Two objects gravitationally attract with force of 1,926N. If mass 1is multiplied by 0.38,mass2 is multiplied by 3.21, and the distance is multiplied by 2.25,the new force of attraction is:

Answers

Answer 1

The new force of attraction is found to be  813.25 N.

How do we calculate?

We that F_ = G * (m1 * m2) / r²

F_ = force of gravitational attraction,

G = gravitational constant =  [tex]6.67430 * 10^-^1^1[/tex]N(m/kg)²

m1 and m2 =  masses of the two objects, and

r = distance between the centers of the two objects.

new mass = 0.38 * m1

new mass  = 3.21 * m2_o

new distance = 2.25 *  r

new force = F  * (m1 * m2) / (m1 * m2) * (r² / r²)

new force= 1926 N * (0.38 * m1_original * 3.21 * m2_original) / (m1_original * m2_original) * (r_original²/ (2.25 * r_original)²)

new force = 1926 N * 0.38 * 3.21 / (2.25²)

new force  = 813.25 N

Learn more about force at:

https://brainly.com/question/12970081

#SPJ1


Related Questions

What is the wavelength of the standing wave?
Choose 1 answer:

Answers

From the image, the option that we should choose is option F; None of these.

What is the wavelength?

The distance between two consecutive points that are in phase or have the same displacement and are situated on either side of a standing wave is referred to as its wavelength. In other words, it represents the duration of a single wave cycle.

The length of the medium and the boundary conditions influence the wavelength for a standing wave on a string or in a medium.

Since we do not have the difference between two crests and troughs hence the answer ought to be none of these.

Learn more about wavelength:https://brainly.com/question/31143857

#SPJ1

What is the difference between classical mechanics and quantum mechanics?

