Answer:
Increase in temperature
Increase in pressure
Explanation:
For the rate of collisions to increase, It can happen in various ways
1. The gasses can be made to move faster: This can be done by increasing their temperature. An increase in the temperature of the gases directly relates to a corresponding increase in their kinetic energy. This means that the molecules of the gases can move with a greater velocity, which will increase collision rates.
2. The volume of the container can be reduced: Consider this; If the container is made smaller, the molecules of the gases will have less space to move about. This means that they will be bumping into the walls of the container more frequently. This reduction in volume leads to an increase in the pressure of the gas. This is exactly what happens in a piston-cylinder assembly
The increase in the rate of collisions between gas molecules in a container should result in Increase in temperature and Increase in pressure
Reasons for increasing the rate of collisions:1. In the case when the gasses should be quick faster, due to this, the temperature should be increased. In this, the gases molecules should be moved have high velocity
2, Here the container volume should be decreased. Due to this, the volume should be decreased that results in the increment of the gas pressure.
Therefore, The increase in the rate of collisions between gas molecules in a container should result in Increase in temperature and Increase in pressure
Learn more about gases here: https://brainly.com/question/24862829
The graph shows the motion of a lift starting at rest and initially moving upwards: What is the acceleration of the lift between 0 and A?
Answer:
0.67 m/s²
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 0 m/s
Final velocity (v) = 2 m/s
Time (t) = 3 secs
Acceleration (a) =?
Acceleration can be defined as the rate of change of velocity with time. It can be represented mathematically as:
Acceleration = change in velocity /time.
a = (v – u) /t
With the above formula, we can calculate the acceleration of the lift as shown below:
Initial velocity (u) = 0 m/s
Final velocity (v) = 2 m/s
Time (t) = 3 secs
Acceleration (a) =?
a = (v – u) /t
a = (2 – 0) /3
a = 2/3
a = 0.67 m/s²
Thus, the acceleration of the lift between 0 and A is 0.67 m/s².
A farmer wants to determine which of two brands of cow feed is best for the cows on a farm. Before using one of the feeds on all the cows, the farmer decides to conduct an experiment using 36 individual cows. Which of the two plans for randomly assigning the treatments should the farmer use? Explain. (4 points) Plan A: Choose the 18 cows that are lowest in weight. Feed Brand K to all 18 of those cows. Feed Brand L to the remaining 18 cows. Plan B: Choose 18 of the 36 cows at random. Feed Brand K to those 18 cows and Brand L to the remaining 18 cows. Plan B, because the sample of cows is randomly chosen Plan A, because the cows that are lowest in weight need the feed the most and should be treated first Plans A and B are equivalent because they both follow experimental design. Plans A and B are both poorly designed because there are not enough cows to test. The plans cannot be evaluated from the information given.
Answer:
Plan B, because the sample of cows is randomly chosen
John has decided he needs to work harder on his Social Studies project. Then, his teacher says if he gets a good grade in Social Studies, he may be eligible for a special scholarship for college. What type of motivation is present here?
a.
Intrinsic
c.
Extrinsic to intrinsic
b.
Extrinsic
d.
Intrinsic to extrinsic
Please select the best answer from the choices provided
A
B
C
D
Answer: Extrinsic to intrinsic
Explanation:
The type of motivation is present here is d. Intrinsic to extrinsic
The following information should be considered:
Intrinsic motivation comprise of performing a task since it's personally rewarding to you. While on the other hand, Extrinsic motivation comprise of finishing a task since of outside causes like avoiding punishment or collecting a reward.Learn more: https://brainly.com/question/1152162?referrer=searchResults
A 1-kg mass is dropped from a third floor window. The acceleration of the mass is found to be 8 m/s2. What is the average force of air resistance? A) 1.8 N B) 7 N C) 8 N D) 9.8 N
1. How should Rick correct his technique?
2. Are these students behaving appropriately? If not, what should they
be doing differently?
the guy on the left is rick , the girl in the middle is sarah, and the guy on the right is Andrew.
Answer:
1) Rick should be taking and gathering the gas with his hand towards his face gently to get just a whiff.
2) These students are doing the complete opposite of what should properly be done. Andrew shouldn't be drinking any chemicals that don't belong in his body. Sarah shouldn't be throwing whatever chemicals into a mixture, this can cause a lot of possible danger. Rick shouldn't be directly smelling the gas which can also be harmful. Rick needs to be wearing gloves and smell the gas in a proper way. Sarah should wear goggles and pay attention to what she is mixing. Andrew should be wearing gloves and goggles and shouldn't be drinking the chemical.
