Answer:
I think it's thermal energy. c:
Answer
Thermal energy transfers occur in three ways: conduction, convection, and radiation. Conduction is when thermal energy is transferred between molecules in contact with one another.
Thermal is the answer.
Which do you think will cool the fastest?
sand
water
air
metal
Type the correct answer in the box. Express your answer to three significant figures. Sodium hydroxide and magnesium chloride react as shown by this equation: 2NaOH MgCl2 → Mg(OH)2 2NaCl. Suppose the reaction begins with 637 milliliters of 1. 35 M sodium hydroxide solution and excess magnesium hydroxide. What is the theoretical yield of magnesium hydroxide if the resulting solution has a volume of 2. 82 liters? Use the periodic table and the polyatomic ion resource. The mass of magnesium hydroxide formed is grams.
25.07grams is the theoretical yield of magnesium hydroxide if the resulting solution has a volume of 2. 82 liters.
How we calculate the mass from moles?Mass of any substance will be calculated from moles as:
n = W/M, where
W = given or required mass
M = molar mass
Given chemical reaction is:
2NaOH + MgCl₂ → Mg(OH)₂ + 2NaCl
From the stoichiometry of the reaction, it is clear that:
2 moles of NaOH = produce 1 mole of Mg(OH)₂
1 mole of NaOH = produce 1/2 mole of Mg(OH)₂
Given concentration of NaOH = 1.35M
Given volume of NaOH = 637mL = 0.637L
Moles of NaOH will be calculated as:
M = n/V
n = 1.35M × 0.637L = 0.859 moles
So, 0.859 moles of NaOH = produce 0.859×1/2 = 0.429 moles of Mg(OH)₂
Now, we convert this moles into grams by using the above formula:
0.429 = W/58.31 g/mole
W = 25.07grams
Hence, 25.07grams is the theoretical yield of magnesium hydroxide.
To know more about moles, visit the below link:
https://brainly.com/question/24631381
A 50 mL sample is held at 100 kPa. What pressure does it exert when the gas is compressed to 40 L.
Who's Law did you use?
Newton's third law
Explanation:
Calculate the pH for the following solutions and indicate whether each solution is acidic or basic.
[H+] = 2.4 × 10-6M pH = __________ Acid/Base
[tex]\\ \rm\Rrightarrow pH=-log[H^+][/tex]
[tex]\\ \rm\Rrightarrow pH=-log(2.4\times 10^{-6})[/tex]
[tex]\\ \rm\Rrightarrow pH=-log2.4-log10^{-6}[/tex]
[tex]\\ \rm\Rrightarrow pH=-0.38+6[/tex]
[tex]\\ \rm\Rrightarrow pH=5.62[/tex]
AcidBurning hydrogen is an example of a chemical reaction. The reaction is
shown in the diagram. Which of the following statements about energy in
this reaction is the most accurate?
Answer:
Energy is first released then arbsorbed the eventually it dissappears
Explanation:
One year, a herd of cattle released 2.44 metric tons of CH4 (methane) into the atmosphere. How many metric tons of carbon did this methane contain
The mass, in metric tons, of carbon in the methane is 1.83 metric tons
Calculating mass in a substance
From the question, we are to determine the quantity of carbon in the methane
The mass of carbon in the methane can be calculated from
Mass of carbon in the methane = [tex]\frac{Mass\ of\ carbon\ in\ a\ molecule\ of \ methane}{Mass\ of\ a\ molecule\ of \ methane}\times Total\ mass\ of\ the\ methane[/tex]
Mass of carbon in a molecule of methane = 12 g
Mass of a molecule of methane = 16 g
Therefore,
Mass of carbon in the methane = [tex]\frac{12}{16} \times 2.44[/tex]
Mass of carbon in the methane = 1.83 metric tons
Hence, the mass, in metric tons, of carbon in the methane is 1.83 metric tons
Learn more on Calculating mass in a substance here: https://brainly.com/question/4798143
Which choice describes climate? In March 1971, Canada was hit by a major blizzard and up to 32 inches of snow fell. The U.S. gulf coast was hit by Hurricane Katrina in 2005 and suffered extensive damage. The U.S. gulf coast typically has warm, wet weather and tropical storms during the summer and fall. An extremely dangerous tornado hit Jarrell, Texas in 1997 destroying 40 homes.
Answer:
Its C
Explanation:
If you look, you can see that it tells you the humidity and the that its warm but it also tells you that it storms a little to and that makes it easier to know the climate but if it just sayed it was warm that wouldn't be enough information
CAN I PLS HAVE BRAINLIEST. I NEVER GET IT. ITS A LITTLE CROWN UNDER MY ANSWER. PLS. ILL GIVE YOU BRAINLIEST JUST PLS
explain the occurrence of oxygen
Answer:
Oxygen is one of the most abundant elements on Earth. Oxygen accounts for 20.9% of the atmosphere, 45% of the Earth's crust (as oxide minerals) and also accounts for almost all of the mass of water on Earth (89%). It is found in a huge number of natural minerals including sulfates, phosphates, carbonates and oxides.
Explanation:
Hope this helps
What type of bonds are located between the nucleotides found in the same DNA strand ?
Group of answer choices
phosphodiester
hydrogen
hydrophobic
van der waals
ionic
Answer:
hydrogen bond exists between nucleotides
Answer:
phosphodiester
Explanation:
Noncovalent hydrogen bonds connect the nucleotides that make up each DNA strand. Individual hydrogen bonds are weaker than covalent bonds like phosphodiester bonds. But they are so numerous that they strongly connect the two DNA polymers.
I hope this helps you
:)
2N₂ + 5 0₂2 N₂O5 What mass of nitrogen is required to react with 5.04 grams of oxygen?
Answer:
1.76g of N
Explanation:
5.04g x 1mol/16mol x 2mol/5mol x 14.01g/1mol = 1.76g
Which pair of compounds represents one arrhenius acid and one arrhenius base?.
Explanation:
use the diagram above to understand it
The chemical equation below shows the combustion of methane (ch4). ch4 2o2 right arrow. co2 2h2o the molar mass of oxygen gas (o2) is 32.00 g/mol. the molar mass of carbon dioxide (co2) is 44.01 g/mol. what mass of co2, in grams, will form when 8.94 g o2 completely react? 3.25 grams 6.15 grams 13.0 grams 53.0 grams
6.15 grams of carbon dioxide is form when 8.94 g of oxygen is completely react.
How we calculate mass from moles?Mass of any substance will be calculated from moles as :
n = W/M, where
W = required mass
M = molar mass
Given combustion reaction is:
CH₄ + 2O₂ → CO₂ + 2H₂O
Given mass of O₂ = 8.94 g
Molar mass of O₂ = 32.00 g/mole
Moles of O₂ = 8.94 / 32 = 0.279 mole
From the stoichiometry of the reaction, it is clear that:
2 moles of O₂ = produce 1 mole of CO₂
0.279 moles of O₂ = produce 1/2×0.279 = 0.139 moles of CO₂
Molar mass of CO₂ = 44 g/mole
Required mass of CO₂ will be calculated as:
W = n × M
W = 0.139 × 44 = 6.15 grams
Hence, option (2) is correct i.e. 6.15 grams.
To know more about moles, visit the below link:
https://brainly.com/question/15374113
Answer:
Option 2/ B. 6.15 grams on edge.
Explanation:
S/o to the person above me, got it because of them.
What do you know about other ecosystems in which predators havre caused their prey to go extinct
Answer:
Humans :)
Explanation:
Humans have killed so many species of wolves, deer, tigers, lions and bears oh my!
In the food chain, we, humans are at the top because of this
what mass of magnesium bromide is produced when 35cm3 of 0.18 mol/dm3 of hydrogen bromide is treated with magnesium nitrate?
Answer:
C3H8
Explanation:
1 1.5mol
2 0.75mol
3 0.667mol
Questions 1.2
1 16.7mol
2 8.3×10−3mol
Questions 1.3
1 9
2 11
3 12
4 24
5 22
Questions 1.4
1 a) 151.9
b) 162.1
c) 60.0
d) 132.1
e) 388.8
2 a) 0.5mol
b) 2.5mol
c) 0.6mol
d) 2.0mol
e) 0.38mol
3 a) 180.6g
b) 44.46g
Questions 1.5
1 Mr = 277.9 moles of oxygen = 11
2 Mr = 474.3 moles of oxygen = 20
Questions 1.6
1 Cu2S
2 C3H8
3 CaFe2O4
Questions 1.7
1 a) 2H2 + O2 → 2H2O
b) I2 + 3Cl2 → 2ICl3
c) NaOH + Al(OH)3 → NaAlO2 + 2H2O
d) 2H2S + SO2 → 3S + 2H2O
e) 4NH3 + 3O2 → 2N2 + 6H2O
2 a) MgCO3 → MgO + CO2
b) Pb(s) + 2AgNO3(aq) → Pb(NO3)2(aq) + 2Ag(s)
c) Na2O(s) + H2O(l) → 2NaOH(aq)
d) 2FeCl2 + Cl2 → 2FeCl3
e) Fe2(SO4)3 + 6NaOH → 2Fe(OH)3 + 3Na2SO4
Questions 1.8
1 17.0g
2 60.7g
3 51.1%
Questions 1.9
1 1.2dm3
2 Volume of SO2 = 50cm3; mass of sulfur = 0.20g
Questions 1.10
1 a) 2.67moldm−3
b) 0.025moldm−3
c) 0.833moldm−3
2 a) 0.75mol
b) 0.044mol
c) 0.010mol
Which explanations did you include in your response? Check all that apply. The oxidation number of carbon changes from -1 to +4. The oxidation number of oxygen changes from 0 to -2. Carbon is oxidized. Oxygen is reduced. Electrons are transferred from carbon to oxygen.
Answer:
B, E
Explanation:
Edge
Will give brainliest... what is the [OH-] of a solution whose pOH is equal to 2.86
Answer:
the pOH of a solution is the negative logarithm of the hydroxide-ion concentration. by this yields a [OH − ] of 1.0 × 10 -10 M. Finally the pOH of the solution equals -log(1.0 × 10 -10 ) = 10.Explanation:
The concentration of hydroxide ion of a solution whose pOH value is equal to 2.86 is 1.38×10⁻³ M.
How do we calculate the concentration of OH⁻?Concentration of hydroxide ion will be calculated by using the pOH value by using the below equation as:
pOH = -log[OH⁻]
[OH⁻] = [tex]10^{-pOH}[/tex]
Given that value of pOH = 2.86
On putting values we get,
[OH⁻] = [tex]10^{-2.86}[/tex]
[OH⁻] = 0.00138 = 1.38×10⁻³ M
Hence concentration of hydroxide ion is 1.38×10⁻³ M.
To know more about pOH & [OH⁻], visit the below link:
https://brainly.com/question/26984550
A 1.00 l volume of hcl reacted completely with 2.00 l of 1.50 m ca(oh)2 according to the balanced chemical equation below. 2hcl ca(oh)2 right arrow. cacl2 2h2o what was the molarity of the hcl solution? 0.375 m 1.50 m 3.00 m 6.00 m
6 M is the molarity of the HCl solution with volume 1 liter.
How we calculate molarity?
Molarity (M) of solution is define as the number of moles (n) of solute present in per liter (V) of solution, i.e. M = n/V.
Given chemical reaction is:
2HCl + Ca(OH)₂ → CaCl₂ + 2H₂O
Given volume of HCl = 1 L
Given volume of Ca(OH)₂ = 2 L
Molarity of Ca(OH)₂ = 1.50M
Moles of Ca(OH)₂ = 1.50 × 2 = 3 moles
From the stoichiometry of the reaction:
1 mole of Ca(OH)₂ = react with 2 moles of HCl
3 mole of Ca(OH)₂ = react with 2×3=6 moles of HCl
Molarity of HCl will be calculated by using the above given formula as:
M = 6/1 = 6M.
Hence, option (4) is correct i.e. 6 M.
To know more about molarity, visit the below link:
https://brainly.com/question/16343005
Answer:
D
Explanation:
trust
2. During which of the following stato changes would the particles in the matter become more spread out?
changing from liquid to gas?
changing from gas to liquid?
changing from gas to solid?
Answer
changing from liquid to gas
Explanation
changing from liquid to gas
At a research lab, a scientist carelessly pours cultures of living microbes down the drain
Answer:
that's not good
Explanation:
microbes???? not good for a sewage system
true or false: A person standing still with two heavy bundles is doing a lot of work
ii) Adding common salt to distilled water makes it a) Good conductor b) Insulator c) Both a &b a
Answer:
Explanation:
Salt + water gives an adequate conductor. It is not absolutely wonderful like silver, but it will conduct electricity to varying degrees depending on the depth of salt water that the conductor is held at.
I'd say A.
Somebody help me? my head hurts here
1.between which two points is the car accelerating at the greatest rate?
2.between which two points is the car travelling at a steady speed?
3.what is the acceleration of the car between C and D?
4.between which two points is the acceleration getting bigger and bigger?
5.what is the acceleration of the car between D and F?
Answer 1 :
[tex]\green{\sf{D \: and \: E}}[/tex]
Step-by-step explanation:
As per graph, the highest lines are D and E. They are increasing.
Answer 2:-
[tex]\sf{\blue{B \: and \: C}}[/tex]
Step-by-step Explanation:
It is because the line between B and C is straight, indicating that it is steady.
Answer 3:-
[tex]\sf{\pink{2 \: m/s}}[/tex]
Step-by-step Explanation:
Its because the interval between line CD can be taken as-
[tex]\sf{40-50 = 1 m/s} \\ \sf{50-60 = 2 m/s}[/tex]
Hence, 2 m/s.
