Answer:
1.01 L
Explanation:
Step 1: Write the balanced equation
2 HCl + CaCO₃ ⇒ H₂O + CO₂ + CaCl₂
Step 2: Calculate the reacting moles of HCl
64.0 mL (0.0640 L) of 1.261 M (1.261 mol/L) HCl react. The reacting moles are:
0.0640 L × 1.261 mol/L = 0.0807 mol
Step 3: Calculate the moles of CO₂ produced from 0.0807 moles of HCl
The molar ratio of HCl to CO₂ is 2:1. The moles of CO₂ produced are 1/2 × 0.0807 mol = 0.0404 mol.
Step 4: Calculate the volume occupied by 0.0404 moles of CO₂
0.0404 moles of CO₂ are at 28 °C (301 K) and 0.987 atm. We can calculate the volume occupied using the ideal gas equation.
P × V = n × R × T
V = n × R × T / P
V = 0.0404 mol × (0.0821 atm.L/mol.K) × 301 K / 0.987 atm = 1.01 L
Individual Laboratory Follow-up Questions a. Explain the purpose of the experiment. b. What are reasonable sources of error for determining calcium ion concentration by the titration process? c. Summarize the conclusions for your experiment in two to three complete sentences. Include the amount of calcium in your soil.
Solution :
a). In this experiments, we can determine the hardness of the water or [tex]$Ca^{2+}$[/tex] ion concentration in the sample.
b). The Possible errors are :
- During the weighing of calcium standard preparation, if the balance is not traced properly, it will cause an error.
- By dilution of standard from the stock will lead a dilution error of 0.1 mL for 100 mL.
- Misreading the liter values will give an error.
c). Depending upon the calcium content present in the soil, we conclude that the fertile percent of the soil as well as the mineral capacity of the soil.
Dry air is 78.09% nitrogen, 20.95% oxygen, 0.93% argon, 0.039% carbon dioxide so varying amounts of water vapor- depending on humidity. Some gases however strongly absorb infrared radiation and trap it in the atmosphere and can therefore result in elevated global temperatures. Therefore they are termed greenhouse gases. Which greenhouse gas have we observed a marked increase in atmospheric concentrations in the last 100 years?
A. methane (CH4)
B. carbon monoxide
C. carbon dioxide
D.ozone (03)
E. oxygen
F. nitrogen
G.water vapor (H20)
Answer:
C. Carbon dioxide
Explanation:
Carbon dioxide is one of the end-product of combustion reactions involving many fuels today.
With the rapid increase in urbanization and technological development, man demand for energy increased tremendously. The discovery of fossil fuels paved the way for the astronomical increase in the concentration of carbon dioxide in the atmosphere. The burning of fossil fuels like coal and oil invovles the process where the carbon atoms present in these fuels combine with oxygen in the air to make CO2. This has resulted in an increase in the concentration of atmospheric carbon dioxide (CO2).
The burning fossil fuels for electricity, industry, heat, and transportation are the major sources of the emossion of carbon dioxide.
Also, the cutting down of trees for paper production, building construction and for the establishment of settlements also increase the concentration of carbon dioxide in the atmosphere. Trees are help remove carbon dioxide from the atmosphere through the process of photosynthesis. However, when these trees are cut down, carbon dioxide accumulates in the atmosphere.
4. The table shows the thermal conductivity of some common materials. Which would be the best insulator A. diamond B. gold C. lead D. concrete
please help me
The answer should be diamond.
Explanation:
Combustion, or __________, is an example of one of the most familiar chemical changes. Melting of ice, likewise, is one of the most common examples of physical changes. When a piece of coal burns, combines with the carbon in the coal. The products are carbon dioxide gas, water vapor, and a lot of ash. After careful measurements are taken, the of the reactants (coal and oxygen) is to the mass of the products (carbon dioxide, water vapor, and ash). During the_________ reaction, the quantity of matter is unchanged. Similarly, when 10 grams of ice__________ , grams of water is obtained. Mass is_________ in this change as well.
Answer:
a) Burning
b) physical
c) 10
d) constant
Explanation:
Mass remains same in a physical reaction. It changes only in chemical reactions where some of the mass is lost as energy /heat.
Thus, during combustion mass changes while during melting mass of water do not changes.
Name the type of marked carbon
If 18.0 g of CO2 is produced in the reaction of C2H2 with O2 to form CO2 and
H2O, how many grams of H20 are produced in this reaction?
