Answer:
Theoretical yield of CO₂ is 66 g
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated:
C + O₂ —> CO₂
Next, we shall determine the mass of C that reacted and the mass of CO₂ produced from the balanced equation. This can be obtained as follow:
Molar mass of C = 12 g/mol
Mass of C from the balanced equation = 1 × 12 = 12 g
Molar mass of CO₂ = 12 + (16×2)
= 12 +32
= 44 g/mol
Mass of CO₂ from the balanced equation = 1 × 44 = 44 g
SUMMARY:
From the balanced equation above,
12 g of C reacted to produce 44 g of CO₂.
Finally, we shall determine the theoretical yield of CO₂. This can be obtained as follow:
From the balanced equation above,
12 g of C reacted to produce 44 g of CO₂.
Therefore, 18 g of C will react to produce = (18 × 44)/12 = 66 g of CO₂.
Thus, the theoretical yield of CO₂ is 66 g.
Answer:
66 grams
Explanation:
Draw the atomic structure with electronic configuration of Potassium
Answer:
Explanation:
i try to help you
✧Kindly see the attached picture! ☄
♪ Hope I helped! ♡
[tex] \star[/tex] Best regards! ツ
☞ [tex] \underbrace{ \overbrace{ \mathfrak{Carry \: On \: Learning}}}[/tex] ✎
Dry air is 78.09% nitrogen, 20.95% oxygen, 0.93% argon, 0.039% carbon dioxide so varying amounts of water vapor- depending on humidity. Some gases however strongly absorb infrared radiation and trap it in the atmosphere and can therefore result in elevated global temperatures. Therefore they are termed greenhouse gases. Which greenhouse gas have we observed a marked increase in atmospheric concentrations in the last 100 years?
A. methane (CH4)
B. carbon monoxide
C. carbon dioxide
D.ozone (03)
E. oxygen
F. nitrogen
G.water vapor (H20)
Answer:
C. Carbon dioxide
Explanation:
Carbon dioxide is one of the end-product of combustion reactions involving many fuels today.
With the rapid increase in urbanization and technological development, man demand for energy increased tremendously. The discovery of fossil fuels paved the way for the astronomical increase in the concentration of carbon dioxide in the atmosphere. The burning of fossil fuels like coal and oil invovles the process where the carbon atoms present in these fuels combine with oxygen in the air to make CO2. This has resulted in an increase in the concentration of atmospheric carbon dioxide (CO2).
The burning fossil fuels for electricity, industry, heat, and transportation are the major sources of the emossion of carbon dioxide.
Also, the cutting down of trees for paper production, building construction and for the establishment of settlements also increase the concentration of carbon dioxide in the atmosphere. Trees are help remove carbon dioxide from the atmosphere through the process of photosynthesis. However, when these trees are cut down, carbon dioxide accumulates in the atmosphere.
Copper can be shaped into wires because it is
.ANSWER:Copper is a ductile metal
EXPLAIN :This means that it can easily be shaped into pipes and drawn into wires. Copper pipes are lightweight because they can have thin walls. They don't corrode and they can be bent to fit around corners.
Copper is a ductile metal due to ductility.This means that it can easily be shaped into pipes and drawn into wires. Copper pipes are lightweight because they can have thin walls.
Ductility is a mechanical property commonly described as a material's amenability to drawing (e.g. into wire).In materials science, ductility is defined by the degree to which a material can sustain plastic deformation under tensile stress before failure. Ductility is an important consideration in engineering and manufacturing. It defines a material's suitability for certain manufacturing operations (such as cold working) and its capacity to absorb mechanical overload.
Some metals that are generally described as ductile include gold and copper, while platinum is the most ductile of all metals in pure form.However, not all metals experience ductile failure as some can be characterized with brittle failure like cast iron. Polymers generally can be viewed as ductile materials as they typically allow for plastic deformation.
Learn more about ductility,here:
https://brainly.com/question/29416697
#SPJ6
Plzzzzz help... What causes specific lines to appear in a line spectrum?
Answer:
Spectral lines are produced by transitions of electrons within atoms or ions. As the electrons move closer to or farther from the nucleus of an atom (or of an ion), energy in the form of light (or other radiation) is emitted or absorbed.…
Explanation:
Specific lines appear in a line spectrum because produced by transitions of electrons within atoms or ions.
What are spectral lines?Spectral lines are produced when the electrons undergoes transitions within atoms or ions. When the electrons move far or near to nucleus of any atom, radiation of particular wavelength is emitted or absorbed.
