The coordinate matrix of x in the basis B' is: [tex][1.4], [-0.6], [1.4], [d][/tex].
To find the coordinate matrix of a vector x in the basis B', we need to express x as a linear combination of the basis vectors and record the coefficients.
Let's represent the given basis vectors as columns of a matrix B':
B' = [(1, -1, 2, 1), (1, 1, -4, 3), (1, 2, 0, 3), (1, 2, -2, 0)]
Now, suppose the vector x can be written as a linear combination of the basis vectors:
x = a * (1, -1, 2, 1) + b * (1, 1, -4, 3) + c * (1, 2, 0, 3) + d * (1, 2, -2, 0)
To find the coefficients a, b, c, and d, we can solve the following system of equations:
a + b + c + d = x₁
-a + b + 2c + 2d = x₂
2a - 4b + 0c - 2d = x₃
a + 3b + 3c + 0d = x₄
To solve this system of equations, we can form an augmented matrix [B' | x], perform row operations, and bring it to row-echelon form. The resulting augmented matrix will have the coefficients a, b, c, and d in the rightmost column.
The augmented matrix is as follows:
By performing row operations, we can bring this augmented matrix to row-echelon form.
After applying row operations, we obtain the row-echelon form as follows:
[tex][1 0 0 1.4 | a][0 1 0 -0.6 | b][0 0 1 1.4 | c][0 0 0 0 | d][/tex]
From this row-echelon form, we can see that a = 1.4, b = -0.6, c = 1.4, and d can be any real number (since it corresponds to a row of zeros). Therefore, the coordinate matrix of x in the basis B' is:
[tex][x1], [x2], [x3], [x4]= [1.4], [-0.6], [1.4], [d][/tex]
To know more about coordinate matrix,
https://brainly.com/question/32542078
#SPJ11
There are three naturally occurring isotopes of magnesium. Their masses and percent natural abundancesare 23.985042 u, 78.99%; 24.985837 u, 10.00%; and 25.982593 u, 11.01%. Calculate the weighted- averageatomic mass of magnesium?
There are three naturally occurring isotopes of magnesium. Their masses and percent natural abundancesare 23.985042 u, 78.99%; 24.985837 u, 10.00%; and 25.982593 u, 11.01%. Then the weighted- average atomic mass of magnesium is 24.305 u.
Given the following data, we can find the weighted-average atomic mass of Magnesium. The three naturally occurring isotopes of Magnesium are 23.985042 u, 78.99%; 24.985837 u, 10.00%; and 25.982593 u, 11.01%.
Weighted-average atomic mass of magnesium (Mg):
We know that:
Weighted-average atomic mass of magnesium (Mg)
= (Mass of isotope 1 × % abundance of isotope 1) + (Mass of isotope 2 × % abundance of isotope 2) + (Mass of isotope 3 × % abundance of isotope 3) / 100
Whereas,
Mass of isotope 1 (A) = 23.985042 u
% abundance of isotope 1 (a) = 78.99%
Mass of isotope 2 (B) = 24.985837 u
% abundance of isotope 2 (b) = 10.00%
Mass of isotope 3 (C) = 25.982593 u
% abundance of isotope 3 (c) = 11.01%
Putting the values in the above formula,
Weighted-average atomic mass of magnesium (Mg)
= [(23.985042 u × 78.99%) + (24.985837 u × 10.00%) + (25.982593 u × 11.01%)] / 100
= 24.305 u
The weighted-average atomic mass of Magnesium is 24.305 u.
To learn more about weighted average: https://brainly.com/question/18554478
#SPJ11
An insurance company has placed its insured costumers into two categories, 35% high-risk, 65% low-risk. The probability of a high-risk customer filing a claim is 0.6, while the probability of a low-risk customer filing a claim is 0.3. A randomly chosen customer has filed a claim. What is the probability that the customer is high-risk.
It is 48.7% chance that the customer is high-risk given that they have filed a claim.
Let H be the event that a customer is high-risk,
L be the event that a customer is low-risk, and
C be the event that a customer has filed a claim.
The law of total probability states that:
P(C) = P(C|H)P(H) + P(C|L)P(L)
We know:
P(H) = 0.35 and P(L) = 0.65
We also know:
P(C|H) = 0.6 and P(C|L) = 0.3
We are trying to find P(H|C), the probability that a customer is high-risk given that they have filed a claim.
We can use Bayes' theorem to find this probability:
P(H|C) = (P(C|H)P(H)) / P(C)
Substituting in the values we know:
P(H|C) = (0.6 * 0.35) / P(C)
Since we are given that a customer has filed a claim, we can find P(C) using the law of total probability:
P(C) = P(C|H)P(H) + P(C|L)P(L)
P(C) = (0.6 * 0.35) + (0.3 * 0.65)
P(C) = 0.435
Therefore:
P(H|C) = (0.6 * 0.35) / 0.435P(H|C)
= 0.487
It is therefore 48.7% (approx) chance that the customer is high-risk given that they have filed a claim.
Know more about the law of total probability
https://brainly.com/question/30762987
#SPJ11
6. Express the ellipse in a normal form x² + 4x + 4 + 4y² = 4.
Note that the center of the ellipse is (-1/2, 0). The semi-major axis is 2. The semi-minor axis is 2.
How is this so?The equation of an ellipse in standard form is
[tex](x - h)^2 / a^2 + (y - k)^2 / b^2 = 1[/tex]
where
(h, k)is the center of the ellipse, a is the semi-major axis, and b is the semi-minor axis.Completing the square we have
( x² + 4x + 4) + 4y² =4 + 4
4 (x² + x + 1)+ 4y² = 8
4(x² + x + 1/4) + 4y² = 8 + 4 - 4
4(x + 1/2)² + 4y² = 8
Thus, in normal form, we have
(x +1/2)² / 2² + 4y² = 2
Thus, the center of the ellipse is ( -1/2,0). The semi-major axis is 2. The semi-minor axis is 2.
Learn more about Elipse:
https://brainly.com/question/16904744
#SPJ4
An oil spill is modeled as an expanding circle whose radius is r(t) miles where t is the number of hours from the time the spill began. The radius grows at a rate r' (t) = 10 / 2t+1 After 5 hours, what is the area of the oil spill? Sol: 25m (In 11))2 452 square miles
The area of the oil spill after 5 hours is approximately 452.389 square miles. To find the area of the oil spill after 5 hours, we first need to find the radius of the spill at that time.