Uncle Fester's CD's
Congratulations, your uncle fester has just willed you his CD collection!!! Using what you know about classification, see if you can arrange these CDs into similar groups to make them easier for your customers to find. Make a list of four groups that these CDs can be classified into.
The rest of the graph looks like this but here are the CD's for group 3 and Group 4.
Group 3
The Beatles
Beyonce
Alicia Keys
Carrie Underwood
Group 4
Bach
Blake Shelton
Beach Boys
Post Malone
I am having trouble with the graph.
Answer: hey
Explanation:
Determine the skater's average velocity from t= os to t= 16s. (average velocity is the displacement (final position minus initial position) divided by time elapsed.)
Answer:
v = 0.5 m/s
Explanation:
The attached figure shows Robin's positions wrt time who is rollerskating down a marked side walk.
We need to find the skater's average velocity from t= os to t= 16s.
Average velocity = displacement/time
Displacement = final postion - initial position
Displacement = (8 - 0) m/s
Displacement = 8 m/s
Time, t = (16 - 0) s
So,
[tex]v=\dfrac{(8-0)\ m}{(16-0)\ s}\\\\v=0.5\ m/s[/tex]
So, the skater's average velocity from t= os to t= 16s is 0.5 m/s.
A ball, initially at rest, reaches a speed of 20 m/s at the bottom of the apparatus. If it takes the ball 10 seconds to reach the bottom, what is the ball’s average acceleration?
Answer:
2 m/s²
Explanation:
Given:
v₀ = 0 m/s
v = 20 m/s
t = 10 s
Find: a
a = (v − v₀) / t
a = (20 m/s − 0 m/s) / 10 s
a = 2 m/s²
What is the average velocity of an object that moves from 7.3 cm to 4.1 cm relative to the origin in 2.5 s
PLEASE HELP ME I DONT WANT TO FAIL
Answer:1 7/25
Explanation:take the total distance7.3-4.1 then divide by the total time taken
The average velocity of the object is equal to -1.28m/s relative to the origin when it moves for 2.4 seconds.
What is average velocity?Average velocity is a vector quantity and is defined as the change in position (∆x) divided by the time intervals (∆t) in which it occurs. The average velocity can be positive or negative and the S.I. unit of average velocity is m/s.
The average velocity of an object = ∆x/∆t
The average velocity of an object involves only the displacement of the object. However, the magnitude of the displacement of an object can be different from the actual path length.
Given, the displacement of the object = final position - initial position
∆x = 4.1 - 7.3 = -3.2m
The time, ∆t = 2.5 - 0 = 2.5 s
The average velocity of the object = ∆x/∆t = -3.2/2.5 = -1.28 m/s
Therefore, the average velocity of the object is -1/28 m/s relative to origin.
Learn more about average velocity, here:
https://brainly.com/question/862972
#SPJ2
A car reversing at -7.2 m/s has a displacement of -21.6 m. How long did this take?
Answer:
Time=distance/velocity
T=S/V
T=(-21.6)/(-7.2)
Time=3seconds
what does it mean to be a base physical quantity
Answer:
Hello! :)
Explanation:
A base quantity (or basic quantity) is chosen and arbitrarily defined, rather than being derived from a combination of other physical quantities. The 7 base quantities are: SI units are used as standardised units in all measurements in the world. SI is the short form for “International System of Units”
Hope This Helps!!!
uses and effects of UV rays?
Answer:
The above pic may help you :)
What is the acceleration of a 2,000 kg truck if it takes a 5,500 N force to move it forward?
Explanation:
Newton's second law:
F = ma
5500 N = (2000 kg) a
a = 2.75 m/s²
A compass taken to Earth's moon does not point in a specific direction on the moon.
What is the most likely reason for the difference between how the compass works on Earth and on the moon?
A) The moon lacks an atmosphere.
B) The moon contains no rocks that have iron.
C) The moon does not have a strong magnetic field.
D) The moon has no bodies of water.
Answer:
C.
Explanation:
The moon does not have a strong magnetic field. This is the most likely reason for the difference between how the compass works on Earth and on the moon. Hence option C is correct.
What is magnetic field ?The magnetic impact on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetic field acts on it while the charge is travelling through a magnetic field The magnetic field of a permanent magnet pulls on ferromagnetic substances like iron and attracts or repels other magnets. Paramagnetism, diamagnetism, and antiferromagnetism are three additional magnetic effects that a nonuniform magnetic field may have on "nonmagnetic" materials, albeit these forces are often so minute that they can only be detected by laboratory equipment. Electric currents, such those utilised in electromagnets, and electric fields that change in time produce magnetic fields that surround magnetised objects.
