The pH of the solution where 50.0 mL of 0.050 M NH3 (Kb = 1.8 * 10-5) is mixed with 12.0 mL of 0.10 M hydrobromic acid (HBr) is 5.57.
The pH of a solution where 50.0 ml of 0.050 M NH3 (Kb = 1.8 * 10-5) is mixed with 12.0 ml of 0.10 M hydrobromic acid (HBr) can be calculated as follows:
Step 1: Write the balanced chemical equationNH3(aq) + HBr(aq) → NH4Br(aq)Step 2: Find moles of NH3 and HBrMoles of NH3 = (50.0 mL)(0.050 mol/L) = 0.0025 molMoles of HBr = (12.0 mL)(0.10 mol/L) = 0.0012 mol
Step 3: Determine which of the two reagents will run out firstNH3(aq) is a weak base and HBr(aq) is a strong acid, so they will react to form NH4+ and Br- ions. But HBr(aq) will completely dissociate in water while NH3(aq) will undergo a partial ionization. Thus, HBr will be the limiting reactant and all of the 0.0012 mol of HBr will react with 0.0012 mol of NH3 to produce NH4Br.
Step 4: Calculate moles of remaining NH3Moles of NH3 left = 0.0025 mol - 0.0012 mol = 0.0013 mol
Step 5: Calculate concentration of NH4+ ionConcentration of NH4+ ion, [NH4+] = moles of NH4+ ion/volume of solutionMoles of NH4+ ion = moles of HBr used = 0.0012 molVolume of solution = 50.0 mL + 12.0 mL = 62.0 mL = 0.062 L[NH4+] = 0.0012 mol/0.062 L = 0.019 mol/L
Step 6: Write the equilibrium equation and expression for NH4+ ionNH4+(aq) + H2O(l) ⇌ H3O+(aq) + NH3(aq)Kb = [H3O+][NH3]/[NH4+]
Since Kb is given, we can find the Kb for NH4+ ion as follows:Kb * Kw/Ka = [H3O+][NH3]/[NH4+]1.8 * 10^-5 * 1.0 * 10^-14/5.6 * 10^-10 = [H3O+][0.0013]/[0.019][H3O+] = 2.7 * 10^-6pH = -log[H3O+]pH = -log(2.7 * 10^-6)pH = 5.57.
The pH of the solution where 50.0 mL of 0.050 M NH3 (Kb = 1.8 * 10-5) is mixed with 12.0 mL of 0.10 M hydrobromic acid (HBr) is 5.57.
To learn more about solution visit;
https://brainly.com/question/1616939
#SPJ11
5. which solvent would you order if you determined that a sample required a more polar solvent than what is available above? explain.
The solvent that would be ordered if a sample required a more polar solvent than what is available above is Ethanol.
When there is a need for a more polar solvent than those that are already available, ethanol is ordered.
Ethanol is a polar solvent, meaning it is a solvent that has a positive and a negative end to its molecule, so it is effective in dissolving polar compounds.
Ethanol is widely used as a solvent in various applications, including the extraction of plant materials and as a preservative in medicinal and personal care products.
The summary of the explanation is that Ethanol is a polar solvent that can be ordered when a more polar solvent is required than those that are already available.
Learn more about Ethanol click here:
https://brainly.com/question/20814130
#SPJ11
What is the molar concentration of Na+ ions in 0.0400 M solutions of the following sodium salts in water? NaBr Na2SO4 Na3PO4
The molar concentration of Na+ ions in 0.0400 M solutions of NaBr, Na₂SO₄, and Na₃PO₄ are 0.0400 M, 0.0800 M, and 0.120 M, respectively.
The molar concentration of Na+ ions in 0.0400 M solutions of NaBr, Na₂SO₄, and Na₃PO₄ can be calculated as follows: NaBr: NaBr is a salt composed of sodium ions (Na⁺) and bromide ions (Br⁻). When it dissolves in water, it dissociates into Na⁺ and Br⁻ ions.
The molar mass of NaBr is 102.89 g/mol. The molar mass of Na⁺ is 22.99 g/mol. Therefore, the molar concentration of Na+ ions in a 0.0400 M solution of NaBr can be calculated as follows: Concentration of NaBr = 0.0400 M
Concentration of Na⁺ = (1 mol Na⁺ / 1 mol NaBr) × (0.0400 M NaBr) = 0.0400 M × (1 mol Na⁺ / 1 mol NaBr) = 0.0400 M × (1 / 1) = 0.0400 M Na₂SO₄: Na₂SO₄ is a salt composed of sodium ions (Na⁺) and sulfate ions (SO₄²⁻ ). When it dissolves in water, it dissociates into Na⁺ and SO₄²⁻ ions.
The molar mass of Na₂SO₄ is 142.04 g/mol. The molar mass of Na⁺ is 22.99 g/mol. Therefore, the molar concentration of Na⁺ ions in a 0.0400 M solution of Na₂SO₄ can be calculated as follows: Concentration of Na₂SO₄ = 0.0400 M Concentration of Na⁺ = (2 mol Na⁺ / 1 mol Na₂SO₄) × (0.0400 M Na₂SO₄) = 0.0400 M × (2 mol Na⁺ / 1 mol Na₂SO₄) = 0.0800 M Na₃PO₄: Na₃PO₄ is a salt composed of sodium ions (Na⁺) and phosphate ions (PO₄³⁻). When it dissolves in water, it dissociates into Na⁺ and PO₄³⁻ ions.