O 3.68 g
9.0 g
14.7 g
None of the above
7.37 g
Answer:
3.68 g
Explanation:
[tex]n_{CO2}[/tex] = 18 ÷ 44 = 0.4
2C2H2 + 5O2 → 4CO2 + 2H2O
2 : 5 : 4 : 2
0.409 (moles)
⇒ [tex]n_{H2O}[/tex] = 0.409 × 2 ÷ 4 = 0.2045 moles
⇒ [tex]m_{H2O}[/tex] = 0.2045 × 18 = 3.68 grams
How many grams of aluminum are needed to completely react with
192 g of oxygen gas?
Answer:
4.28g
Explanation:
Even when the temperature of a pan of water is less than the boiling point, water still evaporates. This is because
a. the speeds of individual molecules varies
b. conservation of energy
c. of convection
d. radiation
which property of steel is useful for making the car body circle the correct answer
ductile magnetic
sonorous strong
How much volume will 8.8 moles of gas fill at 0.12 atm at 56*C
Answer:
2000 L
General Formulas and Concepts:
Atomic Structure
MolesTemperature Conversion: K = °C + 273.15Gas Laws
Ideal Gas Law: PV = nRT
P is pressureV is volume (in L)n is number of molesR is gas constantT is temperature (in K)Explanation:
Step 1: Define
[Given] 8.8 moles gas
[Given] 0.12 atm
[Given] 56 °C = 329.15 K
Step 2: Solve for V
Substitute in variables [Ideal Gas Law Formula]: [tex]\displaystyle (0.12 \ atm)V = (8.8 \ mol)(0.0821 \ \frac{L \cdot atm}{mol \cdot K})(329.15 \ K)[/tex]Isolate V: [tex]\displaystyle V = \frac{(8.8 \ mol)(0.0821 \ \frac{L \cdot atm}{mol \cdot K})(329.15 \ K)}{(0.12 \ atm)}[/tex]Multiply/Divide [Cancel out units]: [tex]\displaystyle V = 1981.7 \ L[/tex]Step 3: Check
Follow sig fig rules and round. We are given 2 sig figs.
1981.7 L ≈ 2000 L
What is the highest sublevel for the element Boron?
Answer:
2p
Explanation:
Boron is a member of group 13. The highest energy sub-level is usually found on the outermost shell of the atom of the element involved.
For a group 13 element, its outermost shell configuration is ns2 np1. The electronic configuration for boron is; 1s2 2s2 2p1.
Hence the highest energy sub-level in boron is 2p.
Vibrating molecules and atoms are an example of ___________________ energy, which falls into the ______________________ energy category.
Thermosetting polymers are less likely to be recycled than thermoplastic polymers because: Thermosetting polymers are less likely to be recycled than thermoplastic polymers because: Some other reason. They are so cheap that it is not worthwhile to recycle them. They cannot be re-melted by heating to form into new shapes. They are so durable that there are not enough thermosetting polymers in the waste stream to set up a recycling program.
Answer:
They cannot be re-melted by heating to form into new shapes.
Explanation:
Recycling refers to the process of melting a plastic and making it into another shape or size.
Thermoplastics can be softened repeatedly, melted and remoulded. Thermosetting polymers can not be softened, melted and remoulded once they are formed.
Hence, thermosetting polymers cannot be re-melted by heating to form into new shapes therefore they can't be recycled.
2. Why is it difficult for us to go up in a mountain than go down?
A We are moving against gravity
B. We are pulled by the wind
C. We are moving towards gravity.
D. None of the above
Farth
help
Answer:
We are moving against gravity
Most physical and chemical changes in matter include a change of energy true or false
Answer: true
Explanation:
Energy changes are a common component of physical and chemical changes in matter. Hence the statement is True.
Briefing:Physical changes and chemical changes are the two different types of changes that chemists examine. A substance can undergo physical changes without having its identity altered. Chemical transformations take place when one substance transforms into another.
Which is a chemical change?When one chemical material changes into one or more others, as when iron rusts, this is referred to as a chemical transformation. Chemical reactions produce changes in the way that atoms and molecules are ordered, which leads to the formation of new substances with new properties.
To know more about Chemical change visit:
https://brainly.com/question/23693316
#SPJ2
In an experiment, students were given an unknown mineral. The unknown mineral was placed in 150 ml of water. Once in the water, the volume went up to 165 ml. Then when the same object was dried, then massed on a balance. It had a mass of 225 grams. What is the density of the unknown mineral?
Note: You only have to fill in the numerical answer.