Given that the rate of growth of the radius is given by r'(t) = 10 / (2t + 1), we can integrate this expression to find the radius function r(t). ∫ r'(t) dt = ∫ (10 / (2t + 1)) dt. Integrating with respect to t gives: r(t) = 10 ln(2t + 1) + C
Since we are given that the spill began at t = 0, we can find the value of C by substituting the initial condition r(0) = 0. This gives: 0 = 10 ln(2(0) + 1) + C, 0 = 10 ln(1) + C, 0 = 10(0) + C, C = 0. Therefore, the radius function is:
r(t) = 10 ln(2t + 1). Now, we can find the area of the spill after 5 hours by using the formula for the area of a circle: A(t) = π * r(t)^2
Substituting t = 5 into the radius function: r(5) = 10 ln(2(5) + 1), r(5) = 10 ln(11). And plugging this into the area formula: A(5) = π * (10 ln(11))^2
A(5) = π * 100 ln^2(11), A(5) ≈ 452.389 square miles. Therefore, the area of the oil spill after 5 hours is approximately 452.389 square miles.
To learn more about area of a circle, click here: brainly.com/question/12414551
#SPJ11
Problem 5 [Logarithmic Equations] Use the definition of the logarithmic function to find x. (a) log1024 2 = x (b) log, 16-4 MAT123 Spring 2022 HW 6, Due by May 30 (Monday), 10:00 PM (KST)
The logarithmic function log1024 2 = x can be rewritten as [tex]2^x[/tex] = 1024. To find the value of x, we need to determine what power of 2 equals 1024. We know that [tex]2^10[/tex] = 1024, so x = 10.
The given equation is log1024 2 = x. This equation represents the logarithmic function, where the base is 1024, the result is 2, and the unknown value is x. To find the value of x, we need to rearrange the equation to isolate x on one side.
In this case, we can rewrite the equation as [tex]2^x[/tex] = 1024. By doing this, we transform the logarithmic equation into an exponential equation. The base of the exponential equation is 2, and the result is 1024. Our objective is to determine the value of x, which represents the power to which we raise 2 to obtain 1024.
To solve this exponential equation, we need to find the power to which 2 must be raised to equal 1024. By examining the powers of 2, we find that [tex]2^10[/tex] equals 1024. Therefore, we can conclude that x = 10.
In summary, the value of x in the equation log1024 2 = x is 10. This means that if we raise 2 to the power of 10, we will obtain 1024. The process of finding x involved transforming the logarithmic equation into an exponential equation and determining the appropriate power of 2. By understanding the relationship between logarithms and exponents, we were able to solve the equation effectively.
Learn more about Logarithmic functions
brainly.com/question/30339782
#SPJ11
Homework Part 1 of 5 O Points: 0 of 1 Save The number of successes and the sample size for a simple random sample from a population are given below. **4, n=200, Hy: p=0.01, H. p>0.01,a=0.05 a. Determine the sample proportion b. Decide whether using the one proportion 2-test is appropriate c. If appropriate, use the one-proportion 2-test to perform the specified hypothesis test Click here to view a table of areas under the standard normal.curve for negative values of Click here to view a table of areas under the standard normal curve for positive values of a. The sample proportion is (Type an integer or a decimal. Do not round.)
The sample proportion is 0.02. The one-proportion 2-test is appropriate for performing the hypothesis test.
The sample proportion can be determined by dividing the number of successes (4) by the sample size (200). In this case, 4/200 equals 0.02, which represents the proportion of successes in the sample.
To determine whether the one-proportion 2-test is appropriate, we need to check if the conditions for its use are satisfied.
The conditions for using this test are: the sample should be a simple random sample, the number of successes and failures in the sample should be at least 10, and the sample size should be large enough for the sampling distribution of the sample proportion to be approximately normal.
In this scenario, the sample is stated to be a simple random sample. Although the number of successes is less than 10, it is still possible to proceed with the test since the sample size is large (n = 200).
With a sample size of 200, we can assume that the sampling distribution of the sample proportion is approximately normal.
Therefore, the one-proportion 2-test is appropriate for performing the hypothesis test in this case.
Learn more about sample proportion
brainly.com/question/11461187
#SPJ11
Convert the point from cylindrical coordinates to spherical coordinates.
(-4, 4/3, 4)
(rho,θ,φ) =
The point in spherical coordinates is now presented: (r, α, γ) = (4.216, - 18.434°, 46.506°)
How to convert cylindrical coordinates into spherical coordinates
In this problem we find the definition of a point in cylindrical coordinates, whose equivalent form is spherical coordinates must be found. We present the following definition:
(ρ · cos θ, ρ · sin θ, z) → (r, α, γ)
Where:
r = √(ρ² + z²)
γ = tan⁻¹ (ρ / z)
α = θ
Now we proceed to determine the spherical coordinates of the point: (ρ · cos θ = - 4, ρ · sin θ = 4 / 3, z = 4)
ρ = √[(- 4)² + (4 / 3)²]
ρ = 4.216
γ = tan⁻¹ (4.216 / 4)
γ = 46.506°
α = tan⁻¹ [- (4 / 3) / 4]
α = tan⁻¹ (- 1 / 3)
α = - 18.434°
(r, α, γ) = (4.216, - 18.434°, 46.506°)
To learn more on spherical coordinates: https://brainly.com/question/4465072
#SPJ4
Find an orthonormal basis for the solution space of the homogeneous system 1 2 1 3 X₂ 0 12 -6 X3
Given system of equations is [tex][\begin{matrix}1x_1 + 2x_2 + 1x_3 &= 0 \\0x_1 + 12x_2 - 6x_3 &= 0\end{matrix}\][/tex]
To find the orthonormal basis of the solution space of the homogeneous system, we will first solve the system, then apply Gram-Schmidt orthogonalization to the resulting solution vectors.
Solving the system of equations:
end{matrix}\]From the second equation, we get:\[6x_3=12x_2\]
Thus,\[x_3=2x_2\]
Putting this value of $x_3$ in the first equation, we get:\[x_1=-3x_2\]
Hence, the solution space of the homogeneous system is: [tex]\[\begin{pmatrix}-3t \\t \\ 2t\end{pmatrix}\] where $t$ is a real number.[/tex]
Now, we will apply the Gram-Schmidt orthogonalization process to find the orthonormal basis of this solution space.
Let $\vec{u_1} = \begin{pmatrix}-3 \\ 1 \\ 2\end{pmatrix}$ and $\vec{u_2}
= \begin{pmatrix}1 \\ 0 \\ 3\end{pmatrix}$ be two vectors of the solution space of the homogeneous system.
We start with normalizing $\vec{u_1}$:\[\begin{aligned}\vec{v_1}
= \frac{\vec{u_1}}{|\vec{u_1}|}\\ &
= \frac{1}{\sqrt{14}}\begin{pmatrix}-3 \\ 1 \\ 2\end{pmatrix}\end{aligned}\]
Now, we subtract the projection of $\vec{u_2}$ onto $\vec{v_1}$ from $\vec{u_2}$
\[\begin{aligned}\vec{v_2} &= \vec{u_2} - \text{proj}_{\vec{v_1}}(\vec{u_2})\\ &
= \begin{pmatrix}1 \\ 0 \\ 3\end{pmatrix} - \frac{\begin{pmatrix}1 \\ 0 \\ 3\end{pmatrix} \cdot \begin{pmatrix}-3/\sqrt{14} \\ 1/\sqrt{14} \\ 2/\sqrt{14}\end{pmatrix}}{\left|\begin{pmatrix}-3/\sqrt{14} \\ 1/\sqrt{14} \\ 2/\sqrt{14}\end{pmatrix}\right|^2}\begin{pmatrix}-3/\sqrt{14} \\ 1/\sqrt{14} \\ 2/\sqrt{14}\end{pmatrix}\\ &
= \begin{pmatrix}1 \\ 0 \\ 3\end{pmatrix} - \frac{3}{14}\begin{pmatrix}-3 \\ 1 \\ 2\end{pmatrix}\\ &
= \begin{pmatrix}85/14 \\ -3/14 \\ 5/7\end{pmatrix}\end{aligned}\]Finally, we normalize $\vec{v_2}$:\[\begin{aligned}\vec{v_2} &
= \frac{\vec{v_2}}{|\vec{v_2}|}\\ &= \frac{1}{\sqrt{850/49}}\begin{pmatrix}85/14 \\ -3/14 \\ 5/7\end{pmatrix}\\ &
= \begin{pmatrix}5/\sqrt{170} \\ -\sqrt{2}/\sqrt{85} \\ \sqrt{10}/\sqrt{17}\end{pmatrix}\end{aligned}\]
Therefore, the orthonormal basis of the solution space of the given homogeneous system is $\boxed{\left\{\begin{pmatrix}-3/\sqrt{14} \\ 1/\sqrt{14} \\ 2/\sqrt{14}\end{pmatrix}, \begin{pmatrix}5/\sqrt{170} \\ -\sqrt{2}/\sqrt{85} \\ \sqrt{10}/\sqrt{17}\end{pmatrix}\right\}}$.
Learn more about equations
brainly.com/question/29657983
#SPJ11
take θ1 = 47.5 ∘if θ2 = 17.1 ∘ , what is the refractive index n of the transparent slab?
The refractive index of the transparent slab is 2.511.
The formula for finding the refractive index is:
n = sin i/sin r
Here,sin i = sin θ1sin r = sin θ2
The angle of incidence is
i = θ1
= 47.5 °
The angle of refraction is
r = θ2
= 17.1 °
Using the above values, the refractive index can be found as:
n = sin i/sin r
= sin (47.5) / sin (17.1)
= 0.7351 / 0.2924
≈ 2.511
To know more about index visit:
https://brainly.com/question/83184
#SPJ11
5. [Section 15.3] (a) Find the volume of the solid bounded by 2 = xy, x² = y, z² = 2y, y² = x, y² = 22 and 20. i.e. Wozy da ay dx dy where D = {(x,y) € R² y ≤ x² ≤ 2y. I ≤ y² < 2x}
To find the volume of the solid bounded by the given surfaces, we need to evaluate the double integral ∬D dz dx dy, where D represents the region bounded by the inequalities y ≤ x² ≤ 2y and I ≤ y² < 2x.
The given region D can be visualized as the area between the parabolic curve y = x² and the curve y = 2x. The bounds for x are determined by y, and the bounds for y are given by the interval [I, 22].
To evaluate the double integral, we integrate with respect to dz, then dx, and finally dy. The limits for integration are as follows: I ≤ y ≤ 22, x² ≤ 2y ≤ y².
Since the problem statement does not provide the exact value for I, it is necessary to have that information in order to perform the calculations and obtain the final volume.
Learn more about double integral here: brainly.com/question/27360126
#SPJ11
2a) 60% of attendees at a job fair had a Bachelor's degree or higher and 55% of attendees were Female. Among the Female attendees, 65% had a Bachelor's degree or higher. What is the probability that a randomly selected attendee is a Female and has a Bachelor's degree or higher? 2b) 60% of attendees at a job fair had a Bachelor's degree or higher and 45% of attendees were Male. 35% of attendees were Males and had Bachelor's degrees or higher. What is the probability that a randomly selected attendee is a Male or has a Bachelor's degree or higher?
a) The probability that a randomly selected attendee is Female and has a Bachelor's degree or higher is 0.3575.
b) The probability that a randomly selected attendee is Male or has a Bachelor's degree or higher is 0.6075.
What is the probability?a) Assuming the following events:
A: The attendee has a Bachelor's degree or higher
F: The attendee is a Female
Data given:
P(A) = 0.60 (60% of attendees have a Bachelor's degree or higher)
P(F) = 0.55 (55% of attendees are Female)
P(A|F) = 0.65 (among Female attendees, 65% have a Bachelor's degree or higher)
The probability that an attendee is Female and has a Bachelor's degree or higher is P(F ∩ A)
Using the formula for conditional probability, we have:
P(F ∩ A) = P(A|F) * P(F)
P(F ∩ A) = 0.65 * 0.55
P(F ∩ A) = 0.3575
b) Assuming the following events:
B: The attendee is a Male
Data given:
P(A) = 0.60 (60% of attendees have a Bachelor's degree or higher)
P(B) = 0.45 (45% of attendees are Male)
P(A|B) = 0.35 (among Male attendees, 35% have a Bachelor's degree or higher)
The probability that an attendee is Male or has a Bachelor's degree or higher is P(M ∪ A).
Using the law of total probability, P(M ∪ A) will be:
P(M ∪ A) = P(M) + P(A|B) * P(B)
P(M ∪ A) = P(B) + P(A|B) * P(B)
P(M ∪ A) = 0.45 + 0.35 * 0.45
P(M ∪ A) = 0.45 + 0.1575
P(M ∪ A) = 0.6075
Learn more about probability at: https://brainly.com/question/23417919
#SPJ4
Find (a) the orthogonal projection of b onto Col A and (b) a least-squares solution of Ax = b.
3
0
1
3
1 - 4
P
0
A =
b=
LO
5
1
0
1
- 1
-4
0
a. The orthogonal projection of b onto Col A is b=
(Simplify your answer.)
b. A least-squares solution of Ax = b is x=
(Simplify your answer.)