The molar mass of Na₃PO₄ is 163.94 g/mol. The molar mass of Na⁺ is 22.99 g/mol. Therefore, the molar concentration of Na⁺ ions in a 0.0400 M solution of Na₃PO₄ can be calculated as follows: Concentration of Na₃PO₄ = 0.0400 M Concentration of Na⁺ = (3 mol Na⁺ / 1 mol Na₃PO₄) × (0.0400 M Na₃PO₄) = 0.0400 M × (3 mol Na+ / 1 mol Na₃PO₄) = 0.120 M.
Therefore, the molar concentration of Na⁺ ions in 0.0400 M solutions of NaBr, Na₂SO₄, and Na₃PO₄ are 0.0400 M, 0.0800 M, and 0.120 M, respectively.
To know more about molar concentration, refer
https://brainly.com/question/26255204
#SPJ11
pt A reaction has an enthalpy change of -54 kJ and an activation energy of 89 kJ. What is the enthalpy change of the reverse reaction?
A. -54 kJ
B. 54 kJ
C. -89 kJ
D. 89 kJ
In this case, the forward reaction has an enthalpy change of -54 kJ. Option A
The enthalpy change of the reverse reaction can be determined by applying Hess's law, which states that the enthalpy change of a reverse reaction is equal in magnitude but opposite in sign to the forward reaction. In this case, the forward reaction has an enthalpy change of -54 kJ.
Therefore, the enthalpy change of the reverse reaction is +54 kJ (positive because it is the opposite sign of the forward reaction). This means that the reverse reaction is endothermic, absorbing energy from the surroundings rather than releasing it.
So, the correct answer is B. 54 kJ. The enthalpy change of the reverse reaction is positive 54 kJ. It is important to note that activation energy does not affect the enthalpy change of a reaction. Activation energy is the energy barrier that must be overcome for a reaction to occur, but it does not determine the magnitude or sign of the enthalpy change. Option A is correct.
For more such questions on enthalpy change visit:
https://brainly.com/question/14047927
#SPJ8
what is the concentration of cadmium ions (cd2 ) in a saturated solution of cadmium carbonate (caco3) at 298 k? ksp = 5.20 × 10−12
The concentration of cadmium ions (Cd2+) in a saturated solution of cadmium carbonate (CdCO3) at 298K can be found using the solubility product Ksp expression.
Ksp is the Solubility Product Constant which can be used to determine the solubility of a sparingly soluble salt such as CdCO3. The Ksp expression for CdCO3 is given as:Ksp =[tex] [Cd^{2+}][CO3^{2-}] [/tex]where, [Cd2+] is the concentration of Cd2+ ions and [CO32-] is the concentration of carbonate ions.
The balanced chemical equation for the dissolution of CdCO3 is given as:CdCO3(s) ⇌ Cd^{2+}(aq) + CO3^{2-}(aq)From the balanced equation, the mole ratio of CdCO3 to Cd2+ ions is 1:1. Hence, at saturation, the concentration of Cd2+ ions is equal to the solubility of CdCO3. Let the solubility of CdCO3 be S. Then, [Cd2+] = S.
Substituting these values in the Ksp expression, we get:5.20 × 10^{-12} = S^2Solving for S, we get:S = 7.22 x 10^-6 MTherefore, the concentration of Cd2+ ions in a saturated solution of CdCO3 at 298K is 7.22 x 10^-6 M.
For more information on solubility product kindly visit to
https://brainly.com/question/1419865
#SPJ11
the rotation of a double bond is restricted, so geometric or cis/trans isomers can be formed.
The statement “the rotation of a double bond is restricted, so geometric or cis/trans isomers can be formed” is true. In the organic chemistry field, geometric or cis/trans isomers refer to a type of stereoisomerism. The double bond is one of the most vital functional groups found in organic compounds.
Its presence often indicates chemical reactivity and it can significantly impact the physical properties of compounds with its restricted rotation around its axis. It restricts the rotation because of the presence of a double bond, which has a higher degree of electron density than the single bonds found in saturated hydrocarbons. This bond has been found to repel electron-rich groups or atoms on opposite sides of the double bond.
Due to these restrictions in the rotation of the double bond, geometric isomers can form. These isomers are also known as cis-trans isomers. These isomers arise from the restricted rotation of substituent groups surrounding a double bond, resulting in the molecule having two or more arrangements that are mirror images of each other. The isomers are named “cis” and “trans” to differentiate between them.
To know more about cis/trans isomers, refer
https://brainly.com/question/30640902
#SPJ11
the compound na2e2f8 (where e is an element) has a formula mass of approximately 394 g/mol. what is the atomic mass of e? (atomic mass of na = 23 amu, f = 19 amu). enter your answer as a whole number.
It is given the compound Na₂E₂F₈ (where e is an element) has a formula mass of approximately 394 g/mol. The atomic mass of E is calculated as 98 g/mol.
Given that : compound is Na₂E₂F₈ , Formula mass of Na₂E₂F₈ is approximately 394 g/mol. We know, Atomic mass of Na is 23 amu, Atomic mass of F is 19 amu.
Atomic mass of Na₂E₂F₈ can be calculated as: mass of 2 Na + mass of 2E + mass of 8 F = formula mass of Na₂E₂F₈ (2 × 23 amu) + (2 × atomic mass of E) + (8 × 19 amu) = 394 g/mol46 amu + 2 × atomic mass of E + 152 amu = 394 g/mol2 × atomic mass of E = 196 g/mol
Atomic mass of E = 98 g/mol.
