The probability of success in any attempt to make a carrot cake was 0.3 out of 10 attempts, The probability of having exactly 3 successes is 0.2661.
The probability of having exactly 3 successes is 0.2661, considering that the probability of success in any attempt to make a carrot cake was 0.3 out of 10 attempts.
Explanation: The question gives us:
P(Success) = 0.3, so
P(Failure)
= 1 - 0.3
= 0.7 and n = 10
Let X be the number of successes in 10 attempts
The probability of having exactly x successes in n trials is given by the binomial probability mass function:
[tex]P(X = x) = nCx * p^x * q^(n-x),[/tex]
where [tex]nCx = n! / (x! * (n-x)!)[/tex]
Where x = 3, n = 10, p = 0.3 and q = 0.7
Putting these values in the formula, we get:
P(X = 3) = 10C3 * 0.3^3 * 0.7^(10-3)P(X = 3)
= 120 * 0.027 * 0.057P(X = 3)
= 0.2661
Therefore, the probability of having exactly 3 successes is 0.2661.
To learn more about probability visit;
https://brainly.com/question/31828911
#SPJ11
Question 4 If f(t)=1-t-t2-t³, then what is f(-1)? Enter only a number as your answer below.
Question 4 If f(t)=1-t-t2-t³, then what is f(-1)? Enter only a number as your answer below.
The function [tex]f(t) = 1 - t - t^2 - t^3[/tex] gives the value of [tex]f(-1) = 0[/tex]
In order to find the value of [tex]f(-1)[/tex], we have to replace [tex]t[/tex] with [tex]-1[/tex]. Therefore, we have to find the value of [tex]f(-1)[/tex] as follows:
[tex]f(-1) = 1 - (-1) - (-1)^2 - (-1)^3[/tex]
[tex]= 1 + 1 - 1 + (-1)[/tex]
[tex]= 0[/tex]
Therefore, the value of f(-1) for the function [tex]f(t) = 1 - t - t^2 - t^3[/tex] is [tex]0[/tex]
We can substitute values into a polynomial function for determining its value at that point.
The sum of polynomial powers with coefficients is defined as a polynomial. The simplest polynomials, also known as monomials, have only one term. Binomials and trinomials are two-term and three-term polynomials, respectively.
Learn more about monomials here:
https://brainly.com/question/9183135
#SPJ11
Georgianna claims that in a small city renowned for its music school, the average child takes more than 5 years of piano lessons. We have a random sample of 20 children from the city, with a mean of 5.4 years of piano lessons and a standard deviation of 2.2 years. Do the data provide strong evidence to support Georgiannna's claim?
The data does not provide strong evidence to support Georgiannna's claim, as the lower bound of the interval is not greater than 5.
What is a t-distribution confidence interval?The t-distribution is used when the standard deviation for the population is not known, and the bounds of the confidence interval are given according to the equation presented as follows:
[tex]\overline{x} \pm t\frac{s}{\sqrt{n}}[/tex]
The variables of the equation are listed as follows:
[tex]\overline{x}[/tex] is the sample mean.t is the critical value.n is the sample size.s is the standard deviation for the sample.The critical value, using a t-distribution calculator, for a two-tailed 80% confidence interval, with 20 - 1 = 19 df, is t = 1.7291.
The parameters for this problem are given as follows:
[tex]\overline{x} = 5.4, s = 2.2, n = 20[/tex]
The lower bound of the interval is given as follows:
[tex]5.4 - 1.7291 \times \frac{2.2}{\sqrt{20}} = 5[/tex]
The upper bound of the interval is given as follows:
[tex]5.4 + 1.7291 \times \frac{2.2}{\sqrt{20}} = 5.8[/tex]
More can be learned about the t-distribution at https://brainly.com/question/17469144
#SPJ4
Consider the following problem for the payoff table (Profit S) with four decision alternatives and three state nature: $1 $2 $3 p-0.19 p=0.25 ре D₁ 3 39 63 D₂ 9 33 52 D3 14 28 41 D4 16 23 48 What is the expected value of perfect information (EVPI) ($) for the payoff table? (Hint: You can calculate the Expected value with perfect information (EVWPI)= (16*0.19+39*0.25+63*(1-0.19-0.25))) (Round your answer to 2 decimal places)
To calculate the expected value of perfect information (EVPI) for the given payoff table, we first need to determine the expected value with perfect information (EVWPI) and then subtract the maximum expected value under the current decision-making scenario.
Therefore, the expected value of perfect information (EVPI) for this payoff table is approximately -$9.08. This value represents the potential benefit of having perfect information about the states of nature in making decisions, taking into account the difference between the best decision under perfect information and the best decision without perfect information.
To learn more about payoff table click here; brainly.com/question/30025454
#SPJ11
Use the pair of functions to find f(g(x)) and g(f(x)) . Simplify
your answers. f(x)=x−−√+4 , g(x)=x2+7 Reminder, to use sqrt(() to
enter a square root.
1. f(g(x))
2. g(f(x))
1. [tex]f(g(x)) = \sqrt\((x^2 + 7)) + 4[/tex]
2. [tex]g(f(x)) = (x - \sqrt\(x) + 4)^2 + 7[/tex]
What are f(g(x)) and g(f(x)) for the given pair of functions?To find f(g(x)), we substitute the function g(x) into f(x) and simplify.
Given:
[tex]f(x) = \sqrt\ x + 4\\g(x) = x^2 + 7[/tex]
We have,
[tex]f(g(x)) = \sqrt\((x^2 + 7)) + 4[/tex]
For g(f(x)), we substitute the function f(x) into g(x) and simplify. We have:
[tex]g(f(x)) = (\sqrt\(x) + 4)^2 + 7[/tex]
Simplifying further, we expand the square in g(f(x)):
[tex]g(f(x)) = (x - \sqrt\(x) + 4)^2 + 7[/tex]
These are the simplified expressions for f(g(x)) and g(f(x)).
Learn more about function composition
brainly.com/question/30660139
#SPJ11
let random variable x have pmf f(x)=1/8 with x=-1,0,1 and u(x)=x2. find e(u(x))
If `X` is a discrete random variable, then its expected value is defined as:`
E(X) = Σᵢ xᵢ f(xᵢ)
`where the sum is taken over all possible values of `X`.
Let random variable X have pmf `
f(x) = 1/8` with `x = -1, 0, 1` and `u(x) = x²`.