To know more about Magnetic Field :
https://brainly.com/question/14848188
#SPJ5.
20 POINTS! ANSWER CORRECTLY FOR BRAINLIEST!
Which of these is a similarity between a polar and a subtropical jet stream?
A. Both are formed at latitudes close to the poles.
B. Both are formed at latitudes close to the equator.
C. Both are formed at the boundary of warm and cool air masses.
(D not included because I know for a fact it is incorrect, I honestly think the answer is C but I just want other peoples opinions)
Answer:
C, Both are formed at the boundary of warm and cool air masses.
Answer:
c
Explanation:
Which accident will be more damaging, collision between two trucks
moving with a speed 50 km/hr or collision between two cars moving with a speed of 50 km/hr? Explain.
Answer:
collision between truck
Explanation:
Answer. Collision between trucks, because more is the mass, more is the inertia and therefore more is the momentum. Mass of the trucks is more than that of cars so collision of trucks will cause more damage.
Which of the following is a common ground water contaminant
A.ozone
B.nuclear waste
C.carbon monoxide
D.fertilizers
Physical Science is the study of
Answer:
Physical science is the study of the inorganic world. That is, it does not study living things. (Those are studied in biological, or life, science.) The four main branches of physical science are astronomy, physics, chemistry, and the Earth sciences, which include meteorology and geology.
Explanation:
household chores are a good way to fit exercise into your everyday ruotine
Answer:TRUE
Explanation:
It’s counts as moving around so yes exercise
hey can anyone help me out in dis
Answer:
A) moving randomly
B) collide into each other
D) high kinetic energy
Explanation:
Gas particles move very fast (high kinetic energy) and in unpredictable directions (moving randomly). They also collide into each other.
I hope this helps! If it does, a Thanks or brainliest would be much appreciated :)
a car drives at 88 km/h over a distance of 22 kilometers calculate in minutes the time taken for the audi to travel this distance
V=88 km/h d=22km t=? if d/t=V t=d/V t=22km/88km/h
t=0,25h
t=1500min
i hope this helps
One way to decrease acceleration is to
a. increase mass
b. decrease mass
c. decrease force and mass equally
d. increase force more than mass
A race car accelerates from 0 m/s to 20.0 m/s with a displacement of 35.0 m. What is the vehicle's acceleration?
a 5.7 m/s2
b .84 m/s2
c 6.1 m/s2
d .29 m/s2
Explanation:
Using Equations of Motion :
[tex] {v}^{2} = {u}^{2} + 2as[/tex]
[tex]a = \frac{{v}^{2} - {u}^{2}}{2s} = \frac{400 - 0}{70} = 5.71msec^{ - 2} [/tex]
Martin Luther King, Jr., was awarded the Noble Peace Prize * Yes No
Answer
Explanation:
duh he was fighting for peace half of his life
What did Belgium do to the congo?
Answer:
They killed 10 million people and registered it as a colony
Explanation:
Brainliest helps
how many significant figures are in the number 347,000
Answer:
there are 3 significant figures.
Explanation:
significant figures are 3,4,7.
Which ball has the greater acceleration at the instant of release?
Ball thrown upward or downward
They're equal.
Ignoring air resistance, any object you're not holding onto has the same, constant acceleration ... 9.8 m/s^2 down ... from the moment it leaves your hand until the moment it hits the ground.
It doesn't matter how heavy the object is, and it doesn't matter whether you throw it up, down, or sideways, or just let go and let it drop.
What is the average of 255, 242, 245?
Answer:
The average is 247.33 if it is for the whole number then it is 247
Explanation:
I did it by adding it all together and dividing it by 3
Answer:
247.33 is the average.
Explanation:
To find the average of a set of numbers:
a. add them up.
b. divide by how many numbers there are.
SO:
a. 255 + 242 + 245 = 742.
b. 742 (total) divided by 3 (# of numbers) = 742/3 = 247.33.
Hope this helps!
Convert 540 cg= ____ Hg
function of alcohol in alcohol thermometer
Alcohol is increasingly expanding with heat. Having it go up the ladder quicker than a lot of liquids would have done. It has a low freezing point, too. It's easy to dye because of the readability. I 'm sure someone will teach you about the evaporative effects of alcohol, and why they do these things. Though that's why it's used briefly in thermometers.
Answer:
Fahrenheit's first thermometer contained alcohol, which has a lower freezing point than water. ... Glass bulb thermometers work because liquids, such as water, alcohol, or mercury, expand slightly when the temperature rises. If the liquid is trapped in a narrow tube, it has nowhere to go but up. I think this may help you