So, the atomic mass of E is 98 g/mol.
To know more about atomic mass, refer
https://brainly.com/question/3187640
#SPJ11
which one of the following compounds has the highest boiling point? group of answer choices ? a. CH 3 CH 2 CH 2 CH 2 Cl b. H2O1 C. CO2 H3
the boiling point of a compound depends on its intermolecular forces, with stronger forces requiring more energy to break apart and reach the boiling point.
The compound with the highest boiling point is H2O (water).
This is because water molecules have strong hydrogen bonds between them, which requires a lot of energy to break apart and reach the boiling point. CH3CH2CH2CH2Cl has a lower boiling point than water because it has weaker intermolecular forces (dipole-dipole forces) compared to the hydrogen bonds in water. CO2 has the lowest boiling point because it is a nonpolar molecule with weak dispersion forces.
In summary, the boiling point of a compound depends on its intermolecular forces, with stronger forces requiring more energy to break apart and reach the boiling point.
To know more about boiling point visit :-
https://brainly.com/question/40140
#SPJ11
The compound with the highest boiling point among the given options is C4H10.
C₂H₆ < C3H8 < C4H10. All of these compounds are nonpolar and only have London dispersion forces: the larger the molecule, the larger the dispersion forces and the higher the boiling point. The ordering from lowest to highest boiling point is therefore C2H6 < C3H8 < C4H10.
Learn more about Boiling point here:https://brainly.com/question/34261956
#SPJ6
Devise a detailed mechanism for formation of the major product of the elimination reaction below. OH H2SO4 Draw curved arrows to show electron reorganization for the mechanism step below. Make the ends of your arrows specify the origin and destination of reorganizing electrons. Arrow-pushing Instructions nnox 0; you mohl — H -ö—s—OH
The elimination reaction between OH and H2SO4 results in the formation of the major product, water. The mechanism for this reaction involves the removal of a proton from the OH group, forming a carbocation intermediate. The adjacent H2SO4 molecule then acts as a base, removing the beta-proton from the carbocation and leading to the formation of water and the sulfate ion.
To illustrate this mechanism using arrow-pushing, we can start by drawing a curved arrow from the lone pair of electrons on the oxygen atom in OH towards the hydrogen atom bonded to the adjacent carbon. This represents the removal of the proton and formation of the carbocation intermediate. We can then draw another curved arrow from the sulfur atom in H2SO4 towards the carbon atom adjacent to the carbocation, representing the removal of the beta-proton and formation of the double bond between the carbon and the oxygen atom. Finally, we can draw another curved arrow from the lone pair of electrons on the oxygen atom towards the hydrogen atom in the H2SO4 molecule, resulting in the formation of water and the sulfate ion.
Overall, the elimination reaction between OH and H2SO4 is a simple yet important reaction in organic chemistry, and understanding the mechanism and arrow-pushing involved can help students grasp the underlying concepts and principles of this process.
To know more about elimination reaction visit :
https://brainly.com/question/32196758
#SPJ11
classify each species as a lewis acid or a lewis base. drag the appropriate items to their respective bins. resethelp
Lewis acid and Lewis base Lewis acid and Lewis base are terms used in chemistry. It was introduced by G.N. Lewis to explain chemical bonding. Lewis acid and Lewis base according to the given table is as follows-|C6H5COO-|Lewis base|BF3|Lewis acid|NH3|Lewis base|H+|Lewis acid|H2O|Lewis base.
A Lewis acid is a substance that accepts an electron pair, whereas a Lewis base is a substance that donates an electron pair. According to Lewis, the electrons are used in chemical bonding. Lewis acids and bases are commonly used in chemical reactions. It's important to know which one is an acid and which one is a base in order to predict the product of a chemical reaction. To answer the question, it is necessary to classify each species as a Lewis acid or a Lewis base. For this, we will have to understand each one of them, which is given below: Lewis AcidA Lewis acid is an electron pair acceptor. It is a substance that can increase the electron-deficient sites on a molecule. It is, therefore, a substance that is capable of accepting an electron pair. For example, hydrogen ion (H+) or protons are Lewis acids. Lewis BaseA Lewis base is an electron pair donor. It is a substance that donates its electrons to another molecule that has a greater affinity for it. It is, therefore, a substance that is capable of donating an electron pair. For example, water (H2O) or ammonia (NH3) are Lewis bases. Now, let's classify each species as a Lewis acid or a Lewis base according to the given table. We need to drag the appropriate items to their respective bins. Here is the table-|C6H5COO-|Lewis acidLewis base|BF3|Lewis acidLewis base|NH3|Lewis acidLewis base|H+|Lewis acidLewis base|H2O|Lewis acidLewis base the classification of the species as Lewis acid and Lewis base according to the given table is as follows-|C6H5COO-|Lewis base|BF3|Lewis acid|NH3|Lewis base|H+|Lewis acid|H2O|Lewis base.
To Know more about Lewis acid visit:
brainly.com/question/15103003
#SPJ11
14 Hydrogen and iodine can react reversibly to produce hydrogen iodide. The equation is shown.
H₂(g) + 12(g) 2HI(g)
4.00 mol of hydrogen gas and Xmol of iodine vapour are mixed in a sealed container of volume
1.00 dm³ at a temperature of 460 K. The system is allowed to reach equilibrium.