Answers

Classical mechanics describes the motion of objects on a macroscopic scale, while quantum mechanics deals with the behavior of particles on a microscopic scale. Classical mechanics is deterministic, meaning that it predicts precise outcomes based on initial conditions, while quantum mechanics is probabilistic, providing probabilities of different outcomes. Classical mechanics follows the principle of causality, where every effect has a specific cause, whereas quantum mechanics introduces inherent uncertainty and wave-particle duality. Classical mechanics is well-suited for describing everyday objects, while quantum mechanics is necessary to explain the behavior of particles at the atomic and subatomic levels.

~~~Harsha~~~

the main difference between classical mechanics and quantum mechanics lies in how they describe the behavior of objects.

classical mechanics is the branch of physics that deals with the motion of everyday objects like balls, cars, and planets.

quantum mechanics is a branch of physics that focuses on the behavior of very small particles, such as atoms and subatomic particles like electrons.

If the parallel circuit had 23 amps with the same resistance, what will be the voltage

Answers

If the parallel circuit had 23 amps with the same resistance, the voltage will be V = 23 amps * R.

To determine the voltage in a parallel circuit with a given current and resistance, we can use Ohm's Law, which states that the voltage (V) is equal to the current (I) multiplied by the resistance (R).

In this case, if the parallel circuit has a current of 23 amps and the same resistance as before, we can use the same resistance value as before to calculate the voltage.

Ohm's Law equation: V = I * R

Given:

Current, I = 23 amps

Resistance, R (same as before)

Substituting the values into the equation, we have:

V = 23 amps * R

Therefore, The specific value of resistance (R) is not provided in the question, so the voltage (V) cannot be determined without knowing the resistance value. If the resistance value is provided, you can substitute it into the equation to calculate the voltage.

To learn more about Ohm's Law click:

brainly.com/question/1247379

#SPJ1

How does uplift change the surface of Earth?

Answer options with 4 options
A.
Snow melts on the surface of Earth, causing rivers to form.

B.
Magma rises from the surface of Earth, causing lava beds to form.

C.
Wind blows across the surface of Earth, causing sand dunes to form.

D.
Pressure builds under the surface of Earth, causing mountains to form.

Answers

Pressure builds under the surface of Earth, causing mountains to form.The correct answer is option D.

Uplift refers to the geological process that elevates the Earth's surface, resulting in the formation of mountains. This process is primarily driven by tectonic forces, including the movement and collision of Earth's lithospheric plates.

When two plates converge, immense pressure builds up beneath the surface, causing the crust to buckle and fold. This deformation leads to the formation of mountains, as rocks are pushed upward and displaced vertically.

As the uplift process continues over millions of years, mountains gradually take shape. Erosion and weathering play significant roles in shaping their features, but it is the initial uplift that initiates the formation of mountains.

As the Earth's surface is elevated, a wide range of landforms can emerge, including rugged peaks, deep valleys, and steep slopes.

Uplift has a profound impact on the Earth's surface and ecosystems. Mountains alter local climates, influencing precipitation patterns and creating variations in temperature and wind patterns.

Therefore, uplift plays a crucial role in shaping the Earth's surface and influencing various geological, biological, and climatic processes.

For more such questions on mountains,click on

https://brainly.com/question/31199320

#SPJ8

Which of the following is true at the point where you reach the top of your jump on a trampoline?

The mechanical energy is zero
he potential energy is at maximum
The kinetic energy and potential energy are equal.
The potential energy is zero.

Answers

The potential energy is at the maximum when you reach the top of your jump on a trampoline. The correct answer is option B.

What is Potential Energy

Potential Energy is the type of energy an object possesses by virtue of its position relative to others, stresses within itself, electric charge, and other factors. Potential energy exists in various forms, including gravitational potential energy, elastic potential energy, chemical potential energy, and electrical potential energy.

This type of energy can be converted into another type of energies. Examples, a charged battery has potential energy and it can be used as electrical potential energy. Petrol, diesel and and gas have chemical potential energy and be used as kinetic energy.

Learn More about potential energy here

https://brainly.com/question/14427111

#SPJ1

Determine the energy released per kilogram of fuel used.
Given MeV per reaction, calculate energy in joules per kilogram of reactants.
Consider 1 mile of tritium plus 1 mole of deuterium to be a mole of "reactions" ( total molar mass = 5 grams)

Answers

The energy released per kilogram of fuel used is 3.39 * 1014 J/Kg

Why is the energy released in a reaction?

Energy is released in a reaction because of  the breaking of bonds are well as formation of bonds.

The quantity of energy released in reactions differs according to the reaction type involved.

The energy released in nuclear reactions are far larger than that released in chemical reactions due to the release of nuclear energy from the nucleus.

The energy, E released in nuclear reactions is given by the formula below:

Energy per kilogram of reactants (in joules) = Energy per mole of reactants (in joules) / Total molar mass of reactants (in kg)

Energy per kilogram of reactants (in joules)  = [tex]1.60218 x 10^-^1^3 joules[/tex] /  5 grams

Energy per kilogram of reactants (in joules)   =  3.39 * 1014 J/Kg

Learn more about nuclear reactions at:

brainly.com/question/984564

#SPJ1

The energy released per kilogram of fuel used is 5.632 × 10^-14 J/kg.

5 grammes, 0.005 kilogrammes, of reactants are provided.

Since 1 mile of tritium and 1 mile of deuterium are equal to 1 mole of "reactions," the sum of the "reactions" in 0.005 kilogrammes of reactants may be computed as follows:

Total moles of "reactions" in 0.005 kg of reactants = (0.005 kg / 5 g/mol)                            

                                                                                     = 0.001 mole.

The MeV per reaction must now be multiplied by the total number of "reactions" in order to get the total energy released by the "reactions."

Next, the energy must be converted from MeV to Joules.

MeV to Joules conversion factor is 1.6 10-13 J/MeV.

Total energy released = (MeV per reaction) x (number of reactions) x (conversion factor)

Total energy released = (17.6 MeV/reaction) x (0.001 mole) x (1.6 × 10^-13 J/MeV)

Total energy released = 2.816 × 10^-16 J

The total energy released by the "reactions" is 2.816 × 10^-16 J.

To determine the energy released per kilogram of fuel used, we need to divide the total energy by the mass of fuel used.

Total energy released per kilogram of fuel used = (total energy released) / (mass of fuel used)

Total energy released per kilogram of fuel used = (2.816 × 10^-16 J) / (0.005 kg)

Total energy released per kilogram of fuel used = 5.632 × 10^-14 J/kg

Therefore, the energy released per kilogram of fuel used is 5.632 × 10^-14 J/kg.

For such more questions on energy

https://brainly.com/question/31425468

#SPJ8

A circle loop of radius 2 m is positioned in a uniform magnetic field of magnitude 1.5 N/C so that the plane of the loop makes an angle of 65° with the magnetic field. Find the flux passing through the circle loop.

Answers

The flux through the circle loop of wire is determined as 7.96 N/C.m².

What is the flux passing through the circle loop?

The flux through the circle loop of wire is calculated by applying the following formula.

Ф = EA cosθ

where;

B is the magnitude of the electric  fieldA is the area of the circular loopθ is the direction of the loop

The area of the wire is calculated as follows;

A = πr²

A = π (2 m)²

A = 12.57 m²

The flux through the circle loop of wire is calculated as;

Ф = EA cosθ

Ф = 1.5 x 12.57 x cos (65)

Ф = 7.96 N/C.m²

Learn more about flux here: https://brainly.com/question/26289097

#SPJ1

How does the authors word choice when describing the wolves impact tone of the passages?

Answers

However, based on the given options, the most appropriate choice would be:

B. It creates a neutral tone.

How tones inmapct passage

A neutral tone suggests that the author's word choice does not lean towards a specific emotional or judgmental stance. Instead, the author presents information about the wolves objectively, without exaggerated or dramatic language.

This choice implies that the author's word choice does not evoke a surreal, realistic, or patronizing tone, but rather maintains a balanced and impartial tone.

Read more on writing tone here:https://brainly.com/question/819739

#SPJ1

An Eagar resident is driving down the road late at night at a velocity of 14 m/s. Suddenly an elk runs out in front of the car and the driver slams on the brakes. If the car comes to a stop (velocity final = 0 m/s) in 32 m, what is the acceleration of the car?

Answers

The acceleration of the car is approximately -3.06 m/s^2.

To find the acceleration of the car, we can use the kinematic equation:

v^2 = u^2 + 2as

Where:

v = final velocity = 0 m/s

u = initial velocity = 14 m/s

a = acceleration (to be determined)

s = displacement = 32 m

Plugging in the values into the equation, we can solve for acceleration:

0^2 = 14^2 + 2a(32)

Simplifying:

0 = 196 + 64a

Rearranging the equation:

64a = -196

Dividing both sides by 64:

a = -196/64

a ≈ -3.06 m/s^2

This means that every second, the car's velocity decreases by 3.06 meters per second. The negative sign indicates that the acceleration is in the opposite direction of the initial velocity, opposing the car's motion and bringing it to a stop.

For such more questions on acceleration

https://brainly.com/question/460763

#SPJ8

Which of the following is a vector quantity
weight
temperature
acceleration
distance

Answers

Answer:

weight, acceleration

Explanation:

weight = mass x gravity(meaning the direction of the mass)

acceleration = v-u/t

v-u is the change in velocity

A string of length

LL vibrates to form a standing wave with two antinodes as shown below.

Answers

The wavelength of the standing wave is 2L. Option B

What is the wavelength of a standing wave with one antinode?

The wavelength of a standing wave with a single antinode is equal to the distance between the antinodes next to it. The wave's highest displacement occurs at the antinodes.

The wavelength () of the standing wave can be expressed as follows if we refer to the separation between neighboring antinodes as d:

λ = 2L

Therefore, the wavelength of a standing wave with a single antinode is equal to double the distance between adjacent antinodes.

Learn more about standing wave:https://brainly.com/question/14176146

#SPJ1

Other Questions
Which of the following represents the electron configuration of a silver atom, and the electron configuration of silver ion, respectively? Select one: a. [Ar] 5s2 4d and [Kr] 5s" 4d9 b. [Ne] 3s 3p2 and [Ne] 3s 3p2 O C. [Kr] 5s 4010 and [Kr] 4d10, respectively O d. [Ar] 5s 4d10 and [Ar] 582 4d9 O e. [Kr] 5s 4d and [Kr] 5s2 4d Jeremy can buy two tacos at 75 cents each and a medium drink for $1.00or a "value meal" with three tacos and a medium drink for $3. For him, the marginal cost of the third taco would be?A. 0B. $0.75C. $1.00D. $0.50 assume the sample space s = {oranges, grapes}. select the choice that fulfills the requirements of the definition of probability. This question is about discrete Fourier transform of the pointsequencee=1f=2g=4h=5please help me to solve it step-by-stepA 5. Find the Discrete Fourier transform of the four-point sequence {e, f, g, h} (Note: Replace e, f, g, h with any numbers of your MEC ID number and e, f, g, h> 0) Suppose n is a positive integer, and let a. a2.....an be real numbers such that a < a2 < .. < an. Let (-[infinity], a) denote the set { IR x < a}. Obtain a formula for the set {r RR : (x-a)(x-a2) (xan) < } using the notation for intervals. find u, v , u , v , and d(u, v) for the given inner product defined on rn. u = (1, 0, 2, 1), v = (0, 2, 1, 1), u, v = u v Use (a) Fixed Point Iteration method (b) Newton-Rhapson method and (c) Secant Method to find the solution to the following within error of 10-6. Show your manual solution for first three iterations, then prepare an Excel file for the finding the root until the error is within 10-6 showing also the graph of the function.1. x3-2x2-5=0, when x = [1, 4]2. sin x - e-x=0, when x = [0,1]3. (x-2)2-ln x =0, when x = [1,2] the point 1,3 lies on the graph of and the slope of the tangent line thru this point is m =2 a patient with lung cancer is ordered oxygen therapy at home. the patient tells the nurse a son who is a smoker lives in the home. which is the best response for the nurse to use when teaching the patient? 56) IS - (2x+5) equal to -2x+5? Is x+2(a+b) equal to (x+2)(a+b)? Enter 1 for yes or o for no in order. ans: 2 An upright cylindrical tank with radius 7 m is being filled with water at a rate of 4 m3/min. How fast is the height of the water increasing? (Round the answer to four decimal places.) TRUE / FALSE. The contract between the seller and the buyer calls for the shipment of 10,000 yards +/-5% of fabric. The buyer's letter of credit indicates that the seller is to ship 10,000 yards, +/- 5%. When the seller submits documents, the opening bank notices that the invoice and packing list show shipment of 10,600 yards. The bank considers this a discrepancy. Details In a certain state, 77% of adults have been vaccinated. Suppose a random sample of 8 adults from the state is chosen. Find the probability that at least 7 in the sample are vaccinated. 0.581 0.369 0.419 0.705 0.295 Submit Question Question 10 4 pts 1 Details The amount of time in minutes needed for college students to complete a certain test is normally distributed with mean 34.6 and standard deviation 7.2. Find the probability that a randomly chosen student will require between 30 and 40 minutes to complete the test. 0.2890 0.9177 0.5123 0.7389 0.6103 Which one of the following statements is incorrect?a.When petty cash is embezzled at the branch, the branch inventory account is credited, and the branch expense account debited.b.Where inventory is invoice to branch at cost price, the mark-down on sales does not require any entries in the books.c.In certain circumstances, the branch inventory account serves the same purpose as the normal trading account.d.The cost price of inventory that cannot be found is credited to the branch inventory account and debited to the branch expenses account. 1 (a) List FOUR objectives of benefits programs. i ii ii iv b) Define the meaning of benefits. C) Define the meaning of pay for performance. D) what are the purposes of pay for performance. i ii iii Complete the passages comparing the oxidative photosynthetic carbon cycle, also called photorespiration, with the mitochondrial rexpiration that drives ATP synthesis. Mitochondrial respiration and photorespiration are both referred to as respiration because both processes In the plant cell, mitochondrial respiration takes place During mitochondrial respiration, electrons derived from the carriers in the membrane to O pass through a chain of In the plant cell, the process of photorespiration takes place in the pass through a chain of During mitochondrial respiration, electrons derived from the carriers in the membrane to O In the plant cell, the process of photorespiration takes place in the during the when carbon fixation is occurring. Photorespiration results from the which produces 3.phosphoglycerate and 2-phosphoglycolate. The 2-phosphoglycolate enters the glycolate pathway, an energetically costly process that converts 2.phosphoglycolate to the final product, This side reaction of photosynthesis in the reaction catalyzed by glycolic acid oxidase. Name them please, I really need the answer as soon as possible From the following information, prepare a Flexible budget of David & Co. Ltd. $. Direct materials 90,000 Factory costs (80% fixed) 12,000 Direct Labour 60,000 Admn. costs (60% fixed) 18,000 Direct cost 30,000 Sales costs (50% fixed) 6,000 Machinery expenses 15,000 Sales at Rs. 3 per unit 3,00,000 Power 15,000 Total Production is sold in the year. Further, the factory is working at 60% capacity. You have to assume the following. (a) Direct materials and wages Increase by 10% and 5% followings (b) Capacity will be 80% 4. Price elasticity of new supply-how do we measure it (exercise)? a) Hedging, forward pricing, options1 How will you use these to mitigate your risk?b) Contracting2 Will you use production or marketing contracting to reduce risk?c) Insurance3 How will you use crop, liability and other insurance?