The force between the two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Hence, if distance between charges is halved (charges remaining kept constant), the force between the two charges is quadrupled.
Quia
Active
16:05:5
A plant root is an example of
Answer:A plant root is an example of an organ
Explanation:The main function of the root is to collect nutrients and water from the soil.
Answer:
hi sorry i just want points YOSHIII :3
Explanation:
Two window washers, Bob and Joe, are on a 3.00 m long, 395 N scaffold supported by two cables attached to its ends. Bob weighs 805 N and stands 1.00 m from the left end. Two meters from the left end is the 500 N washing equipment. Joe is 0.500 m from the right end and weighs 820 N. Given that the scaffold is in rotational and translational equilibrium, what are the forces on each cable
Answer:
- the forces on the left hand side is 1.038 kN
- the forces on the right hand side is 1.483 kN
Explanation:
Given the data in the question, as illustrated in the image below;
Length of the scaffold = 3 m
weight of the scaffold = 395 N
Weight of Bob = 805 N and stands 1 m from the left end
weight of washing equipment = 500N and on sits 2 m from the left end
Weight of Joe = 820 N and stand 0.500 m from the right end
so the force on the left cable will be;
[tex]T_{left[/tex] = [tex]\frac{1}{3m}[/tex][ (805 N)( (3-1) m) + ( 395 N )( [tex]\frac{3}{2} m[/tex]) + ( 500 N )(1m ) + ( 820 N)( 0.500m ) ]
[tex]T_{left[/tex] = [tex]\frac{1}{3m}[/tex][ 1610 + 592.5 + 500 + 410 ]
[tex]T_{left[/tex] = [tex]\frac{1}{3m}[/tex][ 3112.5 ]
[tex]T_{left[/tex] = 1037.5 N
[tex]T_{left[/tex] = 1.038 kN
Therefore, the forces on the left hand side is 1.038 kN
On the right hand side;
[tex]T_{Right[/tex] = ( 805 N + 395 N + 500 N + 820 N ) - 1037.5 N
[tex]T_{Right[/tex] = 2520 N - 1037.5 N
[tex]T_{Right[/tex] = 1482.5 N
[tex]T_{Right[/tex] = 1.483 kN
Therefore, the forces on the right hand side is 1.483 kN
A student with a mass of 52 kg, starts from rest and travels down a 2 m slide. What is
the KE of the student at the bottom of the slide?
Answer:
https://www.ux1.eiu.edu/~cfadd/1350/Hmwk/Ch08/Ch8.html
Explanation:
An airplane flew from San Francisco to Washington, D.C. Approximately
halfway through the flight, the plane had traveled 2,000 km in 2.5 hours.
What was the speed during this period?
Another airplane is flying in the opposite direction. It covers the same distance in exactly 2 hours. What was its speed and direction during this period?
Answer:
The solution is given below:
Explanation:
The computation of the speed is shown below
As we know that
Speed = distance ÷ time
where
distance is 2000 km
And, the time is 2.5 hours
SO, the speed is
= 2,000 ÷ 2.5
= 800 km/h
Now the distance would be the same i.e. 2,000 km
but the time is 2 hours
So, the speed is
= 2,000 km ÷ 2 hours
= 1,000 km/hr
The direction should be opposite to the first airplane
Which type of diffraction occurs when the point source and the screen are at finite distances from the obstacle forming the diffraction pattern?
A. fraunhofer
B. fresnel
C. far-field
D. single slit
Can someone make a list of 10 simple things people can do to maintain fitness ? Or don’t list a lot
Answer:
1. sleep well
2. drink water
3. eat healthy
4. less sugar and salt
5. exercise 30 minutes daily
6. eat whole grains
7. eat fruits and vegetables
8. practice mental health
9. stay motivated
10. eat a variety of foods
we cannot work without food why
Answer:
Food supplies the body with energy and without energy the body cannot work.
helpppppppppppppppppppppppppppp............
an object is moving with initial velocity of 5 m/s. After 10 seconds final velocity is 10 m/s. Calculate its acceleration.