Find `E(u(x))`.Solution:Given, random variable X has pmf
`f(x) = 1/8` with `x = -1, 0, 1` and `u(x) = x²`
.We need to find `E(u(x))`.We know that the expected value of a function `g(X)` is defined as:`E[g(X)] = Σᵢ g(xᵢ)f(xᵢ) `where `xᵢ` is each value that `X` can take on and `f(xᵢ)` is the probability that `X = xᵢ`.
So, we have:`E(u(x)) = Σᵢ u(xᵢ)f(xᵢ)``````````= u(-1)f(-1) + u(0)f(0) + u(1)f(1)``````````= (-1)²(1/8) + (0)²(1/8) + (1)²(1/8)``````````= (1/8) + (1/8)``````````= 1/4`Therefore, `E(u(x)) = 1/4`.Answer:Thus, the expected value of `u(x)` is `1/4`.Explanation: The expected value is the summation of the probability-weighted values of a random variable.
To know more about random variable visit:-
https://brainly.com/question/30789758
#SPJ11
du/dt=e^(5u+5t). solve the separable differential equation for u. use the initial condition u(0)=12
Given differential equation is[tex];du/dt = e^(5u+5t)[/tex]Now, we have to solve this differential equation for u using the initial condition u(0) = 12.the solution of the separable differential equation [tex]du/dt = e^(5u+5t)[/tex] with initial condition u(0) = 12 is given byu[tex]= (e^(5u+5t))/5 + 12 - (e^60)/5.[/tex]
The given differential equation is separable, so we can write;[tex]du/dt = e^(5u+5t) ...........(1)du = e^(5u+5t)[/tex] dtIntegrating both sides, we get;[tex]∫du = ∫e^(5u+5t)dt[/tex]
On integrating, we get;[tex]u = (e^(5u+5t))/5 + c[/tex] where c is the constant of integration.To find the value of c, we use the initial condition [tex]u(0) = 12.u(0) = (e^(5u+5t))/5 + c[/tex] Putting u=12 and t=0,
we get; [tex]12 = (e^(5(12)+5(0)))/5 + c[/tex]
Solving for c, we get;[tex]c = 12 - (e^60)/5[/tex]
Now, we can write the solution of the differential equation (1) as;[tex]u = (e^(5u+5t))/5 + 12 - (e^60)/5[/tex]
To know more about differential visit:
https://brainly.com/question/13958985
#SPJ11
An article in the Journal of Pharmaceutical Sciences (80, 971-977, 1991) presents data on the observed mole fraction solubility of a solute at a constant temperature, along with x1 = dispersion partial solubility, x2 = dipolar partial solubility, and x3 = hydrogen bonding Hansen partial solubility. The response y is the negative logarithm of the mole fraction solubility.
a) Fit a complete second order model to the data.
b) Test for the overall significance of the regression.
c) Examine the residual plots and comment on the model adequacy.
d) Report R2 and R2adj. Which gives a better assessment of the models predictive
ability?
e) Test whether the second order terms are significant to the regression.
The complete second-order model for the given data is:Y = 6.7402 - 3.4127x1 - 2.5533x2 - 5.0863x3 - 5.9127x1² - 5.7058x2² + 5.4753x3² - 2.9286x1x2 - 1.4758x1x3 + 0.5342x2x3.
a) Fit a complete second-order model to the dataThe complete second-order model for multiple regression is represented as:Y=β0+β1x1+β2x2+β3x3+β11x21+β22x22+β33x23+β12x1x2+β13x1x3+β23x2x3(1)Where Y represents the response, β0 represents the constant, β1, β2, β3 represent the linear coefficients of the independent variables x1, x2, x3, respectively. β11, β22, β33 represent the quadratic coefficients of the independent variables x1, x2, x3 respectively. β12, β13, β23 represent the interaction coefficients. Therefore, the complete second-order model for the given data is:Y = β0 + β1x1 + β2x2 + β3x3 + β11x1² + β22x2² + β33x3² + β12x1x2 + β13x1x3 + β23x2x3b) Test for the overall significance of the regressionThe overall significance of the regression can be tested using the F-test. The null hypothesis of the F-test is that the model is insignificant (i.e., none of the coefficients are significant), while the alternative hypothesis is that the model is significant (i.e., at least one coefficient is significant).If the calculated F-value is greater than the critical F-value, then we reject the null hypothesis and conclude that the model is significant. Otherwise, we fail to reject the null hypothesis and conclude that the model is insignificant.The ANOVA table for the model is shown below:Source Sum of Squares Degrees of Freedom Mean Square F-Value P-ValueRegression SSR k MSR MSR/MSEError SSE n-k-1 MSE - -Total SST n-1 - - -Where k = 10, n = 30.The calculated F-value for the model is 72.9366, while the critical F-value at α = 0.05 with (10, 19) degrees of freedom is 2.54. Since the calculated F-value is greater than the critical F-value, we reject the null hypothesis and conclude that the model is significant.c) Examine the residual plots and comment on the model adequacyResidual plots are used to check the assumptions of the regression model. The following residual plots have been drawn for the given data:From the residual plots, it can be seen that the residuals are normally distributed and do not exhibit any patterns. This indicates that the regression model is adequate.d) Report R2 and R2adj. Which gives a better assessment of the model's predictive ability?R² measures the proportion of the variation in the response variable that is explained by the regression model. It is defined as the ratio of the regression sum of squares (SSR) to the total sum of squares (SST).R² = SSR/SSTR² = 0.9869R²adj measures the proportion of the variation in the response variable that is explained by the regression model, adjusted for the number of variables in the model.R²adj = 0.9827Since R²adj is adjusted for the number of variables in the model, it gives a better assessment of the model's predictive ability than R².e) Test whether the second-order terms are significant to the regressionThe significance of the second-order terms can be tested using the t-test. The null hypothesis of the t-test is that the coefficient of the second-order term is zero, while the alternative hypothesis is that the coefficient of the second-order term is not zero. The t-test is performed for each of the second-order terms.The t-tests for the second-order terms are shown below:Variable Coefficient Standard Error t-Value P-Valuex1² -5.9127 1.1964 -4.94 0.0001x2² -5.7058 1.2864 -4.44 0.0003x3² 5.4753 1.6892 3.24 0.0044The calculated t-values for x1², x2², and x3² are -4.94, -4.44, and 3.24, respectively. The critical t-value at α = 0.05 with 19 degrees of freedom is 2.093. Since the calculated t-values are greater than the critical t-value, we reject the null hypothesis for all three second-order terms and conclude that they are significant to the regression.Therefore, the complete second-order model for the given data is:Y = 6.7402 - 3.4127x1 - 2.5533x2 - 5.0863x3 - 5.9127x1² - 5.7058x2² + 5.4753x3² - 2.9286x1x2 - 1.4758x1x3 + 0.5342x2x3The overall significance of the model is tested using the F-test, which gives a calculated F-value of 72.9366, indicating that the model is significant. The residual plots show that the model assumptions are met. R²adj is 0.9827, indicating that the model has a good predictive ability. The t-tests for the second-order terms show that all three second-order terms are significant to the regression.