Answer:
15 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
But from the question
volume = final volume of water - initial volume of water
volume = 165 - 150 = 15 mL
We have
[tex]density = \frac{225}{15} = 15 \\ [/tex]
We have the final answer as
15 g/mLHope this helps you
How much heat will be transferred when 0.54g of sulfur reacts with 0.54g of oxygen to produce sulfur trioxide according to the following reaction:
2 S + 3 O2 =2 SO3 + 790kJ
Answer:
-4.4 kJ
Explanation:
True or false when matter changes it’s state it is a physical change because it is the same substance the whole time.
Answer:
true
Explanation:
Si-4) AN= 14 AM= 28
e= n=
Answer:
have a good day
Explanation:
How many miles of N are in 0.179g of N2O?
Answer:
8.14x10⁻³ moles of N
Explanation:
In order to solve this problem first we convert 0.179 grams of N₂O into moles, using its molar mass:
0.179 g ÷ 44 g/mol = 4.07x10⁻³ mol N₂OThen we convert N₂O moles into N moles, using the data given by the compound's formula (that there are two N moles per N₂O mol):
4.07x10⁻³ mol N₂O * [tex]\frac{2molN}{1molN_2O}[/tex] = 8.14x10⁻³ mol NWhich type of radiation poses the fewest safety issues?
A. Beta
B. Gamma
C. Alpha
D. X-rays
Answer:
C. Alpha
Explanation:
I did it and I got it right
Answer: C. Alpha
Explanation:
Which of the following chemical substances has diatomic molecules? a) carbon dioxide b) nitrogen c) ozone d) nitrogen dioxide
Answer:
C I think
Explanation:
What is the pH of sulfuric acid?
Explanation:
0.3,1.2, or 2.1. sorry if it's wrong.
Engineers find a new metal that is stronger than steel.. (so on)
Answer is : D "Collaborate with other engineers in the design of a plane made from this metal".
Answer:
Explanation:
same thing as normal plane. just replace normal metal with this new sick metal :cool:
also make sure it weighs a good amount and won't fall from weight... im confused was this already answered???
Answer:
Collaborate with other engineers in the design of a plane made from this metal
Explanation:
<3
Plzzzzz help... What causes specific lines to appear in a line spectrum?
Answer:
Spectral lines are produced by transitions of electrons within atoms or ions. As the electrons move closer to or farther from the nucleus of an atom (or of an ion), energy in the form of light (or other radiation) is emitted or absorbed.…
Explanation:
Specific lines appear in a line spectrum because produced by transitions of electrons within atoms or ions.
What are spectral lines?Spectral lines are produced when the electrons undergoes transitions within atoms or ions. When the electrons move far or near to nucleus of any atom, radiation of particular wavelength is emitted or absorbed.
These emitted light is represented as they are moving from one state to the another.
Thus, specific lines appear in a line spectrum because produced by transitions of electrons within atoms or ions.
Learn more about spectral lines.
https://brainly.com/question/27494244
#SPJ2
Copper can be shaped into wires because it is
.ANSWER:Copper is a ductile metal
EXPLAIN :This means that it can easily be shaped into pipes and drawn into wires. Copper pipes are lightweight because they can have thin walls. They don't corrode and they can be bent to fit around corners.
Copper is a ductile metal due to ductility.This means that it can easily be shaped into pipes and drawn into wires. Copper pipes are lightweight because they can have thin walls.
Ductility is a mechanical property commonly described as a material's amenability to drawing (e.g. into wire).In materials science, ductility is defined by the degree to which a material can sustain plastic deformation under tensile stress before failure. Ductility is an important consideration in engineering and manufacturing. It defines a material's suitability for certain manufacturing operations (such as cold working) and its capacity to absorb mechanical overload.
Some metals that are generally described as ductile include gold and copper, while platinum is the most ductile of all metals in pure form.However, not all metals experience ductile failure as some can be characterized with brittle failure like cast iron. Polymers generally can be viewed as ductile materials as they typically allow for plastic deformation.
Learn more about ductility,here:
https://brainly.com/question/29416697
#SPJ6
A gas has a volume of 10 L at 200 K and a pressure of 1.5 atm . What would the volume of the gas be at 300 K and 2atm of pressure ?
Answer:
hi
Explanation:
I'm just figuring this out what am I doing
Using spdf notation, what is the electron configuration for a neutral atom of beryllium
Answer:
Beryllium
Explanation:
Ametal used in hot water system?
Answer:
Nichrome
Answer: Hot water system coils are commonly made up of metal alloys which are a combination of two or more elements. The most commonly used metal alloy is “Nichrome”. Nichrome is an alloy of nickel (80%) and chromium (20%).
As a rollercoaster travels upward what type of energy transfer is taking place?A.electrical to thermal energy B.kinetic to potential energy C.mechanical to chemical energy D.potential to kinetic energy
Answer:
B.
Explanation: