Answers
Answer:
hydrogen and cloride + hydrogen
Related Questions
Potato farmers in Ireland during the mid 1800s all grew the same type of potato. The potato plants were all produced as clones of one another. When a fungus infected the crop, all of the potatoes were destroyed. This occurred because these potato plants
Answers
Answer:
The crop failures were caused by late blight, a disease that destroys both the leaves and the edible roots, or tubers, of the potato plant.
What other small steps can we take to save water ?
Answers
Answer:
Check your toilet for leaks. ...
Stop using your toilet as an ashtray or wastebasket. ...
Put a plastic bottle in your toilet tank. ...
Take shorter showers. ...
Install water-saving shower heads or flow restrictors. ...
Take baths. ...
Turn off the water while brushing your teeth. ...
Turn off the water while shaving.
Explanation:
Answer:
keeping the water clean
Explanation:
avoid dumping rubish in the water
2. Can you say that the matter which underwent a chemical change is still the
same substance as before? Why?
Answers
Answer:
No
Explanation:
A chemical change is a change that involves a change in the chemical composition of matter. A new substance is formed. In a chemical change, new chemical and physical properties of the substance are formed. In a chemical change, the chemical and physical properties of the substance formed will be different from the original substance.
The matter which underwent a chemical change is not still the same substance as before.
What is Chemical change?This is the type of change which occurs when two substances known as reactants react to form a new product.
The formation of a new product through bonding and other parameters thereby makes the substance to be different as it was before.
Read more about Chemical change here https://brainly.com/question/11987405
Calculate the temperature of a gas when it is expanded to 5.25L. The gas originally occupies 3.90L of space at 252K.
Answers
Answer:
[tex]T_2=339K[/tex]
Explanation:
Hello there!
In this case, according to the Charles' gas law as way to understand the volume-temperature as a directly proportional relationship for this problem, we can write:
[tex]\frac{T_2}{V_2}=\frac{T_1}{V_1}[/tex]
Thus, given the initial temperature and volume and the final volume, we are able to calculate the final temperature as follows:
[tex]T_2=\frac{T_1V_2}{V_1} \\\\T_2=\frac{252K*5.25L}{3.90L}\\\\T_2=339K[/tex]
Best regards!
Use the scenario to answer the following question.
A group of students working in a chemistry lab is planning a procedure to neutralize 25.0mL of 2.0 M hydrochloric acid (strong acid) with 1.0 M potassium hydroxide (strong base). In their procedure they plan on adding an equal volume of the base to the acid.
What would be the expected outcome of carrying out this step as planned?
A.
The resulting pH will be equal to 7 because a strong base will neutralize a strong acid.
B.
The resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
C.
The resulting pH will be greater than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
D.
The resulting pH will not be able to be determined because the concentrations of the acid and base are not the same.
Answers
You have 2.0 M HCl and 1.0 M KOH. If you have 25 mL of both, you have double the moles of HCl, since it’s more concentrated, so your final solution will still be acidic.
The expected outcome of carrying out this step as planned is :
B. The resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
Acid and basesThe expected outcome of carrying out this step as planned is the resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
pH may be a degree of how acidic/basic water is.
The run goes from - 14, with 7 being unbiased. pHs of less than 7 demonstrate causticity, while a pH of more noteworthy than 7 demonstrates a base.
pH is truly a degree of the relative amount of free hydrogen and hydroxyl particles within the water
Thus, the correct answer is B.
Learn more about "Acids":
https://brainly.com/question/6872943?referrer=searchResults
What is the percentage composition of C6H12O6? Must show work.
Answers
Answer:
I think the percent composition of carbon in C6H12O6 is: 25% C 40% C 7% C
Explanation:
How many grams of HCL are needed to make 500.0 mL of a 0.100 M solution?
Answers
Answer:
1.44 g
Explanation:
The problem gives you the molarity and volume of the target solution, so right from the start you know that you can use that information to determine the number of moles of hydrochloric acid that it must contain.
So, molarity measures a solution's concentration in terms of how many moles of solute, which in your case is hydrochloric acid, you get per liter of solution.
A
0.158 M
hydrochloric acid solution contains
0.158
moles of hydrochloric acid for very liter of solution. Since you're dealing with
250 mL
, the equivalent of
1
4
th
of a liter, your solution will contain
250
mL
⋅
1
L
10
3
mL
⋅
0.158 moles HCl
1
L
=
0.0395 moles HCl
Now that you know how many moles of hydrochloric acid are needed to prepare your solution, use the compound's molar mass to convert this to grams
0.0395
moles HCl
⋅
36.46 g
1
mole HCl
=
∣
∣
∣
∣
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
a
a
1.44 g
a
a
∣
∣
−−−−−−−−−−
Explanation:
Please brainliest.
Determine the AMOUNT OF NO2, LIMITING REACTANT, AND THE AMOUNT AND NAME OF EXCESS REACTANT.
10.00 g of O2 reacts with 20.00 g NO
The molar masses of O2, NO, and NO2 are 32.00 g/mol, 30.01 g/mol, and 46.01 g/mol, respectively
Answers
Answer:
balanced equation mole ratio 5 2 mol NO/1 mol O2
10.00 g O2 3 1 mol O2/32.00 g O2 5 0.3125 mol O2
20.00 g NO 3 1 mol NO/30.01 g NO 5 0.6664 mol NO
actual mole ratio 5 0.6664 mol NO/0.3125 mol O2 5 2.132 mol NO/1.000 mol O2
Because the actual mole ratio of NO:O2 is larger than the balanced equation mole
ratio of NO:O2, there is an excess of NO; O2 is the limiting reactant.
Mass of NO used 5 0.3125 mol O2 3 2 mol NO/1 mol O2 5 0.6250 mol NO
0.6250 mol NO 3 30.01 g NO/1 mol NO 5 18.76 g NO
Mass of NO2 produced 5 0.6250 mol NO2 3 46.01 g NO2/1 mol NO2 5 28.76 g NO2
Excess NO 5 20.00 g NO 2 18.76 g NO 5 1.24 g N
Explanation:
AH for the reaction
IF5 (g) → IF3 (g) + F2 (g)
kJ, give the data below.
IF (8) + F2 (g) → IF3 (8)
IF (g) + 2F2(8) ► F5 (8)
AH=-390 kJ
AH=-745 kJ
A) -1135
B) +35
C) +1135
D) -35
E) +355
Answers
Answer:
E) +355 kJ
Explanation:
Based on Hess's law, it is possible to obtain ΔH of a reaction from the sum of similar reactions:
(1) IF(g) + F2(g) → IF3(g) ΔH = -390kJ
(2) IF(g) + 2F2(g) → IF5(g) ΔH = -745kJ
The sum of (1) - (2) is:
IF(g) + F2(g) → IF3(g)
IF5(g) → IF(g) + 2F2(g)
_________________
IF5(g) → IF3(g) + F2(g)
ΔH = -390kJ - (-745kJ)
ΔH = +355kJ
Right answer is:
E) +355 kJ
How many liters of water do we need to add to 5.00 moles to get a 0.648 M solution?
Answers
Answer: This is a typical acid/base equilibrium problem, that involves the use of logarithms.
Explanation:We assume that both nitric acid and hydrochloric acid dissociate to give stoichiometric
H
3
O
+
.
Moles of nitric acid:
26.0
×
10
−
3
⋅
L
×
8.00
⋅
m
o
l
⋅
L
−
1
=
0.208
⋅
m
o
l
H
N
O
3
(
a
q
)
.
And, moles of hydrochloric acid:
88.0
×
10
−
3
⋅
L
×
5.00
⋅
m
o
l
⋅
L
−
1
=
0.440
⋅
m
o
l
H
C
l
(
a
q
)
.
This molar quantity is diluted to
1.00
L
. Concentration in moles/Litre =
(
0.208
+
0.440
)
⋅
m
o
l
1
L
=
0.648
⋅
m
o
l
⋅
L
−
1
.
Now we know that water undergoes autoprotolysis:
H
2
O
(
l
)
⇌
H
+
+
O
H
−
. This is another equilibrium reaction, and the ion product
[
H
+
]
[
O
H
−
]
=
K
w
. This constant,
K
w
=
10
−
14
at
298
K
.
So
[
H
+
]
=
0.648
⋅
m
o
l
⋅
L
−
1
;
[
O
H
−
]
=
K
w
[
H
+
]
=
10
−
14
0.648
=
?
?
p
H
=
−
log
10
[
H
+
]
=
−
log
10
(
0.648
)
=
?
?
Alternatively, we know further that
p
H
+
p
O
H
=
14
. Once you have
p
H
,
p
O
H
is easy to find. Take the antilogarithm of this to get
[
O
H
−
]
.
Answer link
help it’s for today, not accepting links
How is Percent Composition of a molecule by atoms different than Percent Composition of a molecule by mass of?
Answers
Answer:
Percent composition by mulecules is: (mass of element/molecular mass) x 100
Percent composition by atoms is: (mass of element/molecular mass) x 100.