The given matrix and vector are:
[tex]\[A = \begin{bmatrix}3 & 0 & 1 \\3 & 1 & -4 \\0 & 5 & 1\end{bmatrix}\][/tex]
and [tex]\[b = \begin{bmatrix}0 \\1 \\-4\end{bmatrix}\][/tex] respectively. a) Orthogonal projection of b onto Col A The orthogonal projection of b onto Col A is given as follows:
[tex]\begin{equation}p A(b) = A(A^T A)^{-1} A\end{equation}[/tex] . Tb In this formula, A.
T is the transpose of matrix A. Let us compute the value of pA(b) as follows:
[tex]\[A^TA = \begin{bmatrix} 3 & 3 & 0 \\\ 0 & 1 & 5 \\\ 1 & -4 & 1 \end{bmatrix}\][/tex]
[tex]\[A^Tb = \begin{bmatrix} -3 \\\ 13 \\\ -19 \end{bmatrix}\][/tex]
[tex]\[p_A(b) = A(A^TA)^{-1}A^Tb\][/tex]
[tex]\[Tb = \frac{1}{35}\begin{bmatrix}7 & -24 & -8 \\\7 & 1 & 20 \\\0 & 28 & -6\end{bmatrix}\begin{bmatrix}-3 \\\13 \\\-19\end{bmatrix}\][/tex]
pA(b) = ( -62/35 223/35 -109/35 )
Therefore, the orthogonal projection of b onto Col A is given as follows: [tex]b = pA(b)[/tex]
[tex]\[p_A(b) = \begin{bmatrix} -\frac{62}{35} \\\ \\\frac{223}{35} \\\ \\-\frac{109}{35} \end{bmatrix}\][/tex]
b) Least-squares solution of Ax = b The least-squares solution of [tex]Ax = b[/tex]is given as follows: [tex]\begin{equation}x = (A^T A)^{-1} A\end{equation}[/tex]. Tb In this formula, A.T is the transpose of matrix A.
Let us compute the value of x as follows:
[tex]\[A^TA = \begin{bmatrix}3 & 3 & 0 \\0 & 1 & 5 \\1 & -4 & 1\end{bmatrix}\][/tex]
[tex]\[\begin{aligned}A^Tb &= \begin{bmatrix} -3 \\ 13 \\ -19 \end{bmatrix} \\\end{aligned}\]\\\\\\x &= (A^TA)^{-1}[/tex]
[tex]\[A^Tb = \frac{1}{35} \begin{bmatrix}7 & -24 & -8 \\7 & 1 & 20 \\0 & 28 & -6\end{bmatrix} \begin{bmatrix}-3 \\13 \\-19\end{bmatrix}\][/tex]
[tex]\[x = \begin{bmatrix}\frac{8}{35} \\\\\frac{12}{35} \\\\\frac{-19}{35}\end{bmatrix}\][/tex]
Therefore, the least-squares solution of Ax = b is given as follows:
[tex]\[x = \begin{bmatrix}\frac{8}{35} \\\\\frac{12}{35} \\\\\frac{-19}{35}\end{bmatrix}\][/tex]
To know more about matrix visit:
https://brainly.com/question/29132693
#SPJ11
Select your answer (2 out of 20) 2x² + Which shape is defined by the equation 25 (y-3)² = 1? 49 O Circle O Ellipse O Parabola Hyperbola None of the above.
Since a is less than b, the ellipse is vertically oriented with the major axis being the vertical axis passing through the center.
How to determine?The shape defined by the equation 25(y - 3)² = 1 is an ellipse.
An ellipse is defined as a curve on a plane where the sum of the distances from any point on the curve to two other fixed points called foci is constant.
The general equation for an ellipse is given by (x-h)²/a² + (y-k)²/b²
= 1
where (h, k) is the center of the ellipse, a and b are the semi-major and semi-minor axes respectively.
In the given equation, the center is at (0, 3) and
a² = 1/25 and
b² = 1,
which means a = 1/5
and b = 1.
Since a is less than b, the ellipse is vertically oriented with the major axis being the vertical axis passing through the center.
To know more on Ellipse visit:
https://brainly.com/question/20393030
#SPJ11
Find the steady-state vector for the transition matrix. 0 1 10 1 ole ole 0 10 0 。 0 X= TO
The steady-state vector can be obtained by substituting the given values into the formula: P = [I−Q∣1]−1[1...,1]T P = [(2/3, 1/3, 0), (1/10, 0, 9/10), (5/9, 4/9, 0)][1/2, 1/2, 1/2]T P = [1/3, 3/10, 7/15]. The steady-state vector for the given transition matrix is [1/3, 3/10, 7/15].
To determine the steady-state vector, we must first find the Eigenvalue λ and Eigenvector v of the given matrix. The expression that we can use to find the steady-state vector of a Markov chain is:P = [I−Q∣1]−1[1,1,...,1]T, where I is the identity matrix of the same size as Q and 1 is a column vector of 1s of the same size as P. Here, Q is the transition matrix, and P is the probability vector. λ and v of the given transition matrix are: [0, -1, 1] and [-2/3, 1/3, 1], respectively. The steady-state vector for the given transition matrix is [1/3, 3/10, 7/15].
A Markov chain is a stochastic model that describes a sequence of events in which the likelihood of each event depends only on the state attained in the preceding event. The steady-state vector of a Markov chain is the limiting probability distribution of the Markov chain. The steady-state vector can be obtained by solving the equation P = PQ, where P is the probability vector and Q is the transition matrix. The steady-state vector represents the long-term behavior of the Markov chain, and it is invariant to the initial state.
