Unsaturated, saturated, or supersaturated?

Explanation:

2 moles of lead oxide ->

2PbO2 -> 2PbO + O2

Answer:

3

Explanation:

3 is the answer is did this a little while ago

Answer: 15 L of [tex]N_2[/tex] gas will have same numer of molecules as 15L of [tex]CO_2[/tex] gas at the same temperature and pressure,

Explanation:

According to avogadro's law, equal moles of gases occupy equal volume at same conditions of temperature and pressure.

[tex]\text{Number of moles}=\frac{\text{Given volume}}{\text{Molar volume}}[/tex]

[tex]\text{Number of moles of} CO_2=\frac{15L}{22.4L/mol}=0.67mol[/tex]

[tex]1 mole of CO_2[/tex] contains=[tex]6.022\times 10^{23}[/tex]  molecules of [tex]CO_2[/tex]  

Thus 0.67 moles of [tex]CO_2[/tex] contains=[tex]\frac{6.022\times 10^{23}}{1}\times 0.67=4.03\times 10^{23}[/tex] molecules

Now molecules of [tex]N_2[/tex] = molecules of [tex]CO_2[/tex] = [tex]4.03\times 10^{23}[/tex]

[tex]6.023\times 10^{23}[/tex] molecules of [tex]N_2[/tex]  = 22.4 L

Now [tex]4.03\times 10^{23}[/tex]  molecules of [tex]N_2[/tex] = [tex]\frac{22.4}{6.023\times 10^{23}}\times 4.03\times 10^{23}=15L[/tex]

Answer: The final temperature of the system will be [tex]13.14^0C[/tex]

Explanation:

[tex]heat_{absorbed}=heat_{released}[/tex]

As we know that,  

[tex]Q=m\times c\times \Delta T=m\times c\times (T_{final}-T_{initial})[/tex]

[tex]m_1\times c_1\times (T_{final}-T_1)=-[m_2\times c_2\times (T_{final}-T_2)][/tex]         .................(1)

where,

q = heat absorbed or released

[tex]m_1[/tex] = mass of steam = 25 g

[tex]m_2[/tex] = mass of water = 0.2384 kg = 238.4 g   (1kg=1000g)

[tex]T_{final}[/tex] = final temperature = ?

[tex]T_1[/tex] = temperature of steam = [tex]116^oC[/tex]

[tex]T_2[/tex] = temperature of water = [tex]8^oC[/tex]

[tex]c_1[/tex] = specific heat of steam = [tex]1.996J/g^0C[/tex]

[tex]c_2[/tex] = specific heat of water= [tex]4.184J/g^0C[/tex]

Now put all the given values in equation (1), we get

[tex]25g\times 1.996J/g^0C\times (T_{final}-116)=-[238.4g\times 4.184J/g^0C\times (T_{final}-8)][/tex]

[tex]T_{final}=13.14^0C[/tex]

Therefore, the final temperature of the system will be [tex]13.14^0C[/tex]

Answer: This is a typical acid/base equilibrium problem, that involves the use of logarithms.

Explanation:We assume that both nitric acid and hydrochloric acid dissociate to give stoichiometric

H

3

O

+

.

Moles of nitric acid:

26.0

×

10

−

3

⋅

L

×

8.00

⋅

m

o

l

⋅

L

−

1

=

0.208

⋅

m

o

l

H

N

O

3

(

a

q

)

.

And, moles of hydrochloric acid:

88.0

×

10

−

3

⋅

L

×

5.00

⋅

m

o

l

⋅

L

−

1

=

0.440

⋅

m

o

l

H

C

l

(

a

q

)

.

This molar quantity is diluted to

1.00

L

. Concentration in moles/Litre =

(

0.208

+

0.440

)

⋅

m

o

l

1

L

=

0.648

⋅

m

o

l

⋅

L

−

1

.

Now we know that water undergoes autoprotolysis:

H

2

O

(

l

)

⇌

H

+

+

O

H

−

. This is another equilibrium reaction, and the ion product

[

H

+

]

[

O

H

−

]

=

K

w

. This constant,

K

w

=

10

−

14

at

298

K

.

So

[

H

+

]

=

0.648

⋅

m

o

l

⋅

L

−

1

;

[

O

H

−

]

=

K

w

[

H

+

]

=

10

−

14

0.648

=

?

?

p

H

=

−

log

10

[

H

+

]

=

−

log

10

(

0.648

)

=

?

?

Alternatively, we know further that

p

H

+

p

O

H

=

14

. Once you have

p

H

,

p

O

H

is easy to find. Take the antilogarithm of this to get

[

O

H

−

]

.

