] = molecules of [tex]CO_2[/tex] = [tex]4.03\times 10^{23}[/tex]
[tex]6.023\times 10^{23}[/tex] molecules of [tex]N_2[/tex] = 22.4 L
Now [tex]4.03\times 10^{23}[/tex] molecules of [tex]N_2[/tex] = [tex]\frac{22.4}{6.023\times 10^{23}}\times 4.03\times 10^{23}=15L[/tex]
Which index fossil is most likely to be found in
the Allegheny Plateau?
Answer:
amphibians
Explanation:
please mark this answer as brainliest
Use the scenario to answer the following question.
A group of students working in a chemistry lab is planning a procedure to neutralize 25.0mL of 2.0 M hydrochloric acid (strong acid) with 1.0 M potassium hydroxide (strong base). In their procedure they plan on adding an equal volume of the base to the acid.
What would be the expected outcome of carrying out this step as planned?
A.
The resulting pH will be equal to 7 because a strong base will neutralize a strong acid.
B.
The resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
C.
The resulting pH will be greater than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
D.
The resulting pH will not be able to be determined because the concentrations of the acid and base are not the same.
The expected outcome of carrying out this step as planned is :
B. The resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
Acid and basesThe expected outcome of carrying out this step as planned is the resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
pH may be a degree of how acidic/basic water is.
The run goes from - 14, with 7 being unbiased. pHs of less than 7 demonstrate causticity, while a pH of more noteworthy than 7 demonstrates a base.
pH is truly a degree of the relative amount of free hydrogen and hydroxyl particles within the water
Thus, the correct answer is B.
Learn more about "Acids":
https://brainly.com/question/6872943?referrer=searchResults
how many mol are there if there are 3 mol of KNO3?
Answer:
The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles KNO3, or 101.1032 grams.
Balance the following reactions:
1. PbO2 → PbO + O2
Explanation:
2 moles of lead oxide ->
2PbO2 -> 2PbO + O2
The concentration of C6H12O6 may be represented as (C6H12O6) {C6H12O6} [C6H12O6]
Answer:
[tex][C_6H_{12}O_6][/tex]
Explanation:
Hello there!
In this case, since the concept of solution concentration is majorly used in terms of moles per liters of solution or molarity (M), it is also possible to represent this chemical unit by using squared brackets, [ ].
In such a way, when focused on the concentration of glucose, C6H12O6, we can use:
[tex][C_6H_{12}O_6][/tex]
Best regards!
25 g of 116oC steam are bubbled into 0.2384 kg of water at 8oC. Find the final temperature of the system.
Answer: The final temperature of the system will be [tex]13.14^0C[/tex]
Explanation:
[tex]heat_{absorbed}=heat_{released}[/tex]
As we know that,
[tex]Q=m\times c\times \Delta T=m\times c\times (T_{final}-T_{initial})[/tex]
[tex]m_1\times c_1\times (T_{final}-T_1)=-[m_2\times c_2\times (T_{final}-T_2)][/tex] .................(1)
where,
q = heat absorbed or released
[tex]m_1[/tex] = mass of steam = 25 g
[tex]m_2[/tex] = mass of water = 0.2384 kg = 238.4 g (1kg=1000g)
[tex]T_{final}[/tex] = final temperature = ?
[tex]T_1[/tex] = temperature of steam = [tex]116^oC[/tex]
[tex]T_2[/tex] = temperature of water = [tex]8^oC[/tex]
[tex]c_1[/tex] = specific heat of steam = [tex]1.996J/g^0C[/tex]
[tex]c_2[/tex] = specific heat of water= [tex]4.184J/g^0C[/tex]
Now put all the given values in equation (1), we get
[tex]25g\times 1.996J/g^0C\times (T_{final}-116)=-[238.4g\times 4.184J/g^0C\times (T_{final}-8)][/tex]
[tex]T_{final}=13.14^0C[/tex]
Therefore, the final temperature of the system will be [tex]13.14^0C[/tex]