To know more about vectors, visit:
https://brainly.com/question/17157624
#SPJ11
Suppose the composition of the Senate is 47 Republicans, 49 Democrats, and 4 Independents. A new committee is being formed to study ways to benefit the arts in education. If 3 senators are selected at random to head the committee, find the probability of the following. wwwww Enter your answers as fractions or as decimals rounded to 3 decimal places. P m The group of 3 consists of all Democrats. P (all Democrats) =
The probability they choose all democrats is 0.093
How to determine the probability they choose all democrats?From the question, we have the following parameters that can be used in our computation:
Republicans = 47
Democrats = 49
Independents = 11
Number of selections = 3
If the selected people are all democrats, then we have
P = P(Democrats) * P(Democrats | Democrats) in 3 places
Using the above as a guide, we have the following:
P = 49/(47 + 49 + 11) * 48/(47 + 49 + 11 - 1) * 47/(47 + 49 + 11 - 2)
Evaluate
P = 0.093
Hence, the probability they choose all democrats is 0.093
Read more about probability at
brainly.com/question/31649379
#SPJ4
You are investigating a portfolio's systematic risk using the CAPM (Capital Asset Pricing Model). The data contains weekly excess returns for one portfolios of stocks (named ret ex) and the excess return on the market portfolio (named mkt.ex). The sample size is 100. The regression results in the following output (values in parentheses are standard errors): ret_ex, = -0.05 + 1.02 x mkt_ex,, R2 = 0.46, SER = 1.4 (0.03) (0.01) a) How would you interpret the estimated coefficient values of -0.05 and 1.2? (10 marks) b) Calculate the 4-statistics of the two coefficients and use them to determine whether the coefficients are statistically significantly different from zero at a 5% significance level. Clearly show how you reach your conclusions. (15 marks) c) You extend the original model above by including two additional independent variables, SMB (size-minus-big) and HML (high-minus-low). The R-squared of the new regression model is 0.69. Use this information to test the null hypothesis that coefficients the two new variables are jointly statistically insignificant using the F-test. Clearly state the null and alternative hypotheses, the value of the F-statistic and the critical value you use. (15 marks) d) "An unbiased estimator is one whose expectation is equal to the true value of the parameter it is estimating." True or false? Briefly comment. (10 marks)
We are given regression results from the CAPM analysis for a portfolio's systematic risk. The estimated coefficients for the intercept and the excess return on the market portfolio are -0.05 and 1.02, respectively.
The R-squared value is 0.46, indicating that the model explains 46% of the variability in the portfolio's excess returns. The standard error of the regression (SER) is 1.4, with standard errors of 0.03 and 0.01 for the intercept and the market portfolio coefficient, respectively.
a) The estimated coefficient of -0.05 for the intercept suggests that the portfolio's excess return is expected to decrease by 0.05 units when the excess return on the market portfolio is zero. The estimated coefficient of 1.02 for the market portfolio indicates that for every 1-unit increase in the excess return on the market portfolio, the portfolio's excess return is expected to increase by 1.02 units.
b) To determine whether the coefficients are statistically significantly different from zero at a 5% significance level, we can perform t-tests. The t-statistic is calculated by dividing the estimated coefficient by its standard error. If the absolute value of the t-statistic exceeds the critical value (obtained from the t-distribution table or statistical software), we can reject the null hypothesis that the coefficient is zero.
For the intercept, the t-statistic is -0.05/0.03 = -1.67. The critical value for a two-tailed test at a 5% significance level with 100 degrees of freedom is approximately ±1.984. Since the absolute value of the t-statistic is less than the critical value (-1.67 < 1.984), we fail to reject the null hypothesis for the intercept.
For the market portfolio coefficient, the t-statistic is 1.02/0.01 = 102. The absolute value of the t-statistic is much larger than the critical value (102 > 1.984), indicating that we can reject the null hypothesis for the market portfolio coefficient and conclude that it is statistically significantly different from zero at a 5% significance level.
c) To test the joint statistical significance of the two new variables (SMB and HML), we can use an F-test. The null hypothesis is that the coefficients of both variables are zero, while the alternative hypothesis is that at least one of the coefficients is non-zero. The F-statistic is calculated as (R-squared / k) / ((1 - R-squared) / (n - k - 1)), where k is the number of variables in the model (2 in this case) and n is the sample size (100). The critical value is obtained from the F-distribution table or statistical software.
Using the given R-squared value of 0.69, k = 2, and n = 100, we can calculate the F-statistic. Assuming a significance level of 5%, the critical value for the F-test with (2, 97) degrees of freedom is approximately 3.17. If the calculated F-statistic is greater than the critical value, we reject the null hypothesis and conclude that at least one of the coefficients of the new variables is statistically significantly different from zero.
d) The statement "An unbiased estimator is one whose expectation is equal to the true value of the parameter it is estimating" is true. An unbiased estimator is one that, on average, provides an estimate of the parameter that is equal to the true value. In statistical terms, it means that the expected value of the estimator is equal to the true value of the parameter. However, it does not guarantee that each
learn more about significance level here; brainly.com/question/4599596
#SPJ11
Consider the normal form game G. Player2 10 L C R Subgame Pre (5,5) L T (5,5) (3,10) (0,4) M planguard (10,3) (4,4) (-2,2) B (4,0) (2,-2) (-10,-10) Let Go (8) denote the game in which the game G is played by the same players at times 0, 1, 2, 3, ... and payoff streams are evaluated using the common discount factor € (0,1). a. For which values of d is it possible to sustain the vector (5,5) as a subgame per- fect equilibrium payoff, by using Nash reversion (playing Nash eq. strategy infinitely
To sustain the vector (5,5) as a subgame perfect equilibrium payoff in the repeated game G using Nash reversion, we need to determine the values of the discount factor d for which this is possible.
In the repeated game Go(8), the players have a common discount factor d ∈ (0,1). For a subgame perfect equilibrium, the players must play a Nash equilibrium strategy in every subgame.
In the given normal form game G, the Nash equilibria are (L, T) and (R, B). To sustain the vector (5,5) as a subgame perfect equilibrium payoff, the players would need to play the strategy (L, T) infinitely in every repetition of the game G.
The strategy (L, T) yields a payoff of (5,5) in the first stage of the game, but in subsequent stages, the players would have incentives to deviate from this strategy due to the possibility of higher payoffs. Therefore, it is not possible to sustain the vector (5,5) as a subgame perfect equilibrium payoff using Nash reversion, regardless of the value of the discount factor d.
Learn more about vectors here: brainly.com/question/24256726
#SPJ11
The average of a sample of high daily temperature in a desert is 114 degrees F. a sample standard deviation or 5 degrees F. and 26 days were sampled. What is the 90% confidence interval for the average temperature? Please state your answer in a complete sentence, using language relevant to this question.
The 90% confidence interval for the average temperature in the desert is between 111.14 and 116.86 degrees Fahrenheit.
We have,
The average of a sample of high daily temperature in a desert is 114 degrees F. a sample standard deviation or 5 degrees F. and 26 days were sampled.
First, we need to determine the standard error of the mean (SEM), which is calculated by dividing the sample standard deviation by the square root of the sample size:
SEM = 5 / √(26) = 0.9766
Next, we need to find the critical value for a 90% confidence interval using a t-distribution table with (26 - 1) degrees of freedom.
This gives us a t-value of 1.706.
We can now calculate the margin of error (ME) by multiplying the SEM with the t-value:
ME = 0.9766 x 1.706 = 1.669
Finally, we can find the confidence interval by subtracting and adding the margin of error to the sample mean:
Lower limit = 114 - 1.669 = 112.331
Upper limit = 114 + 1.669 = 115.669
Therefore, the 90% confidence interval for the average temperature in the desert is between 111.14 and 116.86 degrees Fahrenheit.
Learn more about the standard deviation visit:
https://brainly.com/question/475676
#SPJ4
Teachers' Salaries in North Dakota The average teacher's salary in North Dakota is $35,441. Assume a normal distribution with o = $5100. Round the final answers to at least 4 decimal places and round intermediate z-value calculations to 2 decimal places. Part 1 of 2 What is the probability that a randomly selected teacher's salary is greater than $48,200? Part 2 of 2 For a sample of 70 teachers, what is the probability that the sample mean is greater than $36,1427 Assume that the sample is taken from a large population and the correction factor can be ignored.
Part 1:
Given:
Mean (μ) = $35,441
Standard deviation (σ) = $5,100
To find the probability that a randomly selected teacher's salary is greater than $48,200, we need to calculate the z-score and then find the corresponding probability from the standard normal distribution.
The z-score formula is:
[tex]\[ z = \frac{{X - \mu}}{{\sigma}} \][/tex]
Plugging in the values, we have:
[tex]\[ z = \frac{{48,200 - 35,441}}{{5,100}} \][/tex]
Calculating the z-score:
[tex]\[ z \approx 2.5 \][/tex]
Using the z-score table or statistical software, we find that the probability corresponding to a z-score of 2.5 is approximately 0.9938.
Therefore, the probability that a randomly selected teacher's salary is greater than $48,200 is approximately 0.9938.
Part 2:
Given:
Sample size (n) = 70
Sample mean [tex](\(\bar{x}\))[/tex] = $36,142
Population standard deviation (σ) = $5,100 (given that the sample is taken from a large population)
To find the probability that the sample mean is greater than $36,142, we can use the Central Limit Theorem and approximate the sampling distribution of the sample mean as a normal distribution.
The mean of the sampling distribution [tex](\(\mu_{\bar{x}}\))[/tex] is equal to the population mean [tex](\(\mu\)),[/tex] which is $35,441.
The standard deviation of the sampling distribution [tex](\(\sigma_{\bar{x}}\))[/tex] is calculated using the formula:
[tex]\[ \sigma_{\bar{x}} = \frac{{\sigma}}{{\sqrt{n}}} \][/tex]
Plugging in the values, we have:
[tex]\[ \sigma_{\bar{x}} = \frac{{5,100}}{{\sqrt{70}}} \][/tex]
Calculating the standard deviation of the sampling distribution:
[tex]\[ \sigma_{\bar{x}} \approx 610.4675 \][/tex]
To find the probability that the sample mean is greater than $36,142, we need to calculate the z-score using the formula:
[tex]\[ z = \frac{{\bar{x} - \mu_{\bar{x}}}}{{\sigma_{\bar{x}}}} \][/tex]
Plugging in the values, we have:
[tex]\[ z = \frac{{36,142 - 35,441}}{{610.4675}} \][/tex]
Calculating the z-score:
[tex]\[ z \approx 1.1477 \][/tex]
Using the z-score table or statistical software, we find that the probability corresponding to a z-score of 1.1477 is approximately 0.8749.
Therefore, the probability that the sample mean is greater than $36,142 is approximately 0.8749.
To know more about probability visit-
brainly.com/question/29892330
#SPJ11
determine whether the integral is convergent or divergent. [infinity] 5 1 (x − 4)3/2 dx
Let u=x-4 ⇒ du=dx Putting x=u+4$ in the integral,
[tex]\int\limits^5_1 {(x-4)^{\frac{3}{2} } } \, dx[/tex] = [tex]\int\limits^1_{-3} {u}^{\frac{3}{2} } \, du[/tex]
We integrate using the power rule of integration and get ;
[tex]\int\limits^1_{-3} {u}^{\frac{3}{2} } \, du[/tex] = [tex][\frac{2}{5}u^{\frac{5}{2}}]\limits^1_{-3}[/tex] = [tex]\frac{2}{5}(1^{\frac{5}{2} }-(-3)^{\frac{5}{2} } )[/tex] = [tex]\frac{40}{5}[/tex] = 8
Since this integral exists, and it is finite, the integral is convergent.
We are given
[tex]\int\limits^5_1 {(x-4)^{\frac{3}{2} } } \, dx[/tex]
We note that this integral is improper at x= ∞ but not at x=-∞; so we only need to check whether this integral exists or not.Using u-substitution,
we let u=x-4 ⇒ du=dx.
Then, putting x=u+4 in the integral, we get
[tex]\int\limits^1_5 {(x-4)}x^{\frac{3}{2} } \, dx[/tex] = [tex]\int_{-3}^{1}ux^{\frac{3}{2} }\, du[/tex]
We can then use the power rule of integration to solve the integral as follows:
[tex]\int_{-3}^{1}u^{\frac{3}{2} }\, du[/tex] = [tex]\left[\frac25u^{\frac52}\right] _{-3}^1[/tex] = [tex]\frac25(1^{\frac52}-(-3)^{\frac52})[/tex] = [tex]\frac{40}{5}[/tex] = 8
Since this integral exists, and it is finite, the integral is convergent. Therefore, the given integral converges.Therefore, the given integral
[tex]\int_1^5(x-4)^{\frac32}dx[/tex] is convergent.
To know more about integration visit:
brainly.com/question/31744185
#SPJ11
The vectors a and ẻ are such that |ả| = 3 and |ẻ| = 5, and the angle between them is 30°. Determine each of the following:
a) |d + el
b) |à - e
c) a unit vector in the direction of a + e
The answer to this question will be:
a) |d + e| = √(39 + 6√3)
b) |a - e| = √(39 - 6√3)
c) Unit vector in the direction of a + e: (a + e)/|a + e|
To determine the magnitude of the vectors, we can use the given information and apply the relevant formulas.
a) To find the magnitude of the vector d + e, we need to add the components of d and e. The magnitude of the sum can be calculated using the formula |d + e| = √(x^2 + y^2), where x and y represent the components of the vector. In this case, the components are not given explicitly, but we can use the properties of vectors to express them. The magnitude of a vector can be represented as |v| = √(v1^2 + v2^2), where v1 and v2 are the components of the vector. Thus, the magnitude of d + e can be expressed as √((d1 + e1)^2 + (d2 + e2)^2).
b) Similarly, to find the magnitude of the vector a - e, we subtract the components of e from the components of a. Using the same formula as above, we can express the magnitude of a - e as √((a1 - e1)^2 + (a2 - e2)^2).
c) To find a unit vector in the direction of a + e, we divide the vector a + e by its magnitude |a + e|. A unit vector has a magnitude of 1. Therefore, the unit vector in the direction of a + e can be calculated as (a + e)/|a + e|.