Answer:
0.5 m/s 2 is the acceleration
Explanation:
hope it helped!!!
please help me with this! i will give brainliest if you get it right! NO LINKS OR IM REPORTING
Sarah is a 30 year old white female. Her occupation is part time chef. She is recently been divorced and has custody of
her three children. She has extreme changes in her mood that began to appear in her 20's but she never went to
see a
doctor about them. When family tries to talk to her about her upset, she reacts by becoming angry and blaming them
for her situation. She is currently complaining of crying episodes, not eating, headaches, thinking she is a failure,
spending most of her time in bed, and not being interested in activities she once enjoyed doing with her kids, such as
going to the park and seeing movies. Her mother and grandfather also showed signs of mental illness and she
reported that her mom has taken Depakote before, which helped. Sarah wants to open her own restaurant and move to
a bigger house.
1. Please answer the following questions by referring to the above case study and the assigned reading for this
unit:
• What psychological and physical symptoms does Sarah present with?
. What is the primary psychological disorder diagnosis that fits her symptoms based on the disorders
described in the textbook?
Answer:
how to deal with devoirce
Explanation:
The psychological and physical symptoms that Sarah presents include:
She frequently has headaches.She also has a loss of appetite.She gets angry easily.From the information given, we can infer that some of the symptoms include the fact that Sarah frequently has headaches, loss of appetite, and gets angry easily.
The primary psychological disorder diagnosis that fits her symptoms based on the disorders will be depression. She's depressed because she just got divorced. This has taken a toll on her health.
Read related link on:
https://brainly.com/question/19276767
Which of these properties of light is a constant?
speed in a vacuum
amplitude
wavelength
frequency
Answer:
speed in vacuum
Explanation:
lets say we are in an empty universe and you are moving 10% the speed of light you wont slow down or speed up.
According to Lenz's law, the current is induced in the closed conducting loop in such a direction that the magnetic field induced by this current opposes the change in the flux through the loop.
a. True
b. False
Answer:
True
Explanation:
It is true that the real definition of lenz's law in magnetism is the current is induced in the closed conducting loop in such a direction that the magnetic field induced by this current opposes the change in the flux through the loop.
This means that induced current opposes the very cause that produces it.
As the Moon revolves around the Earth, it also rotates on its axis. Why is it that the same side of the Moon is always visible from Earth?
Answer: The speed of the moon's rotation keeps the same side always facing Earth.
Explanation: Please mark me brainiest
Answer:
The speed of the Moon's rotation keeps the same side always facing Earth.
Explanation:
got it right on study island :)
A transparent oil with index of refraction 1.15 spills on the surface of water (index of refraction 1.33), producing a maximum of reflection with normally incident violet light (wavelength 400 nm in air). Assuming the maximum occurs in the first order, determine the thickness of the oil slick.
Answer:
The thickness of the oil slick. t = 173.91 nm
Explanation:
Oil film thickness t is given by the equation
[tex]t = \frac{\lambda}{2n}[/tex]
where λ = wavelength of incident light in air = 400 nm
and n = index of refraction of oil
therefore,
[tex]t =\frac{400}{2\times 1.15}\\t= 173.91 nm[/tex]
The thickness of the oil slick. t = 173.91 nm
HELP QUICK! Please can anyone do the other half for me
Answer:
9) c
10) c
11) d
12) d
Explanation:
I think it's helps you
what happen when you take off your clothes very quickly
Answer:
Nothing
Explain
Nothing happenes when you take off your cloths quickly.
Scientificly nothing really happnes.
The surface of the paper is phosphorescent. When light shines on it, some of the energy is absorbed and re-emitted slowly over time. The blue LED causes the surface to glow, but the green LED does not. Would a red LED to cause the surface to glow? Select the best answer from the choices provided. View Available Hint(s) Select the best answer from the choices provided. No Yes
Answer:
No
Explanation:
Recall that the hierarchy of wavelength color from minimum wavelength to maximum wavelength is:
[tex]V < I < B < G < Y < O < R;[/tex] and
[tex]E \ \alpha \ \dfrac{1}{\lambda}[/tex]
As a result, blue light has a higher energy level than green and red light.
As a result, the surface glows due to the blue LED. The green LED, on the other hand, would not allow the surface to glow as much as the red LED, which has a lower energy level when compared to the green light. As a result, the red LED would not allow the surface to glow as well.
please answer this im not sure
Answer:
the answer is B
What does weathering do?
2. What does erosion do?
3. What is physical weathering?
4. what are 3 examples of physical weathering?
5. What is chemical weathering?
6. What are 2 examples of chemical weathering?
7. What is biological weathering?
8. What are 3 examples of biological weathering?
Answer
Weathering describes the breaking down or dissolving of rocks and minerals on the surface of the Earth. Water, ice, acids, salts, plants, animals, and changes in temperature are all agents of weathering. Once a rock has been broken down, a process called erosion transports the bits of rock and mineral away.
Erosion is the geological process in which earthen materials are worn away and transported by natural forces such as wind or water. A similar process, weathering, breaks down or dissolves rock, but does not involve movement.
Physical weathering is caused by the effects of changing temperature on rocks, causing the rock to break apart. The process is sometimes assisted by water. ... Freeze-thaw occurs when water continually seeps into cracks, freezes and expands, eventually breaking the rock apart.
Swiftly moving water. Rapidly moving water can lift, for short periods of time, rocks from the stream bottom. ...
Ice wedging. Ice wedging causes many rocks to break. ...
Plant roots. Plant roots can grow in cracks.
the erosion or disintegration of rocks, building materials, etc., caused by chemical reactions (chiefly with water and substances dissolved in it) rather than by mechanical processes.
Carbonation. When you think of carbonation, think carbon! ...
Oxidation. Oxygen causes oxidation. ... or
Hydration. This isn't the hydration used in your body, but it's similar. ...
Biological weathering is weathering caused by plants and animals. Plants and animals release acid forming chemicals that cause weathering and also contribute to the breaking down of rocks and landforms. Chemical weathering is weathering caused by breaking down of rocks and landforms.
Burrowing animals like shrews, moles, earthworms, and even ants contribute to biological weathering. ...
When animals like birds forage for seeds and earthworms, they create holes and erode the upper surface of the soil, thus, contributes to weathering.
rabbits and other burrowing animals can burrow into a crack in a rock, making it bigger and splitting the rock. You may have seen weeds growing through cracks in the pavement.
Explanation:
Hope this helps you!!
The activity of a radioisotope is found to decrease 40% of its original value in 2.59 x 10 s.
Calculate the decay constant of the radioisotope.
Answer: [tex]0.0353\ s^{-1}[/tex]
Explanation:
Given
Radioactive material is found to decrease 40% of its original value in [tex]2.59\times 10\ s[/tex]
Sample at any time is given by
[tex]N=N_oe^{-\lambda t}[/tex]
where, [tex]\lambda=\text{decay constant}[/tex]
Put values
[tex]\Rightarrow 0.4N_o=N_oe^{-\lambda\cdot 2.59\times 10}\\\Rightarrow 0.4=e^{-\lambda\cdot 2.59\times 10[/tex]
Taking natural logarithm both side
[tex]\Rightarrow \lambda=\dfrac{\ln 2.5}{25.9}\\\\\Rightarrow \lambda =0.0353\ s^{-1}[/tex]
One method for determining the amount of corn in early Native American diets is the stable isotope ratio analysis (SIRA) technique. As corn photosynthesizes, it concentrates the isotope carbon-13, whereas most other plants concentrate carbon-12. Overreliance on corn consumption can then be correlated with certain diseases, because corn lacks the essential amino acid lysine. Archaeologists use a mass spectrometer to separate the 12 C and 13 C isotopes in samples of human remains. Suppose you use a velocity selector to obtain singly ionized (missing one electron) atoms of speed 8.50 km/s, and you want to bend them within a uniform magnetic field in a semicircle of diameter 25.0 cm for the 12 C. The measured masses of these isotopes are 1.99×10−26kg(12C) and 2.16×10−26kg(13C).
(a) What strength of magnetic field is required?
(b) What is the diameter of the 13 C semicircle?
(c) What is the separation of the 12 C and 13 C ions at the detector at the end of the semicircle? Is this distance large enough to be easily observed?
Answer:
[tex]0.0084575\ \text{T}[/tex]
[tex]0.272\ \text{m}[/tex]
2.2 cm easily observable
Explanation:
[tex]m_1[/tex] = Mass of 12 C = [tex]1.99\times 10^{-26}\ \text{kg}[/tex]
[tex]m_2[/tex] = Mass of 13 C = [tex]2.16\times 10^{-26}\ \text{kg}[/tex]
[tex]r_1[/tex] = Radius of 12 C = [tex]\dfrac{25}{2}=12.5\ \text{cm}[/tex]
B = Magnetic field
v = Velocity of atom = 8.5 km/s
[tex]r_2[/tex] = Radius of 13 C
The force balance of the system is
[tex]qvB=\dfrac{m_1v^2}{r}\\\Rightarrow B=\dfrac{m_1v}{rq}\\\Rightarrow B=\dfrac{1.99\times 10^{-26}\times 8500}{12.5\times 10^{-2}\times 1.6\times 10^{-19}}\\\Rightarrow B=0.0084575\ \text{T}[/tex]
The required magnetic field is [tex]0.0084575\ \text{T}[/tex]
Radius is given by
[tex]r=\dfrac{mv}{qB}[/tex]
[tex]r\propto m[/tex]
So
[tex]\dfrac{r_2}{r_1}=\dfrac{m_2}{m_1}\\\Rightarrow r_2=\dfrac{m_2}{m_1}r_1\\\Rightarrow r_2=\dfrac{2.16\times 10^{-26}}{1.99\times 10^{-26}}\times 12.5\times 10^{-2}\\\Rightarrow r_2=0.136\ \text{m}[/tex]
The required diameter is [tex]2\times 0.136=0.272\ \text{m}[/tex]
Separation is given by
[tex]2(r_2-r_1)=2(0.136-0.125)=0.022\ \text{m}[/tex]
The distance of separation is 2.2 cm which is easily observable.
X-rays are electromagnetic waves used to obtain images of bones. An x-ray machine produces x-ray waves with a frequency of 1.25 x 10^18 Hz.
(a) Calculate the time period of these x-rays.
Answer:
[tex]T=8\times 10^{-19}\ s[/tex]
Explanation:
Given that,
The frequency of x-ray is, [tex]f=1.25\times 10^{18}\ Hz[/tex]
We need to find the time period of these x-rays. Let it is be T. We know that, the relation between f and T is given by :
T = 1/f
So,
[tex]T=\dfrac{1}{1.25\times 10^{18}}\\\\=8\times 10^{-19}\ s[/tex]
So, the time period of these x-rays is equal to [tex]8\times 10^{-19}\ s[/tex].
The time period of the electromagnetic wave is 8.0 × 10⁻¹⁹ seconds.
Given the data in the question;
Frequency; [tex]f =1.25 * 10^{18}Hz[/tex]
Time period; [tex]T =\ ?[/tex]
Time period is simply the time taken for one complete cycle of vibration to pass a given point.
It is expressed as:
[tex]T = \frac{1}{f}[/tex]
We substitute our value into the equation
[tex]T = \frac{1}{1.25 * 10^{18}Hz} \\\\T = \frac{1}{1.25 * 10^{18}s^{-1}}\\\\T = 8.0 * 10^{-19}s[/tex]
Therefore, the time period of the electromagnetic wave is 8.0 × 10⁻¹⁹ seconds.
Learn more: https://brainly.com/question/24094163
What is the difference between center of mass and center of gravity?
Answer:
Centre of mass is the point at which the distribution of mass is equal in all directions, and does not depend on gravitational field. Centre of gravity is the point at which the distribution of weight is equal in all directions, and does depend on gravitational field.
Answer:
Centre of mass is the point at which the distribution of mass is equal in all directions, and does not depend on gravitational field.
Centre of gravity is the point at which the distribution of weight is equal in all directions, and does depend on gravitational field.
hope this helps you ☺️☺️
Two vectors have magnitudes 3 and 4 . how are the directions of the two vectors related if: a/the sum has magnitude 7.0
Another word for kinetic energy
could be
energy.
A. Safe
B. Moving
C. Stored
D. Potential
Answer:
moving
Explanation:
hope it helped!!!
Answer:
B
Explanation:
What would the current be for a circuit that has a voltage of 0.8 V and a resistance of 0.01 Q?
0 1 = 0.01 A
0 1 = 0.8 A
0 1 = 80 A
O I = 0.08 A
Answer:
80 A
Explanation:
Hi there!
Ohm's law states that [tex]V=IR[/tex] where V is the voltage, I is the current and R is the resistance.
Plug the given information into Ohm's law (V=0.8, R=0.01) and solve for I
[tex]V=IR\\0.8=I(0.01)[/tex]
Divide both sides by 0.01 to isolate I
[tex]0.8=I(0.01)\\\frac{0.8}{0.01}= \frac{I(0.01)}{0.01} \\80=I[/tex]
Therefore, the current for this circuit would be 80 A.
I hope this helps!
Types of telescope
for Space
observation
Answer:The three main types are reflecting telescopes, refracting telescopes, and catadioptric telescopes. Radio telescopes collect and focus radio waves from distant objects. Space telescopes orbit Earth, collecting wavelengths of light that are normally blocked by the atmosphere.
Answer:
oii me manda mensagem fofo vc tem namorada fofo
Determine the angle between the directions of vector A with rightwards arrow on top = 3.00i + 1.00j and vector B with rightwards arrow on top = -3.00i + 3.00j.
A) 117°
B) 88.1°
C) 26.6°
D) 30.0°
E) 45.2°
Answer:
C) 26.6
Explanation:
I don't know how to calculate vector
The angle between the two vectors is 117⁰
The given parameters;
vector A = 3.00i + 1.00j
vector B = -3.00i + 3.00j
The angle between the two vectors is calculated as follows;
[tex]cos \ \theta = \frac{A\ . \ B}{|A| \ . \ |B|}[/tex]
The dot product of vector A and B is calculated as;
[tex]A \ . \ B = (3i \ + j) \ . \ (-3i \ + 3j) = (3\times -3) + (1 \times 3) = -9 + 3 =- 6[/tex]
The magnitude of vector A and B is calculated as;
[tex]|A| = \sqrt{3^2 + 1^2} = \sqrt{10} \\\\|B| = \sqrt{(-3)^2 + (3)^2} = \sqrt{18}[/tex]
The angle between the two vectors is calculated as;
[tex]cos \ \theta = \frac{-6}{\sqrt{10} \ . \sqrt{18} } \\\\cos \ \theta = \frac{-6}{\sqrt{180} } \\\\cos \ \theta = -0.4472\\\\\theta = cos \ ^{-1} (-0.4472) \\\\\theta = 116.6^0 \approx 117^0[/tex]
Thus, the angle between the two vectors is 117⁰
Learn more here: https://brainly.com/question/15006306
Infrared radiation from young stars can pass through the heavy dust clouds surrounding them, allowing astronomers here on Earth to study the earliest stages of star formation, before a star begins to emit visible light. Suppose an infrared telescope is tuned to detect infrared radiation with a frequency of 1.61THz. Calculate the wavelength of the infrared radiation. Round your answer to 3 significant digits.
Answer:
λ = 1.86 x 10⁻⁴ m = 186 μm
Explanation:
The relationship between the wavelength and the frequency of a wave is given by the following equation:
[tex]c = f\lambda\\\\\lambda = \frac{c}{f}[/tex]
where,
λ = wavelength of infrared radiation = ?
c = speed of infrared radiation = speed of light = 3 x 10⁸ m/s
f = frequency of infrared radiation = 1.61 THz = 1.61 x 10¹² Hz
Therefore,
[tex]\lambda = \frac{3\ x\ 10^8\ m/s}{1.61\ x\ 10^{12}\ Hz}[/tex]
λ = 1.86 x 10⁻⁴ m = 186 μm
In an NMR experiment, the RF source oscillates at 34 MHz and magnetic resonance of the hydrogen atoms in the sample being in- vestigated occurs when the external field Bext has magnitude 0.78 T. Assume that Bint and Bext are in the same direction and take the pro- ton magnetic moment component u, to be 1.41 X 10-26 J/T. What is the magnitude of Bint?
Answer:
[tex]B_{int}=-0.015T[/tex]
Explanation:
From the question we are told that:
RF source oscillation speed [tex]\sigma= 34 MHz[/tex]
The external field [tex]Bext =0.78 T[/tex].
Pro- ton magnetic moment component [tex]\mu=1.41 X 10-26 J/T[/tex]
Generally the equation for magnitude of [tex]B_{int}[/tex] is mathematically given by
[tex]B_{int}=B_{ext}-\frac{h\triangle \sigma}{2 \mu}[/tex]
[tex]B_{int}=0.78-\frac{6.6*10^{-34}*34*10^6}{2*1.41*10^{26}}[/tex]
[tex]B_{int}=0.78-0.7957[/tex]
[tex]B_{int}=-0.015T[/tex]