Explanation:
So their the same
A functional group is a specific arrangement of atoms in an organic compound that is acmpavle if characteristic reactions
Is this True or false
Does not having the word (chemical )before reactions make it false
Please help i would appreciate it
Answers
Explanation:
(a) a functional group is a special group of atoms or bonds in a compound that is responsible for the chemical reactions, behavior, and characteristics of that compound. (b) Functional group is present in both the compound is alcohol (-OH).
Functional groups are specific groupings of atoms within molecules that have their own characteristic properties, regardless of the other atoms present in a molecule. Common examples are alcohols, amines, carboxylic acids, ketones, and ethers.
Key Points
Functional groups are often used to “functionalize” a compound, affording it different physical and chemical properties than it would have in its original form.
Functional groups will undergo the same type of reactions regardless of the compound of which they are a part; however, the presence of certain functional groups within close proximity can limit reactivity.
Functional groups can be used to distinguish similar compounds from each other.
Key Terms
functional group: A specific grouping of elements that is characteristic of a class of compounds, and determines some properties and reactions of that class.
functionalization: Addition of specific functional groups to afford the compound new, desirable properties.
Dinitrogen oxide (N2O) gas was generated from the thermal decomposition of ammonium nitrate and collected over water. The wet gas occupied 123 mL at 21◦C when the atmospheric pressure was 760 Torr. What volume would the same amount of dry dinitrogen oxide have occupied if collected at 760 Torr and 21 ◦C? The vapor pressure of water is 18.65 Torr at 21◦C. Answer in units of mL.
Answers
Answer:
119.98 mL
Explanation:
Initial volume V1 = 123 ml
Initial temperature = T1 = 21◦C + 273 = 294 K
Initial pressure P1 = 760 Torr - 18.65 Torr = 741.35 Torr
Final volume V2= ???
Final temperature = T2= 21◦C + 273 = 294 K
Final pressure P2 = 760 Torr
From;
P1V1/T1= P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2= 741.35 * 123 * 294/760 * 294
V2 = 119.98 mL
What is the molar mass of CH 4 ? (C = 12.01g / m * o * l, H = 1.008g / m * o * l)
Answers
25 g of 116oC steam are bubbled into 0.2384 kg of water at 8oC. Find the final temperature of the system.
Answers
Answer: The final temperature of the system will be [tex]13.14^0C[/tex]
Explanation:
[tex]heat_{absorbed}=heat_{released}[/tex]
As we know that,
[tex]Q=m\times c\times \Delta T=m\times c\times (T_{final}-T_{initial})[/tex]
[tex]m_1\times c_1\times (T_{final}-T_1)=-[m_2\times c_2\times (T_{final}-T_2)][/tex] .................(1)
where,
q = heat absorbed or released
[tex]m_1[/tex] = mass of steam = 25 g
[tex]m_2[/tex] = mass of water = 0.2384 kg = 238.4 g (1kg=1000g)
[tex]T_{final}[/tex] = final temperature = ?
[tex]T_1[/tex] = temperature of steam = [tex]116^oC[/tex]
[tex]T_2[/tex] = temperature of water = [tex]8^oC[/tex]
[tex]c_1[/tex] = specific heat of steam = [tex]1.996J/g^0C[/tex]
[tex]c_2[/tex] = specific heat of water= [tex]4.184J/g^0C[/tex]
Now put all the given values in equation (1), we get
[tex]25g\times 1.996J/g^0C\times (T_{final}-116)=-[238.4g\times 4.184J/g^0C\times (T_{final}-8)][/tex]
[tex]T_{final}=13.14^0C[/tex]
Therefore, the final temperature of the system will be [tex]13.14^0C[/tex]
Use the masses of the elements below to calculate the mass of 8.70 moles of H3M (the number at the bottom of
each square is the atomic mass of that element)
1
2
3
4
5
6
A
H
C
B
M
Sm
aragon
hillsdale
capuchino
mills
burlingame
san mateo
1.10
3.50
7.09
11.22
15.23
18.98
Given:
Wanted
Relationship: 1 mole H3M =
grams
Final answer
grams
Answers
yes use the masses of an element below calculate the mass of it 8.70 mole of each 3M
1. What is the function of the circulatory system? * 10 points A. Provide blood with oxygen from the air, & to get rid of carbon dioxide B. Carry oxygen, nutrients, waste, & to fight pathogens C. Secrete hormones to regulate the body and maintain homeostasis D. Produce red blood cells, white blood cells, & platelets
Answers
Answer:
B. Carry oxygen, nutrients, waste, & to fight pathogens
Explanation:
The circulatory system refers to all organs and tissues involved in carrying blood and lymph around the body.
