Answer:
Phosphorus
Explanation:
If you add up all the electrons (the exponents) it equals 15 which is the atomic number of phosphorus. And since stable atoms have the same number of protons and electrons it'll be phosphorus
Please help me with this chem question. Only answer if you know it.
Answer:
solid=(s)
Explanation:
A solubility table may be something your class may want you to memorize. Where an aqueous (aq) solution is formed by a soluble compound dissolving in water, our solvent. So if we refer to this solubility table, it says phosphate (PO4) is usually insoluble, so in the reaction it won't break down in water and will stay as a solid (s). The only exceptions are group 1 alkali metals or ammonium (NH4+).
2. Can you say that the matter which underwent a chemical change is still the
same substance as before? Why?
Answer:
No
Explanation:
A chemical change is a change that involves a change in the chemical composition of matter. A new substance is formed. In a chemical change, new chemical and physical properties of the substance are formed. In a chemical change, the chemical and physical properties of the substance formed will be different from the original substance.
The matter which underwent a chemical change is not still the same substance as before.
What is Chemical change?This is the type of change which occurs when two substances known as reactants react to form a new product.
The formation of a new product through bonding and other parameters thereby makes the substance to be different as it was before.
Read more about Chemical change here https://brainly.com/question/11987405
What other small steps can we take to save water ?
Answer:
Check your toilet for leaks. ...
Stop using your toilet as an ashtray or wastebasket. ...
Put a plastic bottle in your toilet tank. ...
Take shorter showers. ...
Install water-saving shower heads or flow restrictors. ...
Take baths. ...
Turn off the water while brushing your teeth. ...
Turn off the water while shaving.
Explanation:
Answer:
keeping the water clean
Explanation:
avoid dumping rubish in the water
25 g of 116oC steam are bubbled into 0.2384 kg of water at 8oC. Find the final temperature of the system.
Answer: The final temperature of the system will be [tex]13.14^0C[/tex]
Explanation:
[tex]heat_{absorbed}=heat_{released}[/tex]
As we know that,
[tex]Q=m\times c\times \Delta T=m\times c\times (T_{final}-T_{initial})[/tex]
[tex]m_1\times c_1\times (T_{final}-T_1)=-[m_2\times c_2\times (T_{final}-T_2)][/tex] .................(1)
where,
q = heat absorbed or released
[tex]m_1[/tex] = mass of steam = 25 g
[tex]m_2[/tex] = mass of water = 0.2384 kg = 238.4 g (1kg=1000g)
[tex]T_{final}[/tex] = final temperature = ?
[tex]T_1[/tex] = temperature of steam = [tex]116^oC[/tex]
[tex]T_2[/tex] = temperature of water = [tex]8^oC[/tex]
[tex]c_1[/tex] = specific heat of steam = [tex]1.996J/g^0C[/tex]
[tex]c_2[/tex] = specific heat of water= [tex]4.184J/g^0C[/tex]
Now put all the given values in equation (1), we get
[tex]25g\times 1.996J/g^0C\times (T_{final}-116)=-[238.4g\times 4.184J/g^0C\times (T_{final}-8)][/tex]
[tex]T_{final}=13.14^0C[/tex]
Therefore, the final temperature of the system will be [tex]13.14^0C[/tex]
An inherited behavior or physical characteristics that helps an organism survive and reproduce Natural selection Predation Adaptation Competition
look at pic thanks :D
Answer:
it's natural selection
Explanation:
adaptation is when you adapt to some situation
Use the masses of the elements below to calculate the mass of 8.70 moles of H3M (the number at the bottom of
each square is the atomic mass of that element)
1
2
3
4
5
6
A
H
C
B
M
Sm
aragon
hillsdale
capuchino
mills
burlingame
san mateo
1.10
3.50
7.09
11.22
15.23
18.98
Given:
Wanted
Relationship: 1 mole H3M =
grams
Final answer
grams
yes use the masses of an element below calculate the mass of it 8.70 mole of each 3M
Determine the AMOUNT OF NO2, LIMITING REACTANT, AND THE AMOUNT AND NAME OF EXCESS REACTANT.
10.00 g of O2 reacts with 20.00 g NO
The molar masses of O2, NO, and NO2 are 32.00 g/mol, 30.01 g/mol, and 46.01 g/mol, respectively
Answer:
balanced equation mole ratio 5 2 mol NO/1 mol O2
10.00 g O2 3 1 mol O2/32.00 g O2 5 0.3125 mol O2
20.00 g NO 3 1 mol NO/30.01 g NO 5 0.6664 mol NO
actual mole ratio 5 0.6664 mol NO/0.3125 mol O2 5 2.132 mol NO/1.000 mol O2
Because the actual mole ratio of NO:O2 is larger than the balanced equation mole
ratio of NO:O2, there is an excess of NO; O2 is the limiting reactant.
Mass of NO used 5 0.3125 mol O2 3 2 mol NO/1 mol O2 5 0.6250 mol NO
0.6250 mol NO 3 30.01 g NO/1 mol NO 5 18.76 g NO
Mass of NO2 produced 5 0.6250 mol NO2 3 46.01 g NO2/1 mol NO2 5 28.76 g NO2
Excess NO 5 20.00 g NO 2 18.76 g NO 5 1.24 g N
Explanation:
What volume will 1000 grams of nitrogen dioxide occupy at 380 mmHg at 0°C
0.69(78)Explanation:
Explain the laboratory preparation of hydrogen
Answer:
laboratory preparation off Hydrogen: Hydrogen is prepared in the laboratory by the action of the dilute hydrochloric acid or dilute sulphuric acid on granulated zinc. Use of Granulated Zinc Granulated zinc contains an impurity like copper which acts as a positive catalyyst.
Explanation:
Hope this helps!
how many total atoms are there is a sugar molecule
Answer:
The white stuff we know as sugar is sucrose, a molecule composed of 12 atoms of carbon, 22 atoms of hydrogen, and 11 atoms of oxygen (C12H22O11). Like all compounds made from these three elements, sugar is a carbohydrate
Dinitrogen oxide (N2O) gas was generated from the thermal decomposition of ammonium nitrate and collected over water. The wet gas occupied 123 mL at 21◦C when the atmospheric pressure was 760 Torr. What volume would the same amount of dry dinitrogen oxide have occupied if collected at 760 Torr and 21 ◦C? The vapor pressure of water is 18.65 Torr at 21◦C. Answer in units of mL.
Answer:
119.98 mL
Explanation:
Initial volume V1 = 123 ml
Initial temperature = T1 = 21◦C + 273 = 294 K
Initial pressure P1 = 760 Torr - 18.65 Torr = 741.35 Torr
Final volume V2= ???
Final temperature = T2= 21◦C + 273 = 294 K
Final pressure P2 = 760 Torr
From;
P1V1/T1= P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2= 741.35 * 123 * 294/760 * 294
V2 = 119.98 mL
FREE BRAINLIEST!!!!! You have two objects. One is hot the other is cold (lack of heat). In what direction does the heat want to travel?
Answer:
the heat wants to travel up. Heat rises
Explanation:
Draw or sketch something that you might see move. Write a caption that answers the following questions: How would you describe its motion? Is it moving at a constant speed, or does it speed up and slow down?
Answer:
lets say your doing a frog
it jumps it speeds up and then slows down
Explanation:
A functional group is a specific arrangement of atoms in an organic compound that is acmpavle if characteristic reactions
Is this True or false
Does not having the word (chemical )before reactions make it false
Please help i would appreciate it
Explanation:
(a) a functional group is a special group of atoms or bonds in a compound that is responsible for the chemical reactions, behavior, and characteristics of that compound. (b) Functional group is present in both the compound is alcohol (-OH).
Functional groups are specific groupings of atoms within molecules that have their own characteristic properties, regardless of the other atoms present in a molecule. Common examples are alcohols, amines, carboxylic acids, ketones, and ethers.
Key Points
Functional groups are often used to “functionalize” a compound, affording it different physical and chemical properties than it would have in its original form.
Functional groups will undergo the same type of reactions regardless of the compound of which they are a part; however, the presence of certain functional groups within close proximity can limit reactivity.
Functional groups can be used to distinguish similar compounds from each other.
Key Terms
functional group: A specific grouping of elements that is characteristic of a class of compounds, and determines some properties and reactions of that class.
functionalization: Addition of specific functional groups to afford the compound new, desirable properties.
How long does cream of tartar activate
Use the scenario to answer the following question.
A group of students working in a chemistry lab is planning a procedure to neutralize 25.0mL of 2.0 M hydrochloric acid (strong acid) with 1.0 M potassium hydroxide (strong base). In their procedure they plan on adding an equal volume of the base to the acid.
What would be the expected outcome of carrying out this step as planned?
A.
The resulting pH will be equal to 7 because a strong base will neutralize a strong acid.
B.
The resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
C.
The resulting pH will be greater than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
D.
The resulting pH will not be able to be determined because the concentrations of the acid and base are not the same.
The expected outcome of carrying out this step as planned is :
B. The resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
Acid and basesThe expected outcome of carrying out this step as planned is the resulting pH will be less than 7 because potassium hydroxide is less concentrated than the hydrochloric acid.
pH may be a degree of how acidic/basic water is.
The run goes from - 14, with 7 being unbiased. pHs of less than 7 demonstrate causticity, while a pH of more noteworthy than 7 demonstrates a base.
pH is truly a degree of the relative amount of free hydrogen and hydroxyl particles within the water
Thus, the correct answer is B.
Learn more about "Acids":
https://brainly.com/question/6872943?referrer=searchResults
How many grams of HCL are needed to make 500.0 mL of a 0.100 M solution?
Answer:
1.44 g
Explanation:
The problem gives you the molarity and volume of the target solution, so right from the start you know that you can use that information to determine the number of moles of hydrochloric acid that it must contain.
So, molarity measures a solution's concentration in terms of how many moles of solute, which in your case is hydrochloric acid, you get per liter of solution.
A
0.158 M
hydrochloric acid solution contains
0.158
moles of hydrochloric acid for very liter of solution. Since you're dealing with
250 mL
, the equivalent of
1
4
th
of a liter, your solution will contain
250
mL
⋅
1
L
10
3
mL
⋅
0.158 moles HCl
1
L
=
0.0395 moles HCl
Now that you know how many moles of hydrochloric acid are needed to prepare your solution, use the compound's molar mass to convert this to grams
0.0395
moles HCl
⋅
36.46 g
1
mole HCl
=
∣
∣
∣
∣
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
a
a
1.44 g
a
a
∣
∣
−−−−−−−−−−
Explanation:
Please brainliest.
AH for the reaction
IF5 (g) → IF3 (g) + F2 (g)
kJ, give the data below.
IF (8) + F2 (g) → IF3 (8)
IF (g) + 2F2(8) ► F5 (8)
AH=-390 kJ
AH=-745 kJ
A) -1135
B) +35
C) +1135
D) -35
E) +355
Answer:
E) +355 kJ
Explanation:
Based on Hess's law, it is possible to obtain ΔH of a reaction from the sum of similar reactions:
(1) IF(g) + F2(g) → IF3(g) ΔH = -390kJ
(2) IF(g) + 2F2(g) → IF5(g) ΔH = -745kJ
The sum of (1) - (2) is:
IF(g) + F2(g) → IF3(g)
IF5(g) → IF(g) + 2F2(g)
_________________
IF5(g) → IF3(g) + F2(g)
ΔH = -390kJ - (-745kJ)
ΔH = +355kJ
Right answer is:
E) +355 kJhow many moles of aluminum are produced from 4.9 moles of lithium?
Answer:
2.95078 × 10^23
hope this helps you ☺️☺️
1. What is the function of the circulatory system? * 10 points A. Provide blood with oxygen from the air, & to get rid of carbon dioxide B. Carry oxygen, nutrients, waste, & to fight pathogens C. Secrete hormones to regulate the body and maintain homeostasis D. Produce red blood cells, white blood cells, & platelets
Answer:
B. Carry oxygen, nutrients, waste, & to fight pathogens
Explanation:
The circulatory system refers to all organs and tissues involved in carrying blood and lymph around the body.
The circulatory system carries oxygenated blood from the heart to cells and deoxygenated blood back to the heart.
Nutrients are carried in the blood to cells in different parts of the body and waste products are also carried from cells in the blood.
White blood cells is a component of blood in the circulatory system that fights off diseases.
I didn’t study for this lol if your answer correct I’ll mark ur answer brainliest
Answer:
3
Explanation:
3 is the answer is did this a little while ago
Need help on this question asap pleasee
No links
Answer:
Endothermic
Explanation:
An endothermic reaction is one in which energy is absorbed while an exothermic reaction is one in which energy is given out(evolved).
If we look at the reaction as written; 3C(graphite) + 3H2(g) + 88kcal -------> C3H8(g), we will notice that;
i) 88kcal of energy had to be absorbed for the reaction to occur
ii) The enthalpy change for the reaction is positive.
Since energy must be taken in to drive the forward reaction, then the reaction is endothermic as written.
How many grams are in 4.00 moles of Cr2O3?
Answer:
607.9616 grams
Explanation:
Hope this helped!!
it takes 125.0ml of 3.5M hydrobromic acid to neutralize 75.0ml of lithium hydroxide. what is the concentration of lithium hydroxide
Answer:
5.83 M
Explanation:
3.5 M * 125.0 ml = M₂ * 75.0ml
437.5 M.ml = M₂ * 75.0 ml
M₂ = 437.5 M.ml / 75.0 ml
M₂ = 5.83 M
How many liters of water do we need to add to 5.00 moles to get a 0.648 M solution?
Answer: This is a typical acid/base equilibrium problem, that involves the use of logarithms.
Explanation:We assume that both nitric acid and hydrochloric acid dissociate to give stoichiometric
H
3
O
+
.
Moles of nitric acid:
26.0
×
10
−
3
⋅
L
×
8.00
⋅
m
o
l
⋅
L
−
1
=
0.208
⋅
m
o
l
H
N
O
3
(
a
q
)
.
And, moles of hydrochloric acid:
88.0
×
10
−
3
⋅
L
×
5.00
⋅
m
o
l
⋅
L
−
1
=
0.440
⋅
m
o
l
H
C
l
(
a
q
)
.
This molar quantity is diluted to
1.00
L
. Concentration in moles/Litre =
(
0.208
+
0.440
)
⋅
m
o
l
1
L
=
0.648
⋅
m
o
l
⋅
L
−
1
.
Now we know that water undergoes autoprotolysis:
H
2
O
(
l
)
⇌
H
+
+
O
H
−
. This is another equilibrium reaction, and the ion product
[
H
+
]
[
O
H
−
]
=
K
w
. This constant,
K
w
=
10
−
14
at
298
K
.
So
[
H
+
]
=
0.648
⋅
m
o
l
⋅
L
−
1
;
[
O
H
−
]
=
K
w
[
H
+
]
=
10
−
14
0.648
=
?
?
p
H
=
−
log
10
[
H
+
]
=
−
log
10
(
0.648
)
=
?
?
Alternatively, we know further that
p
H
+
p
O
H
=
14
. Once you have
p
H
,
p
O
H
is easy to find. Take the antilogarithm of this to get
[
O
H
−
]
.
Answer link
Balance the following reactions:
1. PbO2 → PbO + O2
Explanation:
2 moles of lead oxide ->
2PbO2 -> 2PbO + O2
What pressure, in atm, would be equal to 798 mmHg?
Answer:
1.05 atm
It should be 1 atm = 760 mm; therefore, 798 mm x (1 atm/760) = about 1.05 atm.
The value of pressure in atm that would be equal to 798 mmHg is 1.05 atmospheric.
What is pressure?Pressure is a physical quantity or a kind of force which is perpendicularly applied on the surface area of any object so that force is equally distributed on that surface.
Pressure will be maesured by various unit and have relation with one another.
As we know that, 1 atm = 760 mmHg
Or 1 mmHg = 1/760atm
Given quantity of pressure is 798 mmHg and we calculate this quantity by multiply this value by 1/760 and we get,
798 mmHg = 798mmHg × 1/760atm/mmHg = 1.05 atm
Hence required value of pressure is 1.05 atm.
To know more about pressure units, visit the below link:
https://brainly.com/question/17386864
The concentration of C6H12O6 may be represented as (C6H12O6) {C6H12O6} [C6H12O6]
Answer:
[tex][C_6H_{12}O_6][/tex]
Explanation:
Hello there!
In this case, since the concept of solution concentration is majorly used in terms of moles per liters of solution or molarity (M), it is also possible to represent this chemical unit by using squared brackets, [ ].
In such a way, when focused on the concentration of glucose, C6H12O6, we can use:
[tex][C_6H_{12}O_6][/tex]
Best regards!
science helpppppppppppppppppppppppppppppppp
Answer: it should be 80g
Explanation:
What’s an easy way to learn to convert metric numbers? Help plz
Explanation:
HOPE IT HELPS
THANKS