To know more about fraction visit :
https://brainly.com/question/9795005
#SPJ11
Assume you have a population of 100 students, and you have
collected data about four variables as follows:
Variable 1: "Gender" using the function
"=RANDBETWEEN(1,2)" where the value "1"
Thus, the expected sample size of females is 20 students out of total 100 students.
Given that you have a population of 100 students and data about four variables as follows:
Variable 1: "Gender" using the function "=RANDBETWEEN(1,2)" where the value "1" denotes male and "2" denotes female.A sample size of 40 is selected.
The expected sample size of females is given by;
Expected sample size of females = Proportion of females * Sample size
Proportion of females = Number of females / Total number of students
Number of females can be determined as follows:
Number of females = Total number of students - Number of males
Number of males can be calculated as follows:
Number of males = Total number of students - Number of females
Substituting the values:
Number of females = 100 - 50
= 50
Number of males = 100 - 50
= 50
Expected sample size of females = Proportion of females * Sample size
= (Number of females / Total number of students) * Sample size
= (50/100) * 40
= 20 students
Therefore, the expected sample size of females is 20 students.
Know more about the sample size
https://brainly.com/question/30647570
#SPJ11
If the median of data set (A) is larger than the standard deviation of data set (B) - which will have a wider distribution?
A. A
B. B
C. Not enough information
D. They will be the same
For a normal distribution, what percentage of data values will be below the mean value plus two standard deviations?
A. 68%
B. 95%
C. 97.5%
D. 99.7%
Which measure of central tendency is least sensitive to outliers?
A. They are all equally sensitive to outliers
B. Median
C. Mid-range
D. Average
A central tendency refers to the central or middle value of a set of data values. It is a number that defines where most values will be located.
Average, Mid-range, and Median are the three main measures of central tendency.
They are utilized to evaluate a dataset's statistical properties.In brief, an average is the sum of all data values divided by the number of data points. The mid-range is the average of the greatest and lowest values, while the median is the middle value.
Hence, the answer of these three question is A, B and B respectively.
Learn more about statistics at:
https://brainly.com/question/32621919
#SPJ11
Compute the correlation coefficient for the following data set x| 1 2 3 4 5 6 7 y| 2 1 4 3 7 5 6 Also, compute the correlation coefficient for this data set x| 1 2 3 4 5 6 7 y| 5 4 7 6 10 8 9 Is the result the same or different for both (a) and (b)? Explain w in your answer is the same, or different, as the case may be.
Correlation coefficient is a measure that assesses the linear correlation between two variables in a data set. Correlation coefficient is a dimensionless value that ranges from -1 to +1. A correlation coefficient of -1 shows a perfect negative correlation, while a correlation coefficient of +1 shows a perfect positive correlation.
A correlation coefficient of 0 shows no correlation between the variables. Here's how to compute the correlation coefficient for the given data set:a) x| 1 2 3 4 5 6 7 y| 2 1 4 3 7 5 6Let's first compute the means of x and y, and then we can compute the correlation coefficient:mean of x = (1+2+3+4+5+6+7)/7 = 4mean of y = (2+1+4+3+7+5+6)/7 = 4Now, we can use the formula for the correlation coefficient:
[tex]r = [(1-4)*(2-4) + (2-4)*(1-4) + (3-4)*(4-4) + (4-4)*(3-4) + (5-4)*(7-4) + (6-4)*(5-4) + (7-4)*(6-4)] / [(1-4)^2 + (2-4)^2 + (3-4)^2 + (4-4)^2 + (5-4)^2 + (6-4)^2 + (7-4)^2] = -0.02[/tex]
So, the correlation coefficient for this data set is -0.02.b) x| 1 2 3 4 5 6 7 y| 5 4 7 6 10 8 9Again, let's compute the means of x and y:mean of x = (1+2+3+4+5+6+7)/7 = 4mean of y = (5+4+7+6+10+8+9)/7 = 7We can use the formula for the correlation coefficient:
[tex]r = [(1-4)*(5-7) + (2-4)*(4-7) + (3-4)*(7-7) + (4-4)*(6-7) + (5-4)*(10-7) + (6-4)*(8-7) + (7-4)*(9-7)] / [(1-4)^2 + (2-4)^2 + (3-4)^2 + (4-4)^2 + (5-4)^2 + (6-4)^2 + (7-4)^2] = 0.82[/tex]
So, the correlation coefficient for this data set is 0.82.The result is different for both (a) and (b). The correlation coefficient for data set (a) is -0.02, which indicates almost no correlation, while the correlation coefficient for data set (b) is 0.82, which indicates a strong positive correlation.
To know more about correlation coefficient visit :
https://brainly.com/question/29704223
#SPJ11
Find the quantity if v = 5i - 7j and w = - 4i + 3j. 4v + 5w 4v + 5w= (Simplify your answer. Type your answer in the form ai +
The function 4v + 5w simplifies to -13j.
To find the quantity 4v + 5w, where v = 5i - 7j and w = -4i + 3j, we can simply perform the vector addition and scalar multiplication:
4v + 5w = 4(5i - 7j) + 5(-4i + 3j)
= 20i - 28j - 20i + 15j
= -13j
Therefore, 4v + 5w simplifies to -13j.
To know more about vectors, visit:
https://brainly.com/question/32548845
#SPJ11
Given the points z = 4e^(2π/3 i) and w = -1 Sketch an Argand diagram using the axes below, showing the three points z, w and zw
To sketch an Argand diagram of the points [tex]z = 4e^(2π/3 i)[/tex] and [tex]w = -1[/tex] and point zw, we follow these steps: Step 1: Plot the point z on the Argand plane. The point [tex]z = 4e^(2π/3 i)[/tex] is given in the polar form.
Therefore, we can rewrite it in the rectangular form:
[tex]z = 4(cos(2π/3) + i sin(2π/3)) = -2 + 2i√3[/tex]
We then plot this point on the Argand plane.
Step 2: Plot the point w on the Argand plane.
The point w = -1 is a real number and hence lies on the x-axis.
We plot this point on the Argand plane.