The equilibrium mixture contains 2.00 mol of hydrogen iodide. The equilibrium constant, Kc, for
the reaction at 460 K is 4.0.
What is the value of X?
A 0.50 mol
B 1.17 mol
C 1.33 mol
D 2.50 mol
The concentration of the iodine at equilibrium from the calculation is 5.33 M
What is the equilibrium constant?
The equilibrium constant allows for the prediction of the direction in which a reaction will proceed to establish equilibrium when concentrations or pressures of reactants and products change.
We know that;
H₂(g) + [tex]I_{2}[/tex](g) ⇄2HI(g)
I 4 m 0
C -x -x +2x
E 4 - x m - x 2
It the follows that;
2x = 2
x = 1
Then equilibrium concentration of hydrogen = 3 M
Thus we have that;
4 = 3 * [ [tex]I_{2}[/tex]]/[tex]2^2[/tex]
16 = 3 * [ [tex]I_{2}[/tex]]
[ [tex]I_{2}[/tex]] = 5.33 M
Learn more about equilibrium constant:https://brainly.com/question/28559466
#SPJ1
use standard enthalpies of formation to calculate δh∘rxn for the following reaction: cao cao3
The value of ΔH°rxn for the given reaction CaO + CO2 → CaCO3 is -178.4 kJ/mol.
The standard enthalpy of formation (ΔH°f) is the heat energy evolved or absorbed when one mole of a compound is formed from its constituent elements in their standard states under standard conditions.
ΔH°rxn = ∑ΔH°f(products) - ∑ΔH°f(reactants)Given reaction:CaO(s) + CO2(g) → CaCO3(s)
The standard enthalpy of formation of CaO (s) is - 635.1 kJ/mol
The standard enthalpy of formation of CO2 (g) is - 393.5 kJ/mol
The standard enthalpy of formation of CaCO3 (s) is -1207.0 kJ/molNow,ΔH°rxn =
∑ΔH°f(products) - ∑ΔH°f(reactants)= ΔH°f (CaCO3) - [ΔH°f (CaO) + ΔH°f (CO2)]
= [-1207.0 kJ/mol] - [-635.1 kJ/mol - 393.5 kJ/mol]= -1207.0 kJ/mol + 1028.6 kJ/mol= -178.4 kJ/molMAIN ANSWER:ΔH°rxn = -178.4 kJ/mol
The standard enthalpy of formation is used to calculate the heat energy that is absorbed or evolved when one mole of a compound is formed from its elements in their standard states under standard conditions. We have been given a chemical reaction, and we are required to calculate the ΔH°rxn. The standard enthalpies of formation of CaO (s), CO2 (g), and CaCO3 (s) were given, and we have to substitute these values in the formula to get the final answer.
By adding the sum of the standard enthalpies of formation of the products to the sum of the standard enthalpies of formation of the reactants, we obtain the ΔH°rxn. In this reaction, the ΔH°rxn is -178.4 kJ/mol.
Therefore, the value of ΔH°rxn for the given reaction CaO + CO2 → CaCO3 is -178.4 kJ/mol.
To know more about standard enthalpy visit:
brainly.com/question/28303513
#SPJ11
suppose an assassin uses abrin, a translation inhibitor, to poison her victim. place the events in chronological order, starting from the poisoning and ending with the death of the victim.
The sequence of events, starting from the poisoning and concluding with the death of the victim, is described.
The following are the events that occur after the poisoning:1. Abrin is a toxin that inhibits protein synthesis in cells. The poison can be ingested, inhaled, or absorbed through the skin.2. After being exposed to abrin, the victim will experience symptoms that resemble those of the flu. The symptoms might take many hours to appear. Fever, coughing, and difficulty breathing are among the symptoms.3. The abrin will circulate throughout the victim's body via the bloodstream after it has been consumed. The toxin has the ability to damage cells throughout the body.4. The ribosomes, which are responsible for translating RNA into proteins, are destroyed by abrin. This results in the cessation of protein production in cells, which causes the cells to die.5. The destruction of cells in the body's vital organs, such as the liver and kidneys, causes the victim's organs to fail.
As a result, the sequence of events, starting with the poisoning and concluding with the death of the victim, involves the ingestion, inhalation, or skin absorption of the abrin toxin.
For more information on poisoning kindly visit to
https://brainly.com/question/28043369
#SPJ11
what mass of water in grams contains 1.3 g of ca ? (1.3 g of ca is the recommended daily allowance of calcium for 19- to 24-year-olds.) express your answer using two significant figures.
the mass of water containing 1.3 g of Ca is 1.2 g.Calcium is a chemical element with the symbol Ca and atomic number 20. It is a soft, silvery-white metal that belongs to the alkaline earth group of the periodic table.
To determine the mass of water in grams containing 1.3 g of Ca, we can use the molecular mass of calcium and a bit of stoichiometry.