Answer 4:
[tex]\sf{\red{A \: and \: E}}[/tex]
Step-by-step Explanation:
We can see from the graph that the change in lines us occurring between initial and final points, i.e., between A and E.
Answer 5:
[tex]\sf{\purple{1m/s}}[/tex]
Step-by-step Explanation:
This is because, we can consider the interval between points D and E as :-
[tex]\sf{60-70=1m/s}[/tex]
Carbon dioxide has a relatively high solubility in blood plasma, although it has a very low partial pressure. What law describes this phenomenon
Answer:
The bulk of carbon dioxide is carried chemically combined with the amino acids of hemoglobin as carbaminohemoglobin in the RBCs.
Predict the products
___Cu(NO3)2 + ___NaOH → ___ ________ + ___ ________
___ CuO + 2 HCl → ___ H2O + ___ ________
Answer:
1.) Cu(NO₃)₂ + 2 NaOH --> Cu(OH)₂ + 2 NaNO₃
2.) CuO + 2 HCl --> H₂O + CuCl₂
Explanation:
Both of these reactions are substitution/double displacement reactions. The base reaction looks like this: AX + BY --> AY + BX. In other words, the negative ion of the first molecule bonds to the positive ion of the second molecule, and vice versa.
The products of the first equation are:
Cu(NO₃)₂ + NaOH --> Cu(OH)₂ + NaNO₃
The OH⁻ and the NO₃⁺ are polyatomic ions, meaning they stay together in these types of reactions. When determining the products, make sure to take note of the charges on the ions because subscripts may be necessary to balance them out.
Now you need to balance the coefficients. When balancing equations, begin with an element that is not present in more than one molecule on either side (ex. the oxygen is in two molecules on the reactant side). Keep in mind that the subscripts should be multiplied by the coefficients when determining the number of some elements.
The balanced first equation is:
Cu(NO₃)₂ + 2 NaOH --> Cu(OH)₂ + 2 NaNO₃
The process for the second equation is nearly identical to the first. The balanced second equation is:
CuO + 2 HCl --> H₂O + CuCl₂
Using one specific example, explain why the human genome project
considered important.
Answer:
initiated the comprehensive discovery and cataloguing of a 'parts list' of most human genes
Explanation:
Aluminum metal can be recycled from scrap metal by melting the metal to evaporate impurities. a. Calculate the amount of heat needed to purify 1.00 mole of Al originally at 298 K by melting it. The melting point of Al is 933 K. The molar heat capacity of Al is 24 J/(mol K), and the heat of fusion of Al is 10.7 kJ/mol.
The amount of heat required to purify the Al is 25.94 * 10^3 J
What is heat capacity?The term heat capacity refers to the amount of heat required to raise the temperature of a substance by 1K. The aluminum was heated from 298 K to 933 K then it melted.
The total heat required is;
H = ncdT + nL
H = (1 * 24 * (933 - 298)) + (1 * 10.7 * 10^3)
H = 15.24 * 10^3 J + 10.7 * 10^3 J
H = 25.94 * 10^3 J
Learn more about heat capacity: https://brainly.com/question/1453843
If right you will be marked brainiest :)
Answer: They are the same species and have the same traits.
Explanation: These horses are well, the same species because they are horses. They have very similar traits.
Let me know if this is right!
Where does Respiration mainly take place in?
A - Mitochondria
B - The nucleus
C - The cell wall
D - The vacuole
(c) Graphite is another naturally-occurring form of carbon.
Graphite can be used in pencils because it is soft and can leave marks on paper.
Graphite can also be used as a conductor of electricity.
Explain why graphite is soft and conducts electricity.
Refer to structure and bonding in your answer.
(5)
DO NOT WRITE IN THIS AREA
Graphite is a fantastic lubricant and a powerful electrical conductor because of these unbound electrons.
What is the purpose of Unbound?Unbound can serve as a caching server, it can also perform recursion, store records obtained from other DNS servers, and provide an authoritative service, such as if you only have a few zones.
As a result, it can act as a "glue" server or host a small zone with only a few domains, making it ideal for a lab.
Why need to utilize Unbound DNS?
With its harden-glue, access control, maximum randomization for request ID and ports, response scrubbing, case preservation, plus Denial of Service or DoS prevention capabilities, Unbound is feature-rich with DNS Security. These are only a few.
Therefore, graphite is a fantastic lubricant and a powerful electrical conductor because of these unbound electrons.
To know more about Unbound electrons visit:
https://brainly.com/question/14657932
#SPJ1
How many energy levels does europium have?
Answer:
6 Energy levels
Explanation:
First Energy Level: 2
Second Energy Level: 8
Third Energy Level: 18
Fourth Energy Level: 25
Fifth Energy Level: 8
Sixth Energy Level: 2
Hope this helps.