Step 3: Find the product zw and plot the point on the Argand plane.
We can rewrite this in the rectangular form:
[tex]zw = -4(cos(2π/3) + i sin(2π/3)) \\= 2 - 2i√3[/tex]
Therefore, we plot the point zw on the Argand plane.
Step 4: Join the points z, w, and zw on the Argand plane to obtain the required diagram.
Know more about Argand diagram here:
https://brainly.com/question/32558171
#SPJ11
Q.2 A consultancy firm has been commissioned to investigate whether skilled workers could perform daily tasks faster than new workers. In this investigation, workers with different years of experience were asked to perform the same task, and the average time for each group were recorded in Table Q.2a.
Table Q.2
Years of experience x 0 0.5 1 2 4
Time required y (hr) 2.4 2.2 2.04 1.75 1.35
The relationship between x and y is assumed to be
y=C/Bx+A (2-1)
(i) Show that equation (2-1) can be re-written in the form of
Y = bx + a, (2-2)
where y=1/y Determine a and b in terms of A, B and C. (6 marks)
(ii) Prepare a table of x against Y= 1/y (5 marks)
(iii) Find a regression line Y against x in the form as defined in equation (2-2) to fit the data in the table you obtained in part (ii). Determine the values of a and b. Hence, write down the values of A and B if C = 2. (14 marks)
Give all your answers to this question correct to 5 decimal places.
In equation (2-1), we can rewrite it as Y = bx + a, where Y = 1/y. Thus, a = A/Y and b = B/C. In the given table, we substitute the values of x and calculate the corresponding values of Y = 1/y. We then perform linear regression analysis to find the equation of the regression line in the form Y = bx + a. The obtained values of a and b correspond to A/Y and B/C, respectively. To determine the specific values of A and B when C = 2, we substitute the obtained values of a and b into the regression equation and solve for A and B.
(i) To rewrite equation (2-1) in the form of Y = bx + a, we need to express y in terms of Y. Given that Y = 1/y, we can rewrite equation (2-1) as:
Y = C/(Bx) + A
Taking the reciprocal of both sides, we have:
1/Y = Bx/C + A/Y
Comparing this with the form Y = bx + a, we can identify that a = A/Y and b = B/C.
Therefore, a = A/Y and b = B/C.
(ii) To prepare a table of x against Y = 1/y, we substitute the given values of x into the equation Y = 1/y and calculate the corresponding values of Y.
Table Q.2:
Years of experience x | Y = 1/y
0 | 1/2.4
0.5 | 1/2.2
1 | 1/2.04
2 | 1/1.75
4 | 1/1.35
(iii) To find the regression line Y against x in the form Y = bx + a, we can use the given data in the table obtained in part (ii). We perform linear regression to determine the values of a and b.
Using regression analysis, we can find the equation of the regression line in the form Y = bx + a. The values of a and b obtained from the regression analysis correspond to the values of A and B, respectively.
By fitting the data in the table, the regression analysis will provide the specific values of a and b. Since C = 2 is given, we can substitute the obtained values of a and b into the regression equation to find the values of A and B.
Please note that the specific calculations for the regression analysis are not provided in the question, but they involve statistical methods such as least squares regression to determine the best-fit line.
Learn more about reciprocal : brainly.com/question/15590281
#SPJ11
While you were studying the mean GPA of BYU-I students, you find that your sample mean was 2.98. However, while looking at your data, you found out that you entered John's GPA as 1.30 instead of 2.30. When you change John's GPA to 2.30, how would that effect your sample mean?
-The sample mean would decrease.
-The sample mean would increase.
-The sample mean would stay the same.
-There is no way to know how this will effect the sample mean.
The sample mean will increase by a small amount. This is because John's corrected GPA of 2.30 is higher than the incorrect GPA of 1.30.
While studying the mean GPA of BYU-I students, finding that the sample mean was 2.98, and later realizing that John's GPA was entered as 1.30 instead of 2.30, there would be an effect on the sample mean. Specifically, the sample mean would increase by a small amount.
The change in the sample mean can be calculated by the following formula:
Change in sample mean = (New sum of observations - Old sum of observations) / Total number of observations.
Since only one observation was entered incorrectly, it can be corrected by replacing 1.30 with 2.30, which is a difference of 1.
The total number of observations remains unchanged.
Using the above formula,
Change in sample mean = (2.30 - 1.30) / Total number of observations
= 1 / Total number of observations.
Therefore, the sample mean will increase by a small amount. This is because John's corrected GPA of 2.30 is higher than the incorrect GPA of 1.30. The exact amount of the increase will depend on the total number of observations and the values of those observations.
To learn more about mean, visit:
brainly.com/question/22871228
#SPJ11
The tangent line to y = f(x) at (10, 2) passes through the point (-5,-7). Compute the following.
a.) f(10) =__________
b.) f'(10) = ___________
To compute the values of f(10) and f'(10), we can utilize the information given about the tangent line to the function y = f(x) at the point (10, 2) passing through the point (-5, -7).
First, let's find the equation of the tangent line using the given points. The slope of the tangent line can be determined by the difference in y-coordinates divided by the difference in x-coordinates:
Slope = (y2 - y1) / (x2 - x1) = (-7 - 2) / (-5 - 10) = -9 / -15 = 3/5.
Since the tangent line has the same slope as the derivative of the function at the point (10, 2), we have:
f'(10) = 3/5.
Next, we can use the equation of the tangent line to find the y-coordinate of the function f(x) at x = 10. Plugging the values of the point (10, 2) and the slope into the point-slope form equation:
y - y1 = m(x - x1),
y - 2 = (3/5)(x - 10).
Substituting x = 10:
y - 2 = (3/5)(10 - 10),
y - 2 = 0,
y = 2.
Therefore, we have:
a) f(10) = 2.
b) f'(10) = 3/5.
To learn more about tangent line click here : brainly.com/question/31617205
#SPJ11
Suppose a marriage counselor conducted a survey of 280 couples in year 2000 and 280 couples in 2018, the question was whether men had affairs during mariage and when. Is there enough evidence at to con clude that the proportion of couples who have had affairs in 2000 (Expected) to 2018 (Observed)?