Answer link  

Answer:

1.05 atm

It should be 1 atm = 760 mm; therefore, 798 mm x (1 atm/760) = about 1.05 atm.

The value of pressure in atm that would be equal to 798 mmHg is 1.05 atmospheric.

Pressure is a physical quantity or a kind of force which is perpendicularly applied on the surface area of any object so that force is equally distributed on that surface.

Pressure will be maesured by various unit and have relation with one another.

As we know that, 1 atm = 760 mmHg

Or 1 mmHg = 1/760atm

Given quantity of pressure is 798 mmHg and we calculate this quantity by multiply this value by 1/760 and we get,

798 mmHg = 798mmHg × 1/760atm/mmHg = 1.05 atm

Hence required value of pressure is 1.05 atm.

To know more about pressure units, visit the below link:

https://brainly.com/question/17386864

Answer:

1.44 g

Explanation:

The problem gives you the molarity and volume of the target solution, so right from the start you know that you can use that information to determine the number of moles of hydrochloric acid that it must contain.

So, molarity measures a solution's concentration in terms of how many moles of solute, which in your case is hydrochloric acid, you get per liter of solution.

A

0.158 M

hydrochloric acid solution contains

0.158

moles of hydrochloric acid for very liter of solution. Since you're dealing with

250 mL

, the equivalent of

1

4

th

of a liter, your solution will contain

250

mL

⋅

1

L

10

3

mL

⋅

0.158 moles HCl

1

L

=

0.0395 moles HCl

Now that you know how many moles of hydrochloric acid are needed to prepare your solution, use the compound's molar mass to convert this to grams

0.0395

moles HCl

⋅

36.46 g

1

mole HCl

=

∣

∣

∣

∣

¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

a

a

1.44 g

a

a

∣

∣

−−−−−−−−−−

Explanation:

Please  brainliest.

Answer:

[tex][C_6H_{12}O_6][/tex]

Explanation:

Hello there!

In this case, since the concept of solution concentration is majorly used in terms of moles per liters of solution or molarity (M), it is also possible to represent this chemical unit by using squared brackets, [ ].

In such a way, when focused on the concentration of glucose, C6H12O6, we can use:

[tex][C_6H_{12}O_6][/tex]

Best regards!

Answer:

The white stuff we know as sugar is sucrose, a molecule composed of 12 atoms of carbon, 22 atoms of hydrogen, and 11 atoms of oxygen (C12H22O11). Like all compounds made from these three elements, sugar is a carbohydrate

Answer:

5.83 M

Explanation:

3.5 M * 125.0 ml  =  M₂ * 75.0ml

437.5 M.ml = M₂ * 75.0 ml

M₂ = 437.5 M.ml / 75.0 ml

M₂ = 5.83 M

Answer: Energy = 10000J - 2000J = 8000J

Therefore, the energy is dissipated the skier moves down to the slope is 8000J

Explanation:

Answer:

B. Carry oxygen, nutrients, waste, & to fight pathogens

Explanation:

The circulatory system refers to all organs and tissues involved in carrying blood and lymph around the body.

The circulatory system carries oxygenated blood from the heart to cells and  deoxygenated blood back to the heart.

Nutrients are carried in the blood to cells in different parts of the body and waste products are also carried from cells in the blood.

White blood cells is a component of blood in the circulatory system that fights off diseases.

Explanation:

HOPE IT HELPS

THANKS

Answer:

pH = 10.75

Explanation:

To solve this problem, we must find the molarity of [OH⁻]. With the molarity we can find the pOH = -log[OH⁻]

Using the equation:

pH = 14 - pOH

We can find the pH of the solution.

The molarity of Ca(OH)₂ is 2.8x10⁻⁴M, as there are 2 moles of OH⁻ in 1 mole of Ca(OH)₂, the molarity of [OH⁻] is 2*2.8x10⁻⁴M = 5.6x10⁻⁴M

pOH is

pOH = -log 5.6x10⁻⁴M

pOH = 3.25

pH = 14-pOH

Answer:

solid=(s)

Explanation:

A solubility table may be something your class may want you to memorize. Where an aqueous (aq) solution is formed by a soluble compound dissolving in water, our solvent. So if we refer to this solubility table, it says phosphate (PO4) is usually insoluble, so in the reaction it won't break down in water and will stay as a solid (s). The only exceptions are group 1 alkali metals or ammonium (NH4+).

The expected outcome of carrying out this step as planned is :

B. The resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.

The expected outcome of carrying out this step as planned is the resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.

pH may be a degree of how acidic/basic water is.