Learn more about Vector
brainly.com/question/24256726
#SPJ11
Employees at a construction and mining company claim that the mean salary of the company for mechanical engineers is less than that one of its competitors at $ 95,000. A random sample of 30 for the company's mechanical engineers has a mean salary of $85,000. Assume the population standard deviation is $ 6500 and the population is normally distributed. a = 0.05. Find H0 and H1. Is there enough evidence to rejects the claim?
The null hypothesis (H₀) is > $95,000 and The alternative hypothesis (H₁) is <95,000
The calculated test statistic (-5.602) is smaller than the critical value (-1.699), we have enough evidence to reject the null hypothesis (H0). This suggests that the mean salary of the company for mechanical engineers is indeed less than $95,000, supporting the claim made by the employees.
To test the claim that the mean salary of the company for mechanical engineers is less than that of its competitor, we can set up the null hypothesis (H₀) and alternative hypothesis (H₁) as follows:
H₀: The mean salary of the company for mechanical engineers is equal to or greater than $95,000.
H₁: The mean salary of the company for mechanical engineers is less than $95,000.
Since we want to test if the mean salary is less than the claimed value, this is a one-tailed test.
Next, we can calculate the test statistic using the sample mean, population standard deviation, sample size, and significance level. We'll use a t-test since the population standard deviation is known.
Sample mean (x(bar)) = $85,000
Population standard deviation (σ) = $6,500
Sample size (n) = 30
Significance level (α) = 0.05
The test statistic is calculated as:
t = (x(bar) - μ) / (σ / √n)
Substituting the values:
t = ($85,000 - $95,000) / ($6,500 / √30)
t = -10,000 / ($6,500 / √30)
t ≈ -5.602
Next, we can compare the calculated test statistic with the critical value from the t-distribution at the specified significance level and degrees of freedom (n - 1 = 29). Since α = 0.05 and this is a one-tailed test, the critical value is approximately -1.699 (obtained from a t-table).
Since the calculated test statistic (-5.602) is smaller than the critical value (-1.699), we have enough evidence to reject the null hypothesis (H₀). This suggests that the mean salary of the company for mechanical engineers is indeed less than $95,000, supporting the claim made by the employees.
To know more about null hypothesis click here :
https://brainly.com/question/30351745
#SPJ4
The statistics of n = 22 and s = 14.3 result in this 95% confidence interval estimate of sigma: 11.0 < sigma 20.4. That confidence integral can also be expressed as (11.0, 20.4). Given that 15.7 plusminus 4.7 results in values of 11.0 and 20.4, can be confidence interval be expressed as 15.7 plusminus 4.7 as well?
a.Yes, Since the chi-square distribution is symmetric, a confidence interval for sigma can be expressed as 15.7 plusminus 4.7.
b.Yes, In general, a confidence interval for sigma has s at the center.
c.No. The formal implies that s = 15.7, but is given as 14.3, in general, a confidence interval for sigma does not have s at the center.
d.Not enough information
The answer is (c) No. The confidence interval for sigma, given as (11.0, 20.4), cannot be expressed as 15.7 ± 4.7. The reason is that the confidence interval is based on the sample standard deviation s, which is given as 14.3, not 15.7.
The confidence interval represents a range of values within which the population parameter (sigma) is likely to fall. It does not imply that the sample standard deviation is equal to the midpoint of the interval. In general, a confidence interval for sigma does not have the sample standard deviation at the center.
The confidence interval estimate of sigma, given as (11.0, 20.4), is obtained using the sample standard deviation s and the chi-square distribution. The interval indicates that there is a 95% probability that the true population standard deviation falls within the range (11.0, 20.4).
The value of s, which is 14.3 in this case, represents the estimate of the population standard deviation based on the sample data. However, it does not necessarily coincide with the center or midpoint of the confidence interval. Therefore, expressing the confidence interval as 15.7 ± 4.7 would be incorrect.
Learn more about statistics here: brainly.com/question/32201536
#SPJ11
Factor completely 3x − 12.
a Prime
b 3x(−12)
c 3(x − 4)
d 3(x + 4)
There are no more common factors or like terms that can be further simplified, the expression 3x - 12 is already in its completely factored form.
Therefore, the answer is:c) 3(x - 4)
To factor completely the expression 3x - 12, we can first look for a common factor among the terms. In this case, both 3x and 12 have a common factor of 3.
We can factor out the common factor of 3 from both terms:
3x - 12 = 3(x) - 3(4)
Now, we can simplify the expression:
3x - 12 = 3x - 12
Since there are no more common factors or like terms that can be further simplified, the expression 3x - 12 is already in its completely factored form.
Therefore, the answer is:c) 3(x - 4).
For more questions on factors .
https://brainly.com/question/25829061
#SPJ8
Find T, N, and k for the plane curve r(t)=ti+ In (cost)j. - ż/2 < t < ż/2 T(t) = (___)i + (___)j N(t) = (___)i+(___)j k(t)= ___
The plane curve is given by[tex]`r(t) = ti + ln (cos t) j`.[/tex]Let's calculate the first derivative of `r(t)` with respect to [tex]`t`.`r'(t) = i + (-tan t) j`[/tex]
Let's find the length of `r'(t)`.The length of [tex]`r'(t)` is `|r'(t)| = sqrt(1 + tan^2 t)[/tex] = sec t`. Therefore, the unit tangent vector r `T(t)` is given by `[tex]T(t) = (1/sec t) i + (-tan t/sec t) j`[/tex]. Let's differentiate `T(t)` with respect to `t`.[tex]`T'(t) = (-sec t tan t) i + (-sec t - tan^2 t)[/tex]j`The length of `T'(t)` is `|T'(t)| = sec^3 t`. Therefore, the unit normal vector `N(t)` is given by [tex]`N(t) = (-sec t tan t) i + (-sec t - tan^2 t) j`.[/tex]The curvature `k(t)` is given by `k(t) =[tex]|T'(t)|/|r'(t)|^2 = sec t/(sec t)^2 = 1/sec t = cos t`[/tex]. Therefore, [tex]`T(t) = (1/sec t) i + (-tan t/sec t) j`, `N(t)[/tex] = [tex](-sec t tan t) i + (-sec t - tan^2 t) j`,[/tex] and `k(t) = cos t`. In conclusion,[tex]`T(t) = (1/sec t) i + (-tan t/sec t) j`, `N(t)[/tex] =[tex](-sec t tan t) i + (-sec t - tan^2 t) j`[/tex], and `k(t) = cos t` for the plane curve[tex]`r(t) = ti + ln (cos t) j`.[/tex]
The answer is as follows:[tex]T(t) = (1/sec t) i + (-tan t/sec t) jN(t) = (-sec t tan t) i + (-sec t - tan^2 t) jk(t) = cos t[/tex]
To know more about Derivative visit-
https://brainly.com/question/29144258
#SPJ11
A ball is thrown into the air and it follows a parabolic path. Consider a small portion of this path defined by f(x) = (x-1)² in the interval 0
The given function f(x) = (x-1)² represents a parabolic path. Let's consider the interval 0 < x < 2, which lies within the portion of the path defined by f(x) = (x-1)².