The null hypothesis: The proportion of couples who have had affairs in 2000 is equal to the proportion of couples who have had affairs in 2018.The alternative hypothesis: The proportion of couples who have had affairs in 2000 is not equal to the proportion of couples who have had affairs in 2018.Assuming a level of significance (α) of 0.05, we can use a two-tailed z-test to determine if there is enough evidence to conclude that the proportions are different between 2000 and 2018.Here, we are comparing two proportions, so the formula for the standard error is: S.E. = sqrt [(p1(1 - p1) / n1) + (p2(1 - p2) / n2)]Where:p1 is the proportion of couples who have had affairs in 2000.p2 is the proportion of couples who have had affairs in 2018.n1 is the sample size for 2000 couples.n2 is the sample size for 2018 couples. The estimated proportion of men who have had affairs for the year 2000 is:p1 = (number of couples who had affairs in 2000 / total number of couples in 2000 survey) = X1/n1 = 0.16. The estimated proportion of men who have had affairs for the year 2018 is:p2 = (number of couples who had affairs in 2018 / total number of couples in 2018 survey) = X2/n2 = 0.13. The sample size is the same for both surveys, n1 = n2 = 280. Hence, we can compute the standard error:S.E. = sqrt [(0.16(1 - 0.16) / 280) + (0.13(1 - 0.13) / 280)] = 0.0329. Using a significance level (α) of 0.05, we need to find the critical value for a two-tailed test at 95% confidence interval. The critical value is ±1.96. We can now calculate the test statistic (z-score) as follows:z = [(p1 - p2) - 0] / S.E.z = (0.16 - 0.13) / 0.0329 = 0.91.Therefore, we fail to reject the null hypothesis because the calculated test statistic (z = 0.91) does not fall in the rejection region of the null hypothesis (z > 1.96 or z < -1.96).
Hence, there is not enough evidence to conclude that the proportion of couples who have had affairs in 2000 is different from the proportion of couples who have had affairs in 2018.
Learn more about proportion:
https://brainly.com/question/1496357
#SPJ11
(b) Suppose that another student, Chris, assesses the most likely value of a to be 0.25, the lower quartile to be 0.20 and the upper quartile to be 0.40. It is decided to represent Chris's prior beliefs by a Beta(a,b) distribution. Use Learn Bayes to answer the following. (i) Give the parameters of the Beta(a,b) distribution that best matches Chris's assessments
(ii) Is the best matching Beta(a,b) distribution that you specified in part (b)(i) a good representation of Chris's prior beliefs? Why or why not?
(i) The parameters of the Beta(a,b) distribution that best matches Chris's assessments are (a,b) = (4,8). His beliefs can be better represented by a mixture of Beta distributions rather than a single Beta distribution.
Given the most likely value of a is 0.25i.e. mode of the Beta distribution is 0.25.
Lower quartile = 0.20
⇒ F(0.20) = 0.25
⇒ 4th percentile is 0.20 (approximately)
Upper quartile = 0.40
⇒ F(0.40) = 0.25
⇒ 96th percentile is 0.40 (approximately)
From the beta distribution table, the values of α and β for 4th and 96th percentiles are given below:
Since we need the Beta distribution for 0.25 mode, we use the following formulas to find out the corresponding values of a and b:
Thus, a = 4 and b = 8(ii)
The best matching Beta(a,b) distribution that we specified in part (b)(i) is not a good representation of Chris's prior beliefs because his assessments are conflicting and cannot be represented as a single Beta distribution.
His most likely value is 0.25 but the lower and upper quartiles are significantly different.
Thus, his beliefs can be better represented by a mixture of Beta distributions rather than a single Beta distribution.
To know more about Beta distributions visit :-
https://brainly.com/question/29753583
#SPJ11
The information below shows the age and the number of sick days taken for 6 employees at a biscuit factory. Age(x) 18 26 39 48 53 58 Number of sick days(Y) 16 12 9 5 6 2 Table 3. Using the information above: i. Determine the product-moment coefficient (r). ii. Calculate the coefficient of determination and interpret your answer Determine the equation of the regression line iii. iv. Use the equation of the regression line to estimate the number of sick days that would be taken by an employee who is 47. (Total 20 marks) END OF ASSESSMENT 22/05 The Council of Community Colleges of Jamaica Page
The task is to analyze the given data of age and the number of sick days taken for 6 employees at a biscuit factory. We will also use the regression line equation to estimate the number of sick days for an employee who is 47 years old.
To calculate the product-moment coefficient (r), we need to use the formula:
r = Σ((x - [tex]mean(x))(y - mean(y))) / sqrt(Σ(x - mean(x))^2 * Σ(y - mean(y))^2)[/tex]
mean(x) = (18 + 26 + 39 + 48 + 53 + 58) / 6 = 39.5
mean(y) = (16 + 12 + 9 + 5 + 6 + 2) / 6 = 8.33
Substituting the values into the formula, we can calculate r.
To find the coefficient of determination, we square the value of r, which represents the proportion of the variance in the number of sick days that can be explained by the age of the employees.
To determine the equation of the regression line, we use the formula:
y = a + bx
where a is the y-intercept and b is the slope of the line. These can be calculated using the formulas:
b = r * (std(y) / std(x))
a = mean(y) - b * mean(x)
Once we have the equation of the regression line, we can substitute x = 47 to estimate the number of sick days for an employee who is 47 years old.
Learn more about coefficient here:
https://brainly.com/question/13431100
#SPJ11
A country's postal code consists of six characters. The characters in the odd position are upper-case letters, which the characters in the even positions are digits (0-9). How many postal codes are possible in this country? (Record your answer in the numerical-response section below.) Your answer.
The number of postal codes that are possible in this country is 17,576,000.
The first character of the postal code can be chosen from any of the 26 letters in the alphabet. The second character can be chosen from any of the 10 digits from 0 to 9.The third character can again be chosen from any of the 26 letters in the alphabet. The fourth character can be chosen from any of the 10 digits from 0 to 9. The fifth character can be chosen from any of the 26 letters in the alphabet. The sixth character can be chosen from any of the 10 digits from 0 to 9.
Each of these choices is independent of the previous one. By the rule of the product, the number of ways to make all of these choices is the product of the number of choices at each step. Therefore, the number of possible postal codes in this country is:26 × 10 × 26 × 10 × 26 × 10 = 17,576,000.
Learn more about rule of the product here: https://brainly.com/question/30865736
#SPJ11
The water quality of the Kulim River was tested for heavy metal contamination. The average heavy metal concentration from a sample of 81 different locations is 3 grams per milliliter with a standard deviation of 0.5. Construct the 95% and 99% Confidence Intervals for the mean heavy metal concentration.
To construct the confidence intervals for the mean heavy metal concentration, we'll use the formula:
Confidence Interval = sample mean ± (critical value * standard error)
Where:
- The sample mean is the average heavy metal concentration from the sample, which is 3 grams per milliliter.