Calcium is a chemical element with the symbol Ca and atomic number 20. It is a soft, silvery-white metal that belongs to the alkaline earth group of the periodic table. Mass of calcium, Ca = 1.3 g.We can find the mass of water, w, using the following chemical equation:Ca + 2H2O → Ca(OH)2 + H2Using the molecular mass of Ca (40 g/mol), the equation above tells us that 1 mole of Ca reacts with 2 moles of H2O. Therefore,1 mole Ca = 2 moles H2O40 g Ca = 2 × 18 g H2O40 g Ca = 36 g H2O1 g Ca = 36 g/40 = 0.9 g H2O1.3 g Ca = 0.9 g H2O/g CaTherefore, the mass of water containing 1.3 g of Ca is:Mass of water = Mass of Ca × Mass of H2O/g CaMass of water = 1.3 g Ca × 0.9 g H2O/g CaMass of water = 1.17 g ≈ 1.2 g (to two significant figures)Therefore, the mass of water containing 1.3 g of Ca is 1.2 g.
To know more about stoichiometry Visit:
https://brainly.com/question/28780091
#SPJ11
write an equation showing ch3oh reacting as an acid with nh3.
CH₃OH (methanol) can act as a weak acid when reacting with NH₃ (ammonia), which is a weak base. The reaction between CH₃OH and NH₃ can be represented by the following equation:
CH₃OH + NH₃ ⇌ CH₃NH₃⁺ + OH⁻
In this equation, CH₃OH donates a proton (H⁺) to NH₃, forming the methanammonium ion (CH₃NH₃⁺) and hydroxide ion (OH⁻). This process is an example of an acid-base reaction, where CH₃OH acts as the acid (proton donor) and NH₃ acts as the base (proton acceptor).
The equilibrium arrow (⇌) indicates that the reaction can occur in both directions. It implies that some CH₃OH molecules will donate protons to NH₃, while others will react in the reverse direction, accepting protons from CH₃NH₃⁺ to regenerate NH₃ and CH₃OH.
It is important to note that the reaction between CH₃OH and NH₃ is relatively weak, as both compounds are considered weak acids and bases. Their acidity/basicity is relatively low compared to strong acids or bases. The extent of the reaction and the equilibrium position will depend on the concentrations of the reactants, temperature, and the specific conditions of the system.
Learn more about acids at https://brainly.com/question/27915098
#SPJ11
which condition results when body fluids become saturated with uric acid?
The condition that results when body fluids become saturated with uric acid is called gout.
Gout is the result of excess uric acid in the body that can accumulate in joints and tissues, causing inflammation and intense pain.
It usually affects the big toe, but it can also occur in other joints in the body.
What causes gout?
The accumulation of uric acid crystals in the joints and tissues of the body is caused by the overproduction of uric acid or the inability of the body to eliminate it through the kidneys. Certain foods, such as red meat, shellfish, and alcohol, can exacerbate the problem by increasing uric acid levels in the body.Treatments for gout include:
Medications to manage pain and inflammationLifestyle changes such as avoiding certain foods Increasing hydration to help flush excess uric acid from the body.Learn more about saturation:
https://brainly.com/question/1851822
#SPJ11
Which of the following has the highest percentage of enol in a keto-enol equilibrium? 2-heptanone heptanal acetaldehyde 2,5-heptanedione 2,4-heptanedione
In a keto-enol equilibrium, the enol form is the tautomeric form that contains an alcohol group (-OH) attached to a carbon-carbon double bond. The keto form, on the other hand, has a carbonyl group (C=O) with no -OH group.
To determine which compound has the highest percentage of enol in the equilibrium, we need to consider the stability of the enol form. Generally, the enol form is more stable when there are resonance effects that can stabilize the negative charge on the oxygen atom of the enol.
Out of the given compounds, 2,4-heptanedione and 2,5-heptanedione have the potential to form enol tautomers. Let's compare the resonance stabilization in both compounds:
2,4-heptanedione:
The enol form of 2,4-heptanedione can exhibit resonance stabilization due to the presence of a conjugated system. The double bond in the enol can resonate and delocalize the negative charge throughout the conjugated system, providing stability to the enol form.
2,5-heptanedione:
The enol form of 2,5-heptanedione does not have a conjugated system that can provide significant resonance stabilization. The double bond in the enol is isolated and cannot effectively delocalize the negative charge.
Based on the analysis, 2,4-heptanedione is expected to have a higher percentage of enol in the keto-enol equilibrium compared to 2,5-heptanedione. Therefore, 2,4-heptanedione is the compound that has the highest percentage of enol in the equilibrium out of the options provided.
To know more about carbonyl visit;
brainly.com/question/28213406
#SPJ11
find the [oh−] of a 0.38 m pyridine ( c5h5n ) solution. (the value of kb for pyridine ( c5h5n ) is 1.7×10−9 .) express your answer to two significant figures and include the appropriate units.
Pyridine (C5H5N) is a weak base. The dissociation of pyridine can be represented by the following equation:C5H5N (aq) + H2O (l) ⇌ C5H5NH+ (aq) + OH- (aq)The equilibrium constant for this reaction can be defined as:Kb = [C5H5NH+] [OH-]/ [C5H5N]Where [C5H5NH+] is the concentration of pyridinium ions, [OH-] is the concentration of hydroxide ions, and [C5H5N] is the concentration of pyridine.The Kb value for pyridine is 1.7×10-9.Molar mass of C5H5N = 79.10 g mol-1Concentration of pyridine solution = 0.38 mLet the concentration of pyridinium ions be ‘x’ and the concentration of hydroxide ions be ‘y’. According to the equilibrium reaction, at equilibrium,[C5H5NH+] = x mol/L[OH-] = y mol/L[C5H5N] = 0.38 mol/LInitially, there were no pyridinium ions or hydroxide ions present in the solution. Therefore, their concentrations were zero. At equilibrium, the concentration of pyridinium ions will be equal to the concentration of hydroxide ions. Hence, x = y. The equilibrium expression can be written as:Kb = (x)(y) / (0.38 - x)Kb can be substituted in the above equation. Then, the quadratic equation is formed:x2 + 1.7 × 10-9 x - 6.46 × 10-10 = 0Solving this equation gives:x = 5.15 × 10-6 MThe concentration of pyridinium ions is the same as the concentration of hydroxide ions. Therefore,[OH-] = 5.15 × 10-6 MAnswer: 5.15 × 10-6 M (Molarity)
To know more about hydroxide ions visit
https://brainly.com/question/14619642
#SPJ11
We have been given the following details to find the [OH-] of a 0.38 m pyridine (C5H5N) solution with a kb for pyridine of 1.7×10-9.