To find the coordinates of the highest point on this portion of the path, we need to determine the vertex of the parabola. The vertex of a parabola in the form f(x) = a(x-h)² + k is located at the point (h, k). In this case, the vertex of the parabola (x-1)² is at the point (1, 0), which corresponds to the highest point on the path.
Therefore, the highest point on the parabolic path defined by f(x) = (x-1)² in the interval 0 < x < 2 is located at the coordinates (1, 0).
Learn more about parabolic path here: brainly.com/question/20714017
#SPJ11
The vector q = (0,5,-3) starts at the point P=(-1,0,5). At what point does the vector end?
The vector q = (0, 5, -3) starts at the point P = (-1, 0, 5).We need to add the components of the vector to the coordinates of the starting point the vector q = (0, 5, -3) ends at the point (-1, 5, 2).
The vector q = (0, 5, -3) has three components: one for each coordinate axis (x, y, and z). We add these components to the corresponding coordinates of the starting point P = (-1, 0, 5) to find the coordinates of the endpoint.
Adding the x-component, 0, to the x-coordinate of P, -1, gives us -1 + 0 = -1. Therefore, the x-coordinate of the endpoint is -1.
Adding the y-component, 5, to the y-coordinate of P, 0, gives us 0 + 5 = 5. Thus, the y-coordinate of the endpoint is 5.
Adding the z-component, -3, to the z-coordinate of P, 5, yields 5 + (-3) = 2. Consequently, the z-coordinate of the endpoint is 2.
Therefore, the vector q = (0, 5, -3) ends at the point (-1, 5, 2).
To learn more about components of the vector click here : brainly.com/question/1686398
#SPJ11
Gert is buying floor tile to put in a room that is 3.5 yds ×
4yards. What is the area of the room in square feet? Show your
work. Include units in your work and result.
The area of the room is 168 square feet, obtained by multiplying the length (3.5 yards converted to 10.5 feet) by the width (4 yards converted to 12 feet).
To calculate the area of the room, we first need to convert the measurements from yards to feet. Since 1 yard is equal to 3 feet, the length of the room is 3.5 yards × 3 feet/yard = 10.5 feet, and the width is 4 yards × 3 feet/yard = 12 feet.
To find the area, we multiply the length by the width: 10.5 feet × 12 feet = 126 square feet.
Therefore, the area of the room is 126 square feet.
It's important to include units in our calculations to ensure accurate measurements and conversions. In this case, we converted the measurements from yards to feet to maintain consistency. By multiplying the length and width, we obtained the total area of the room in square feet, which is 126 square feet.
To learn more about Area calculation, visit:
https://brainly.com/question/2607596
#SPJ11
Suppose H is a 3 x 3 matrix with entries hij. In terms of det (H
We can also use the following formula for matrices larger than 3 x 3:det(A) = a11A11 + a12A12 + … + a1nA1nwhere A11, A12, A1n are the cofactors of the first row.
Suppose H is a 3 x 3 matrix with entries hij. In terms of det (H), we can write that the determinant of matrix H is represented by the following equation:
det(H)
= h11(h22h33 − h23h32) − h12(h21h33 − h23h31) + h13(h21h32 − h22h31)
Therefore, we can say that det(H) is expressed as a sum of products of three elements from matrix H.
It can also be said that the determinant of a matrix is a scalar value that can be used to describe the linear transformation between two-dimensional spaces.
To calculate the determinant of a 3 x 3 matrix, we use the formula above.
We can also use the following formula for matrices larger than 3 x 3:det(A) = a11A11 + a12A12 + … + a1nA1nwhere A11, A12, A1n are the cofactors of the first row.
To know more about matrices visit:-
https://brainly.com/question/13260135
#SPJ11
Perform the rotation of axis to eliminate the xy-term in the quadratic equation 9x² + 4xy+9y²-20=0. Make it sure to specify: a) the new basis b) the quadratic equation in new coordinates c) the angle of rotation. d) draw the graph of the curve
The given quadratic equation is 9x² + 4xy + 9y² - 20 = 0. The rotation of axis is performed to eliminate the xy-term from the equation. The steps are given below.
a) New Basis: To find the new basis, we need to find the angle of rotation first. For that, we need to use the formula given below.tan2θ = (2C) / (A - B)Here, A = 9, B = 9, and C = 2We can substitute the values in the above equation.tan2θ = (2 x 2) / (9 - 9)tan2θ = 4 / 0tan2θ = Infinity. Therefore, 2θ = 90°θ = 45° (since we want the smallest possible value for θ)Now, the new basis is given by the formula given below. x = x'cosθ + y'sinθy = -x'sinθ + y'cosθWe can substitute the value of θ in the above formulas to obtain the new basis. x = x'cos45° + y'sin45°x = (1/√2)x' + (1/√2)y'y = -x'sin45° + y'cos45°y = (-1/√2)x' + (1/√2)y'
b) Quadratic Equation in New Coordinates: To obtain the quadratic equation in new coordinates, we need to substitute the new basis in the given equation.9x² + 4xy + 9y² - 20 = 09((1/√2)x' + (1/√2)y')² + 4((1/√2)x' + (1/√2)y')((-1/√2)x' + (1/√2)y') + 9((-1/√2)x' + (1/√2)y')² - 20 = 09(1/2)x'² + 4(1/2)xy' + 9(1/2)y'² - 20 = 04x'y' + 8.5x'² + 8.5y'² - 20 = 0Therefore, the quadratic equation in new coordinates is given by 4x'y' + 8.5x'² + 8.5y'² - 20 = 0
c) Angle of Rotation: The angle of rotation is 45°.
d) Graph of the Curve: The graph of the curve is shown below.
Learn more about quadratic equations:
https://brainly.com/question/1214333
#SPJ11