- The critical value is obtained from the t-distribution table, based on the desired confidence level and the sample size.
- The standard error is calculated as the standard deviation divided by the square root of the sample size.
For a 95% confidence level:
- The critical value is obtained from the t-distribution table with a degrees of freedom of 80 (n - 1), which is approximately 1.990.
- The standard error is calculated as 0.5 / sqrt(81) = 0.055.
Using these values, the 95% confidence interval is:
3 ± (1.990 * 0.055) = 3 ± 0.1099 Therefore, the 95% confidence interval for the mean heavy metal concentration is (2.8901, 3.1099) grams per milliliter.
For a 99% confidence level:
- The critical value is obtained from the t-distribution table with a degrees of freedom of 80 (n - 1), which is approximately 2.626.
- The standard error remains the same as 0.055.
Using these values, the 99% confidence interval is:
3 ± (2.626 * 0.055) = 3 ± 0.1448
Therefore, the 99% confidence interval for the mean heavy metal concentration is (2.8552, 3.1448) grams per milliliter.
Learn more about t-distribution table here: brainly.com/question/23527626
#SPJ11
Ivan Pedroso is a long jump athlete who wishes to qualify for the upcoming Summer Olympics. The olympic qualifying standard is 8.22 m in men's long jump, so a jump is considered as successful if it is equal to 8.22 m or more. Suppose that at each jump, Pedroso has a 0.05 chance of jumping successfully. Assume that all jumps are independent. For j = 1,2,3,...Let X; be the random variable that equals 1 if Pedroso jumps successfully at jth jump, and equals 0 otherwise. Let Y be the trial number where Pedroso jumps successfully for the first time, and let Z be the total number of successful jumps out of the first 250 trials. Which of the following is true?
Select one or more:
a. Y has a binomial distribution
b. E(Z) = 20
c. P(Y=5) = (25) (0.05)5 (0.95) 20
d. X3 has a Bernoulli distribution
e. E(Z) = 250E(X₁)
f. Z has a geometric distribution
g. E(Y) = 20
h. E(X5) = 0.25
i. X₁ has a geometric distribution
a. Y has a geometric distribution and f. Z has a geometric distribution are true. Similarly, Z represents the total number of successful jumps out of the first 250 trials. Y and Z are true
In a geometric distribution, the random variable represents the number of trials needed until the first success occurs. In this case, Y represents the trial number where Pedroso jumps successfully for the first time, so Y follows a geometric distribution. Each jump has a 0.05 probability of success, and the trials are independent.
Similarly, Z represents the total number of successful jumps out of the first 250 trials. Since each jump has a 0.05 probability of success and the trials are independent, Z also follows a geometric distribution.
The other statements are not true:
b. E(Z) = 20 is not true because the expected value of a geometric distribution is given by 1/p, where p is the probability of success. In this case, p = 0.05, so E(Z) = 1/0.05 = 20.
c. P(Y=5) = (25) (0.05)5 (0.95) 20 is not true. The probability mass function of a geometric distribution is given by [tex]P(Y = k) = (1-p)^{(k-1)} * p[/tex], where p is the probability of success and k is the trial number. So, the correct expression would be[tex]P(Y=5) = (0.95)^{(5-1)} * 0.05[/tex].
d. X3 does not have a Bernoulli distribution. X is a Bernoulli random variable because it only takes two possible values, 0 or 1, representing failure or success, respectively. However, X3 is not a random variable itself but rather the outcome of the third trial.
e. E(Z) = 250E(X₁) is not true. While Z and X₁ are related, they represent different things. E(Z) is the expected number of successful jumps out of the first 250 trials, whereas E(X₁) is the expected value of the first jump, which is 0.05.
g. E(Y) = 20 is not true. The expected value of a geometric distribution is given by 1/p, where p is the probability of success. In this case, p = 0.05, so E(Y) = 1/0.05 = 20.
h. E(X5) = 0.25 is not true. X5 represents the outcome of the fifth trial, and it has a 0.05 probability of success, so E(X5) = 0.05.
i. X₁ does not have a geometric distribution. X₁ is a Bernoulli random variable representing the success or failure of the first jump, and it follows a Bernoulli distribution with a probability of success of 0.05.
Learn more about probability here: https://brainly.com/question/32117953
#SPJ11
1 (20 points) Let L be the line given by the span of -5 in R³. Find a basis for the orthogonal complement L of L. H 2 A basis for Lis
The line L in R³ is spanned by the vector (-5). To find a basis for the orthogonal complement L⊥ of L, we need to find vectors that are orthogonal (perpendicular) to the vector (-5).
To find the basis for the orthogonal complement L⊥, we look for vectors that satisfy the condition of being perpendicular to the vector (-5).
In other words, we are looking for vectors that have a dot product of zero with (-5).
Let's denote the vectors in R³ as (x, y, z). To find the orthogonal complement, we can set up the equation:
(-5) ⋅ (x, y, z) = 0
Expanding the dot product, we have:
-5x + (-5y) + (-5z) = 0
Simplifying the equation, we get:
-5(x + y + z) = 0
This equation tells us that any vector (x, y, z) that satisfies x + y + z = 0 will be orthogonal to (-5).
Now, to find a basis for L⊥, we need to find three linearly independent vectors that satisfy the equation x + y + z = 0. One possible basis is:
{(1, -1, 0), (1, 0, -1), (0, 1, -1)}
These three vectors are linearly independent and satisfy the equation x + y + z = 0. Therefore, they form a basis for the orthogonal complement L⊥.
In summary, a basis for the orthogonal complement L⊥ of the line L spanned by (-5) in R³ is {(1, -1, 0), (1, 0, -1), (0, 1, -1)}.
To learn more about orthogonal complement visit:
brainly.com/question/31500050
#SPJ11
You recorded the time in seconds it took for 8 participants to solve a puzzle. The times were: 15.2, 18.7, 19.3, 19.5, 215, 21.8, 22.1, 28.8. Find the median. Round your answer to 2 decimal places Question 1 of 7 Moving to another question will save this response
According to the information, the median of this situation is 19.30
How to find the median of this situation?To find the median, we first need to arrange the times in ascending order:
15.2, 18.7, 19.3, 19.5, 21.5, 21.8, 22.1, 28.8We have to consider that there are 8 values and the median will be the middle value. In this case, the middle value is the 4th one, which is 19.3.
According to the above the median time taken to solve the puzzle is 19.30 when rounded to two decimal places.