We can find the [OH-] of a solution in the following way:
Firstly, we need to calculate the value of the pKb for the given pyridine (C5H5N).
pKb = - log(Kb)⇒pKb = - log(1.7×10-9 )⇒pKb = 8.77
The value of pH is given by: pH + pOH = 14⇒pOH = 14 - pH
We know that when pyridine (C5H5N) is added to water, it reacts with water to produce H+ ions and the corresponding pyridine hydrochloride ions.
Hence, we have the following reaction: C5H5N + H2O ⇌ C5H5NH+ + OH-
We know that the expression for Kb is given by: Kb = [C5H5NH+][OH-] / [C5H5N]We also know that [C5H5N] = 0.38 M and Kb = 1.7 × 10-9.
Substituting the values in the expression of Kb, we get:1.7 × 10-9 = (x)(x) / 0.38⇒x2 = 6.46 × 10-10M or x = 8.03 × 10-6M
Therefore, the value of [OH-] in the given solution is 8.03 × 10-6M.
To learn more about pyridine visit;
https://brainly.com/question/31752515
#SPJ11
In which of the following compounds does nitrogen have an oxidation state of +4? O a) NO2 Ob) KNO2 O c) N₂0 d) HNO3 e) NH_Br
Among the given options, the compound in which nitrogen (N) has an oxidation state of +4 is option (d) HNO3.
Let's analyze the oxidation state of nitrogen in each compound:
a) NO2:
In NO2, nitrogen is assigned an oxidation state of +4. The oxygen atoms in this compound have an oxidation state of -2 each, so the sum of the oxidation states in NO2 is 4 - 2(2) = 0. Therefore, the oxidation state of nitrogen in NO2 is +4.
b) KNO2:
In KNO2, the potassium ion (K+) has a fixed oxidation state of +1. The oxygen atom in this compound is assigned an oxidation state of -2. We can assign the oxidation state of nitrogen as x. So, using the sum of oxidation states, we have +1 + x + (-2) = 0. Solving this equation, we find that x = +1. Therefore, nitrogen in KNO2 has an oxidation state of +1, not +4.
c) N₂O:
In N₂O, the oxygen atom is assigned an oxidation state of -2. Since the sum of the oxidation states must be zero, we can assign the oxidation state of nitrogen as x. So, we have 2x + (-2) = 0. Solving this equation, we find that x = +1. Therefore, nitrogen in N₂O has an oxidation state of +1, not +4.
d) HNO3:
In HNO3, the hydrogen atoms (H) have an oxidation state of +1. The oxygen atoms have an oxidation state of -2 each. We can assign the oxidation state of nitrogen as x. So, we have +1 + x + (-2)(3) = 0. Solving this equation, we find that x = +5. Therefore, nitrogen in HNO3 has an oxidation state of +5, not +4.
e) NH_Br:
The compound NH_Br is incomplete and lacks information. It cannot be determined whether nitrogen has an oxidation state of +4 without additional information.
To know more about compound visit;
brainly.com/question/14117795
#SPJ11
if the density of an unknown gas is 1.96 g/l at stp, what is its molar mass?
The molar mass of the unknown gas is approximately 43.68 g/mol.
To determine the molar mass of the unknown gas, we can use the ideal gas law equation, which states:
PV = nRT
Where:
P is the pressure (in this case, at STP, it is 1 atm)
V is the volume (given as 1 L)
n is the number of moles of the gas
R is the ideal gas constant (0.0821 L·atm/(mol·K))
T is the temperature in Kelvin (273.15 K at STP)
Rearranging the equation, we have:
n = PV / RT
Substituting the given values, we get:
n = (1 atm) * (1 L) / (0.0821 L·atm/(mol·K) * 273.15 K)
n = 0.04489 mol
To determine the molar mass, we divide the mass of the gas by the number of moles:
Molar mass = Mass / n
Given the density of the gas as 1.96 g/L, the mass of 1 L of the gas is 1.96 g.
Molar mass = 1.96 g / 0.04489 mol
Molar mass = 43.68 g/mol
Therefore, the molar mass of the unknown gas is approximately 43.68 g/mol.
To learn more about molar mass from the given link
https://brainly.com/question/21334167
#SPJ4
what is the predicted rate law? express your answer in terms of kk , [cl2][cl2] , and [chcl3][chcl3] .
To determine the predicted rate law, we need the actual reaction and the experimental data for the reaction rate. Without that information, it is not possible to provide a specific predicted rate law.
In general, the rate law expresses the relationship between the rate of a chemical reaction and the concentrations of its reactants. It is determined experimentally by measuring the reaction rate at different concentrations of the reactants.Apologies, but without specific experimental data or a given reaction, it is not possible to provide the predicted rate law or determine the concentrations of reactants. The rate law depends on the specific reaction and is determined experimentally by measuring the reaction rate at different concentrations of the reactants. Each reaction has its own unique rate law that cannot be predicted without experimental data.
To know more about reactants visit :
https://brainly.com/question/30129541
#SPJ11
Which of the following best describes why atoms are inherently neutral? A. They have an equal number of charged and neutral subatomic particles B. They have neutrons C. They have an equal number of protons and electrons D. They have an equal number of protons and neutrons
The correct answer is C. Atoms are inherently neutral because they have an equal number of protons and electrons.
Protons, which carry a positive charge, are located in the nucleus of an atom, while electrons, which carry a negative charge, orbit around the nucleus at specific energy levels. The number of protons determines the atomic number of an element, while the number of electrons is equal to the number of protons in a neutral atom.
Since the charges of protons and electrons are equal in magnitude but opposite in sign, the positive charge of the protons is balanced by the negative charge of the electrons. This equal distribution of positive and negative charges results in a neutral overall charge for the atom.
Option A is incorrect because it implies the existence of "neutral subatomic particles," which is not a recognized concept. Option B is incorrect because the presence of neutrons, which have no charge, does not directly contribute to the atom's neutrality. Option D is incorrect because it refers to the balance between protons and neutrons, which is related to the atomic mass but not the overall charge of the atom.
Therefore, the correct option is C.
Learn more about protons at https://brainly.com/question/1481324
#SPJ11
what would be the ph at the half-equivalent point in titration of a monoprotic acid with naoh solution if the acid has Ka = 5.2 x 10-6?
At the half-equivalence point in the titration of a monoprotic acid with NaOH, half of the acid has reacted with an equal molar amount of NaOH. This means that the moles of acid remaining are equal to the moles of NaOH added.
Given that the acid has a Ka value of 5.2 x 10^-6, we can assume that it is a weak acid. In this case, we can use the Henderson-Hasselbalch equation to calculate the pH at the half-equivalence point.
To know more about equivalence visit :
https://brainly.com/question/25197597
#SPJ11
what is the maximum concentration of ag⁺ that can be added to a 0.00300 m solution of na₂co₃ before a precipitate will form? (ksp for ag₂co₃ is 8.10 × 10⁻¹²)
A precipitate is a solid that emerges from a solution as a result of a chemical reaction, usually between two solutions with differing solubility characteristics.
This is due to a change in the equilibrium constant of a solute's dissolution reaction.
Solute Solubility Reaction of Na₂CO₃Na₂CO₃ → 2Na⁺(aq) + CO₃²⁻(aq)Ksp of Ag₂CO₃ is equal to the product of the silver ion and carbonate ion concentrations, according to the solubility equilibrium reaction of Ag₂CO₃, which is Ag₂CO₃(s) → 2Ag⁺(aq) + CO₃²⁻(aq)Ksp = [Ag⁺]²[CO₃²⁻]
Substituting the concentration of CO₃²⁻ with that of Na₂CO₃:Ksp = 2x² (x being the molar concentration of Ag⁺)For Ag₂CO₃: 8.10 × 10⁻¹² = 2x²Solving for x: 0.000001796 = x
The maximum amount of Ag⁺ that can be added is equal to x, the smallest value which does not surpass the maximum concentration of Ag⁺ to prevent a precipitate from forming, which is 5.00 × 10⁻¹⁰ M.
The maximum concentration of Ag⁺ that can be added to a 0.00300 M solution of Na₂CO₃ before a precipitate will form is 5.00 × 10⁻¹⁰ M.
Summary:Ksp of Ag₂CO₃ is 8.10 × 10⁻¹²
Learn more about precipitate click here:
https://brainly.com/question/14330965
#SPJ11
calculate the heat required to convert 35.0 g of c2cl3f3 from a liquid at 10.00 °c to a gas at 105.00 °c.
To calculate the heat required to convert a substance from a liquid to a gas, you need to consider two components
The heat required to raise the temperature of the liquid to its boiling point, and the heat required for the actual phase change from liquid to gas. These two components can be calculated separately and then added together Therefore, the heat required to convert 35.0 g of C2Cl3F3 from a liquid at 10.00 °C to a gas at 105.00 °C is approximately 2248.75 Joules.Using these parameters, the heat required to convert 35.0 g of C2Cl3F3 from a liquid at 10.00 °C to a gas at 105.00 °C can be calculated.
To know more about parameters visit :
https://brainly.com/question/29911057
#SPJ11
Among the following groups, which is the correct order of priorities in the R, S system? (1) -CH2CH2CI () -CH2CH2CH2Br (ili) -CH2OH (iv) -CF3 a. (ii) > (1) > (iii) > (iv) b. (1) > (iii) > (ii) > (iv) c. (iv) > (iii) > (1) > (ii) d. (iii) > (iv) > (ii) > (i)
The correct order of priorities in the R, S system is (iii) > (iv) > (ii) > (i).
:The R/S system is a way of specifying the absolute configuration of a chiral molecule. The priority of the group connected to the chiral carbon determines the R/S system.
The four groups on the chiral center are ranked by their atomic numbers.