The circulatory system carries oxygenated blood from the heart to cells and deoxygenated blood back to the heart.
Nutrients are carried in the blood to cells in different parts of the body and waste products are also carried from cells in the blood.
White blood cells is a component of blood in the circulatory system that fights off diseases.
Balance the following reactions:
1. PbO2 → PbO + O2
Answers
Explanation:
2 moles of lead oxide ->
2PbO2 -> 2PbO + O2
FREE BRAINLIEST!!!!! You have two objects. One is hot the other is cold (lack of heat). In what direction does the heat want to travel?
Answers
Answer:
the heat wants to travel up. Heat rises
Explanation:
4. Nowadays, clinical thermometer is replaced by digital thermometer,why?
Answers
Answer:
Digital thermometer are used these days instead of clinical thermometers because: Digital thermometers are designed to be more accurate. Most digital thermometers have digital screening which extract temperature of wherever you are measuring.What pressure, in atm, would be equal to 798 mmHg?
Answers
Answer:
1.05 atm
It should be 1 atm = 760 mm; therefore, 798 mm x (1 atm/760) = about 1.05 atm.
The value of pressure in atm that would be equal to 798 mmHg is 1.05 atmospheric.
What is pressure?Pressure is a physical quantity or a kind of force which is perpendicularly applied on the surface area of any object so that force is equally distributed on that surface.
Pressure will be maesured by various unit and have relation with one another.
As we know that, 1 atm = 760 mmHg
Or 1 mmHg = 1/760atm
Given quantity of pressure is 798 mmHg and we calculate this quantity by multiply this value by 1/760 and we get,
798 mmHg = 798mmHg × 1/760atm/mmHg = 1.05 atm
Hence required value of pressure is 1.05 atm.
To know more about pressure units, visit the below link:
https://brainly.com/question/17386864
How long does cream of tartar activate
Answers
how many grams are in 2.34 moles of Li?
Answers
Answer:
The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Lithium, or 6.941 grams.
Thus, the answer would be 16.24194.
Explanation:
Need help on this question asap pleasee
No links
Answers
Answer:
Endothermic
Explanation:
An endothermic reaction is one in which energy is absorbed while an exothermic reaction is one in which energy is given out(evolved).
If we look at the reaction as written; 3C(graphite) + 3H2(g) + 88kcal -------> C3H8(g), we will notice that;
i) 88kcal of energy had to be absorbed for the reaction to occur
ii) The enthalpy change for the reaction is positive.
Since energy must be taken in to drive the forward reaction, then the reaction is endothermic as written.
I didn’t study for this lol if your answer correct I’ll mark ur answer brainliest
Answers
Answer:
3
Explanation:
3 is the answer is did this a little while ago
science helpppppppppppppppppppppppppppppppp
Answers
Answer: it should be 80g
Explanation:
Explain the laboratory preparation of hydrogen
Answers
Answer:
laboratory preparation off Hydrogen: Hydrogen is prepared in the laboratory by the action of the dilute hydrochloric acid or dilute sulphuric acid on granulated zinc. Use of Granulated Zinc Granulated zinc contains an impurity like copper which acts as a positive catalyyst.
Explanation:
Hope this helps!
The concentration of C6H12O6 may be represented as (C6H12O6) {C6H12O6} [C6H12O6]
Answers
Answer:
[tex][C_6H_{12}O_6][/tex]
Explanation:
Hello there!
In this case, since the concept of solution concentration is majorly used in terms of moles per liters of solution or molarity (M), it is also possible to represent this chemical unit by using squared brackets, [ ].
In such a way, when focused on the concentration of glucose, C6H12O6, we can use:
[tex][C_6H_{12}O_6][/tex]
Best regards!
What volume will 1000 grams of nitrogen dioxide occupy at 380 mmHg at 0°C
Answers
0.69(78)Explanation:
Need help to find the molarity. Please help!
Answers
Answer:
0.092M
Explanation:
Molarity of glucose solution = number of moles ÷ volume
According to this question, 12.5g of glucose (C6H12O6) is dissolved in enough water to make 750mL of solution.
Molar mass of glucose (C6H12O6) = 12(6) + 1(12) + 16(6)
= 72 + 12 + 96
= 180g/mol
mole = mass/molar mass
mole = 12.5/180
mole = 0.069mol
Volume of solution = 750mL = 750/1000 = 0.750L
Hence, molarity = n/V
Molarity = 0.069 ÷ 0.750
Molarity = 0.092M