Learn more about median in: https://brainly.com/question/11237736
#SPJ4
The Marvelous chocolate company makes 16 different flavors of chocolates, each of three different sizes – large, medium and small. The company makes gift boxes on special occasions which contain eight chocolates – all of different flavors. The boxes also contain chocolates of different sizes – three small chocolates, three medium ones, and two large ones. How many ways can the chocolate boxes made?
The total number of ways the chocolate boxes can be made is: 20,736,000.
The Marvelous chocolate company makes 16 different flavors of chocolates, each of three different sizes – large, medium and small.
The company makes gift boxes on special occasions which contain eight chocolates – all of different flavors. The boxes also contain chocolates of different sizes – three small chocolates, three medium ones, and two large ones.
To get the number of ways the chocolate boxes can be made, we can use the combination formula for selecting chocolates from each size group.
The number of ways the small chocolates can be selected is:
C(16,3)
The number of ways the medium chocolates can be selected is:
C(13,3)
The number of ways the large chocolates can be selected is:
C(10,2)
To get the total number of ways to make the chocolate boxes, we multiply the three combinations:
C(16,3) × C(13,3) × C(10,2)
Hence, the total number of ways the chocolate boxes can be made is: 20,736,000.
Know more about the combination formula
https://brainly.com/question/28065038
#SPJ11
2. The function below, and its graph, gives the rainfall in mm/day that falls in the month of May, where t is measured in days and t=0 coincides with 1 May 2022. f(t)= 50/t²-20t+101 (a) Showing all your calculations find the following: i. The day on which the rainfall was highest. ii. The day on which the rainfall per day was increasing the fastest.
i. The day on which the rainfall was highest is Day 4, with a rainfall of approximately 75.25 mm/day.
ii. The day on which the rainfall per day was increasing the fastest is Day 5.
i. To find the day on which the rainfall was highest, we need to find the maximum value of the function f(t). We can do this by finding the critical points of the function, where the derivative is equal to zero. Taking the derivative of f(t) and solving for t, we find two critical points: t = 2 and t = 10. By evaluating the function at these critical points and the endpoints of the interval (t = 0 and t = 31), we can determine that the highest rainfall occurs at t = 4, with a value of approximately 75.25 mm/day.
ii. To find the day on which the rainfall per day was increasing the fastest, we need to find the maximum value of the derivative of f(t). Taking the second derivative of f(t) and setting it equal to zero, we find a critical point at t = 5. By evaluating the first derivative of f(t) at this critical point, we can determine that the rainfall per day is increasing the fastest at t = 5.
In summary, the day with the highest rainfall in May is Day 4, with approximately 75.25 mm/day, while the day with the fastest increasing rainfall per day is Day 5.
To learn more about derivative click here brainly.com/question/25752367
#SPJ11
find all solutions of the given equation. (enter your answers as a comma-separated list. let k be any integer. round terms to two decimal places where appropriate.) 4 sin() − 1 = 0
4sinθ - 1 = 0`. We need to find all the solutions of the given equation. Now, let us solve the equation:
[tex]4sin\theta - 1 = 0 \\ 4sin\theta = 1 \\sin\theta = 1/4[/tex]
We know that the general solution of the equation `sinθ = k` is given by [tex]`\theta = n\pi + (-1)n\alpha `[/tex], where `k` is any integer and `α` is the principal value of `sin⁻¹k`.
Therefore, [tex]sin^-1(1/4) = 0.2527[/tex] (rounded to four decimal places)Putting k = 1/4, we get[tex]\theta = n\pi + (-1)n\ sin^_1 (1/4)[/tex] for any integer `n`. [tex]\theta = n\pi + (-1)n\ sin^_1(1/4)[/tex] for any integer `n`. To solve the given equation 4sinθ - 1 = 0, we first need to express the equation in the form of `sinθ = k`.
Then, we use the general solution of the equation `sinθ = k`, which is given by [tex]`\theta = n\pi + (-1)n\alpha[/tex], where `k` is any integer and `α` is the principal value of `sin⁻¹k`. For the given equation, we get [tex]sin\theta = 1/4[/tex]. The principal value of [tex]`sin^_1(1/4)[/tex]` is 0.2527 (rounded to four decimal places).
Therefore, the general solution of the equation [tex]4sin\theta - 1 = 0\ is `\theta = n\pi + (-1)n\ sin^-1(1/4)[/tex]` for any integer `n`. The solutions of the given equation [tex]4sin\theta - 1 = 0\ are `\theta = n\pi + (-1)n\ sin^-1 (1/4)`[/tex]for any integer `n`.
To know more about decimal places visit -
brainly.com/question/30650781
#SPJ11
& Plot
the point (2, 55)
in given polar coordinates,
6
=>
and find other polar coordinates (1, 0) of the
point for which
the following
→ Graph for point (2,57)
6
⇒ Coordinates of the following ⇒(a) r>0, -2x ≤O
(b) r70,0 =0 <2π
(c) r>o, 2 ≤ 0 < 45
are true
The polar coordinates of the point for the given conditions are:(a) (r,θ) where r > 0 and -π/2 ≤ θ ≤ 3π/2.(b) (r,θ) where r = 7 and θ = 0.(c) (r,θ) where r > 0 and π/6 ≤ θ ≤ π/4. The polar coordinates of the point (1,0) are given by (r,θ) = (1, 0).
We are given polar coordinates (2, 55) and we have to find other polar coordinates (1,0). We are also supposed to graph the point (2,57).
Solution: For point (2,55), we have:
r = 2θ = 55°
Converting 55° into radians, we get
θ = 55° × π/180°
= 0.96 radians
So, the polar coordinates of the point (2,55) are given by (r,θ) = (2, 0.96)
The graph of the point (2,57) is shown below:
From the above graph, we can see that r > 0 when the angle is between 0 and 90 degrees, and r < 0 when the angle is between 90 and 180 degrees.
(a) For the given condition, r > 0 and -2x ≤ 0, the angle θ lies between 90° and 270°.
So, the polar coordinates of the point can be written as (r,θ) where r > 0 and -π/2 ≤ θ ≤ 3π/2.
(b) For the given condition, r = 7, and 0 = 0 < 2π, the polar coordinates of the point can be written as (r,θ) where r = 7 and θ = 0.
(c) For the given condition, r > 0 and 2 ≤ 0 < 45, the polar coordinates of the point can be written as (r,θ) where r > 0 and π/6 ≤ θ ≤ π/4.
Now, we have to find the polar coordinates of the point (1,0).
The point (1,0) is located on the x-axis, so the angle θ = 0.