The order of priorities for the given groups is as follows: (iii) > (iv) > (ii) > (i)So, the correct order of priorities in the R, S system is (iii) > (iv) > (ii) > (i).The answer is (d).
Summary:The order of priorities for the given groups is (iii) > (iv) > (ii) > (i). Thus, the correct order of priorities in the R, S system is (iii) > (iv) > (ii) > (i).
Learn more about molecule click here:
https://brainly.com/question/475709
#SPJ11
g sio2 is a(n) covalent network solid. ki is a(n) -- solid. ti is a(n) -- solid. c6h12o6 is a(n) -- solid.
The kinds of the solids are;
SiO2 - Covalent network solid
C6H12O6 - Covalent solid
KI - Ionic solid
What is a covalent network solid?
A covalent network solid, often referred to as a network covalent solid or just a network solid, is a category of solid material in which the atoms that make up the material are strongly covalently linked to one another, forming an extended three-dimensional network structure.
Covalent network solids are kept together by a dense network of covalent bonds, as opposed to molecular or ionic solids, which are held together by weaker intermolecular forces or ionic interactions, respectively.
Learn more about covalent network solid:https://brainly.com/question/30458552
#SPJ4
for no2(g) find the value of δh∘f . express your answer using four significant figures.
The balanced chemical equation for the formation of nitrogen dioxide (NO2) gas is given below:2NO(g) + O2(g) → 2NO2(g)The standard enthalpy of formation (ΔH∘f) is the change in enthalpy when 1 mole of a compound is formed from its elements in their standard states.
We can use standard enthalpies of formation (ΔH∘f) to calculate the heat of reaction (ΔHrxn) for any chemical reaction by subtracting the sum of the standard enthalpies of formation of reactants from the sum of the standard enthalpies of formation of products, and then multiplying the result by -1.We can calculate the value of ΔH∘f for NO2 using the standard enthalpies of formation of NO and O2.ΔH∘f(NO2) = 1/2ΔH∘f(O2) + ΔH∘f(NO)ΔH∘f(O2) = 0 kJ/mol (O2 is in its standard state, and its standard enthalpy of formation is zero)ΔH∘f(NO) = 90.25 kJ/mol (given)ΔH∘f(NO2) = 1/2(0 kJ/mol) + 90.25 kJ/mol = 45.125 kJ/molTo express this value using four significant figures, we must round it to 45.13 kJ/mol.Answer: δH∘f for NO2(g) = 45.13 kJ/mol (four significant figures).
To know more about chemical equation , visit ;
https://brainly.com/question/11231920
#SPJ11
many equivalence points does phosphoric acid have? how many of these equivalence points should you be able to see in this lab?
Phosphoric acid has three equivalence points, corresponding to its three dissociable protons. In this lab, you should be able to see all three equivalence points if you perform a complete titration of the acid.
Phosphoric acid, which has the chemical formula H3PO4, is a triprotic acid. This means it has three acidic hydrogen atoms that can be donated to a base in an acid-base reaction.
Therefore, phosphoric acid has three equivalence points. An equivalence point is reached when the number of moles of the base added to the acid is equal to the number of moles of acidic hydrogens in the acid.
In a lab setting, you should be able to observe all three equivalence points if you carefully titrate the phosphoric acid with a strong base, such as sodium hydroxide (NaOH), and use an appropriate indicator or a pH meter to monitor the changes in pH during the titration.
To know more about triprotic acid Visit:
https://brainly.com/question/29068526
#SPJ11
Which of the following is a Brønsted-Lowry base?
Cl2
HCN
CBr4
NH3
None of the above are Brønsted-Lowry bases.
options (Cl2, HCN, CBr4) are not bases according to the Brønsted-Lowry definition. Cl2 is a diatomic molecule, HCN is a weak acid, and CBr4 is a nonpolar molecule.
The Brønsted -Lowry theory defines an acid as a substance that donates a proton, and a base as a substance that accepts a proton. Ammonia (NH3) is a Brønsted - Lowry base, according to this definition. Therefore, NH3 is a Brønsted -Lowry base. The Brønsted Lowry theory is a model that describes acids and bases in terms of proton donation and acceptance, respectively. Any species that accepts a proton is classified as a Brønsted-Lowry base. In order to be able to identify the Brønsted -Lowry base, it is crucial to understand the concept of proton donation or acceptance.mong the options provided, NH3 (ammonia) is a Brønsted-Lowry base. It can accept a proton (H+) from an acid to form its conjugate acid, NH4+ (ammonium ion).
to know more about ammonia, visit
https://brainly.com/question/14854495
#SPJ11
please include the sign in front of the magnitude. (for example write your answer as 5 not 5 ) [fe(nh3)4br2]no3
The compound [Fe(NH₃)₄Br₂]NO₃ contains a coordination complex of iron (Fe) with four ammonia (NH₃) ligands and two bromide (Br) ions, surrounded by a nitrate (NO₃) ion.
The coordination complex [Fe(NH₃)₄Br₂]NO₃ consists of a central iron (Fe) ion bonded to four ammonia (NH₃) ligands, forming a square planar geometry. Additionally, two bromide (Br) ions are coordinated to the iron center. The complex is further stabilized by the presence of a nitrate (NO₃) ion. This compound showcases the ability of transition metals to form coordination complexes and exhibit diverse geometries based on the nature of the ligands and the coordination number of the metal ion.
To learn more about coordination complexes here:
https://brainly.com/question/30903373
#SPJ4