The run goes from - 14, with 7 being unbiased. pHs of less than 7 demonstrate causticity, while a pH of more noteworthy than 7 demonstrates a base.

pH is truly a degree of the relative amount of free hydrogen and hydroxyl particles within the water

Thus, the correct answer is B.

Learn more about "Acids":

https://brainly.com/question/6872943?referrer=searchResults

Answer:

Your answer will be C. 1/32

Answer:

C. 1/32

Explanation:

Answer:

pH = 1.522

Explanation:

HCl + H20 -> Cl^(-) + H30^(+)

0.03M ____ ____

____ 0.03M 0.03M

[H30^(+)] = 0.03M

pH = - log([H30^(+)])

pH = - log( 0.03)

pH = 2 - log3

pH = 2- 0.47

pH = 1.522

The pH of the hydrogen chloride, HCl solution having a concentration of 0.03 M is 1.52

This is simply a measure of the acidity / alkalinity of a solution.

The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration

Dissociation equation

HCl(aq) —> H⁺(aq) + Cl¯(aq)

From the balanced equation above,

1 mole of HCl contains 1 mole of H⁺.

Therefore,

0.03 M HCl will also contain 0.03 M H⁺

pH = –Log H⁺

pH = –Log 0.03

pH = 1.52

Learn more about pH:

https://brainly.com/question/3709867

Answer:

Check your toilet for leaks. ...

Stop using your toilet as an ashtray or wastebasket. ...

Put a plastic bottle in your toilet tank. ...

Take shorter showers. ...

Install water-saving shower heads or flow restrictors. ...

Take baths. ...

Turn off the water while brushing your teeth. ...

Turn off the water while shaving.

Explanation:

Answer:

keeping the water clean

Explanation:

avoid dumping rubish in the water

yes use the masses of an element below calculate the mass of it 8.70 mole of each 3M

Explanation:

(a) a functional group is a special group of atoms or bonds in a compound that is responsible for the chemical reactions, behavior, and characteristics of that compound. (b) Functional group is present in both the compound is alcohol (-OH).

Functional groups are specific groupings of atoms within molecules that have their own characteristic properties, regardless of the other atoms present in a molecule. Common examples are alcohols, amines, carboxylic acids, ketones, and ethers.

Key Points

Functional groups are often used to “functionalize” a compound, affording it different physical and chemical properties than it would have in its original form.

Functional groups will undergo the same type of reactions regardless of the compound of which they are a part; however, the presence of certain functional groups within close proximity can limit reactivity.

Functional groups can be used to distinguish similar compounds from each other.

Key Terms

functional group: A specific grouping of elements that is characteristic of a class of compounds, and determines some properties and reactions of that class.

functionalization: Addition of specific functional groups to afford the compound new, desirable properties.

Answer: it should be 80g

Explanation:

Answer:

Expof HCl are required to produce 7.50 moles of ZnCl2? 6. Copper ... When 9.34 g of zinc react with excess hydrochloric acid how many grams of zinc chloride will.lanation:

Answer:

combustion is fast and destructive it also involves a lot of movement of the atoms where erosion is a slow process that does not involve a lot of energy

Answer:

Endothermic

Explanation:

An endothermic reaction is one in which energy is absorbed while an exothermic reaction is one in which energy is given out(evolved).

If we look at the reaction as written; 3C(graphite) + 3H2(g) + 88kcal -------> C3H8(g), we will notice that;

i) 88kcal of energy had to be absorbed for the reaction to occur

ii) The enthalpy change for the reaction is positive.

Since energy must be taken in to drive the forward reaction, then the reaction is endothermic as written.

Answer:

607.9616 grams

Explanation:

Hope this helped!!

Answer:

The concentration of the 3.2 g of sodium chloride in 8 dm³ of water is 6.845 × 10⁻³ M

Explanation:

The concentration of a solution is given as either the ratio of mass to volume, or the ratio of volume to volume or as molarity

[tex]Concentration, C = \dfrac{Mass}{Volume} = \dfrac{Volume}{Volume} = \dfrac{Number \ of \ moles }{Liters \ of \ solution}[/tex]

The number of moles present in 3.2 g of sodium chloride, 'n', is given as follows;

[tex]n = \dfrac{Mass}{Molar \ mass}[/tex]

The molar mass of sodium chloride, NaCl = 58.44 g/mol

n = 3.2 g/58.44 g/mol = 0.0547570157 moles

8 dm³ = 8 Liters

Therefore, the concentration, C = 0.0547570157 moles/(8 liters) = 6.845 × 10⁻³ M

The concentration of the 3.2 g of sodium chloride in 8 dm³ of water = 6.845 × 10⁻³ Molar solution.