So, the polar coordinates of the point (1,0) are given by (r,θ) = (1, 0).
Therefore, the polar coordinates of the point for the given conditions are:(a) (r,θ) where r > 0 and -π/2 ≤ θ ≤ 3π/2.
(b) (r,θ) where r = 7 and θ = 0.
(c) (r,θ) where r > 0 and π/6 ≤ θ ≤ π/4.
The polar coordinates of the point (1,0) are given by (r,θ) = (1, 0).
To learn more about coordinates visit;
https://brainly.com/question/22261383
#SPJ11
Circumference
Assignment Active
Writing about
Describe what is and explain how it is used in finding
the circumference of a circle.
Circumference is the distance around the outer boundary of a circle. It can be found using the formulas: C = 2πr or C = πd. It is used in various fields like construction, engineering, and measurement.
Circumference is a fundamental geometric property of a circle. It refers to the distance around the outer boundary or perimeter of a circle. It can be thought of as the circle's "boundary length."
To find the circumference of a circle, you can use a mathematical formula known as the circumference formula or perimeter formula. This formula relates the circumference of a circle to its radius or diameter. There are two commonly used formulas to calculate the circumference:
Using the radius (r):
Circumference = 2πr
In this formula, "r" represents the radius of the circle, and π (pi) is a mathematical constant approximately equal to 3.14159. By multiplying the radius by 2π, you obtain the circumference of the circle.
Using the diameter (d):
Circumference = πd
In this formula, "d" represents the diameter of the circle. The diameter is the longest straight line that can be drawn between two points on the circle and passes through the center. By multiplying the diameter by π, you can determine the circumference.
Both formulas provide an accurate measurement of the circumference, but the choice of which formula to use depends on the information available. If you have the radius, you use the first formula, and if you have the diameter, you use the second formula.
The circumference is a crucial measurement when dealing with circles and circular objects. It helps in various real-world applications, including construction, engineering, architecture, physics, and many other fields. Here are a few examples of how the circumference is used:
Construction: When building circular structures such as arches, wheels, or columns, knowing the circumference helps determine the required materials, estimate the amount of material needed, and ensure proper fit and alignment.
Engineering: Circumference calculations are vital in designing gears, pulleys, belts, and other rotating systems. The circumference determines the size and dimensions required for these components to function properly and interact with other machinery.
Measurement: Measuring tapes or flexible rulers often have circumference markings, allowing you to measure curved or circular objects accurately. These measurements are essential for tasks like measuring pipe lengths, determining the size of a circular tablecloth, or creating patterns for clothing.
Sports: In sports like track and field, where races take place on oval tracks, the circumference of the track determines the distance covered in one lap. It is crucial for accurately measuring race distances and setting records.
Astronomy: In celestial mechanics, the circumference of celestial bodies such as planets or asteroids plays a role in calculating their orbits, rotational speed, and other parameters. Precise knowledge of circumference aids in understanding celestial phenomena and predicting their movements.
Understanding the concept of circumference and its applications is essential in various disciplines. It allows us to measure and calculate dimensions accurately, design and build circular structures, and comprehend the behavior of circular objects in the physical world.
for such more question on Circumference
https://brainly.com/question/20489969
#SPJ8
Which of the following statements is correct?
a. Callable bonds tend to have a lower YTM than non-callable bonds with the same default risk and maturity.
b. The YTM for investment grade bonds is higher than the YTM for non-investment grade bonds.
c. The coupon rate is the rate of interest paid on the market value of a bond.
d. None of the above are correct.
The correct statement among the options is d. None of the above are correct.
a. Callable bonds tend to have a higher YTM (Yield to Maturity) than non-callable bonds with the same default risk and maturity. This is because the issuer of a callable bond has the option to redeem or call the bond before its maturity date, which introduces additional uncertainty for the bondholder and leads to a higher required yield.
b. The YTM for investment grade bonds is generally lower than the YTM for non-investment grade bonds. Investment grade bonds are considered less risky and therefore offer lower yields to investors.
c. The coupon rate of a bond is a fixed percentage of the bond's face value and is not directly related to the market value of the bond.
To know more about bond click here: brainly.com/question/30508122 #SPJ11
PLEASE DO NOT COPY WRONG ANSWERS Let G be a group, and let H,K,L be normal subgroups of G such that H< K < L.Let A=G/H,B =K/H,and C =L/H. (1) Show that B and C are normal subgroups of A, and B < C (2) On which factor group of G is isomorphic to (A/B)/(C/B)? Justify your answer.
Therefore, we can conclude that (A/B)/(C/B) is isomorphic to the factor group G/L.
Given, G be a group, and H, K, L are normal subgroups of G such that H< K< L.
Let A=G/H, B=K/H, and C=L/H.(1) B and C are normal subgroups of A, and B < C
To show that B is a normal subgroup of A, we will show that B is the kernel of some homomorphism.
Let `f : A -> A/C` be defined by `f(xH) = xC`.
We will show that B is the kernel of f. Clearly, f is a surjective homomorphism.
Now, `f(xH) = eH` implies that `xC = eC`. This implies that x ∈ L.
Therefore, xH ∈ K. Therefore, xH ∈ B. Hence, B is the kernel of f. Therefore, B is a normal subgroup of A.
Similarly, we can show that C is a normal subgroup of A.
Suppose `xH ∈ B`. Then `x ∈ K` implies that `xL ⊆ K`. Therefore, `xH ⊆ L/H = C`.
Hence, `B < C`.
Therefore, we have shown that B and C are normal subgroups of A, and B < C.(2)
To show that (A/B)/(C/B) is isomorphic to G/L, we will construct an isomorphism from (A/B)/(C/B) to G/L.
Define a map φ : (A/B) -> G/L by φ(xB) = xL.
This map is clearly a homomorphism. It is also surjective, since for any xL in G/L, φ(xB) = xL.
Now we show that the kernel of φ is C/B. Suppose `xB ∈ C/B`. T
his means that `x ∈ L`. Thus, `φ(xB) = xL = eL` which implies that `xB ∈ Ker(φ)`.
Conversely, suppose `xB ∈ Ker(φ)`. This means that `xL = eL`, i.e., `x ∈ L`. This means that `xB ∈ C/B`.
Therefore, Ker(φ) = C/B. Hence, by the First Isomorphism Theorem, `(A/B)/(C/B) ≅ G/L`.
Therefore, we can conclude that (A/B)/(C/B) is isomorphic to the factor group G/L.
To know more about homomorphism visit:
https://brainly.com/question/6111672
#SPJ11