These emitted light is represented as they are moving from one state to the another.
Thus, specific lines appear in a line spectrum because produced by transitions of electrons within atoms or ions.
Learn more about spectral lines.
https://brainly.com/question/27494244
#SPJ2
Which of the following is NOT correct about the mole concept?
1 point
1 mole of sodium atoms will ionize to produce 1 mole of sodium ions and 1 mole of
electrons
A mole is the number of carbon atoms in 12g of C-12 isotope.
A mole is the number of molecules in 22.4 dm3 of all gases at all temperatures and
pressures
A mole is the number of electrons that carry one Faraday of electricity
A mole is the number of molecules of water in 18 g of ice, water or water vapour
Answer:
a mole is the number of molecules in 22.4 dm³ for all gases at all temperatures and pressures
How many molecules are in 3 moles of CO2?
O A. 5.418 x 1024
OB. 1.806 x 1024
O C. 6.02 x 1024
O D. 1.806 x 1023
Answer:
1.806 × 10²⁴Explanation:
The number of molecules can be found by using the formula
N = n × L
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 3 × 6.02 × 10²³
We have the final answer as
1.806 × 10²⁴Hope this helps you
Answer: OB. 1.806 x 1024
Explanation:
Si-4) AN= 14 AM= 28
e= n=
Answer:
have a good day
Explanation:
What's the partial pressure of hydrogen in a gas mixture if its mole fraction is 0.1 and the total pressure is 325 torr?
Question 15 options:
325 torr
32.5 torr
100 torr
65 torr
Which of the following statements is true?
Answer:
option first is right answer
ASAP. Which process represents a physical change?
1.Roasting a marshmallow over a camp fire
2.Melting chocolate in a pan on the stove
3.Bruising of a banana's skin after dropping on the floor
4.Bubbling due to an antacid tablet in vinegar
What is the difference between 13.254 m/s and 7.7 m/s? Round your answer to the correct number of significant digits.
Answer:
5.6 m/s
Explanation:
Given,
First number = 13.254 m/s
Second number = 7.7 m/s
We need to find the difference between these two numbers. First we round off 13.254 to one decimal place i.e. 13.254 = 13.3 m/s
The difference between them is given by :
D = 13.3 - 7.7
= 5.6 m/s
Hence, the difference of the two numbers is 5.6 m/s.
if u mix 10ml of 70%ethanol with 20ml of 80% ethanol with 50ml water what is the concentration of the resulted solution
Answer:
29% is the final concentration
Explanation:
To solve this question we must find the volume of ethanol added and the volume of the whole solution. The concentration will be:
Volume ethanol / Total volume * 100
Volume ethanol:
10mL * 70% = 7mL ethanol
+
20mL * 80% = 16mL ethanol
= 23mL ethanol
Total volume:
10mL + 20mL + 50mL = 80mL
Concentration:
23mL / 80mL * 100
= 29% is the final concentration
A gas has a volume of 10 L at 200 K and a pressure of 1.5 atm . What would the volume of the gas be at 300 K and 2atm of pressure ?
Answer:
hi
Explanation:
I'm just figuring this out what am I doing
If 18.0 g of CO2 is produced in the reaction of C2H2 with O2 to form CO2 and
H2O, how many grams of H20 are produced in this reaction?
O 3.68 g
9.0 g
14.7 g
None of the above
7.37 g
Answer:
3.68 g
Explanation:
[tex]n_{CO2}[/tex] = 18 ÷ 44 = 0.4
2C2H2 + 5O2 → 4CO2 + 2H2O
2 : 5 : 4 : 2
0.409 (moles)
⇒ [tex]n_{H2O}[/tex] = 0.409 × 2 ÷ 4 = 0.2045 moles
⇒ [tex]m_{H2O}[/tex] = 0.2045 × 18 = 3.68 grams
What is the value of for this aqueous reaction at 298 K?
A+B↽⇀C+D ΔG°=12.86 kJ/mol
K=
Answer:
The equilbrium constant is 179.6
Explanation:
To solve this question we can use the equation:
ΔG = -RTlnK
Where ΔG is Gibbs free energy = 12.86kJ/mol
R is gas constant = 8.314x10⁻³kJ/molK
T is absolute temperature = 298K
And K is equilibrium constant.
Replacing:
12.86kJ/mol = -8.314x10⁻³kJ/molK*298K lnK
5.19 = lnK
e^5.19 = K
179.6 = K
The equilbrium constant is 179.6An aqueous solution was made by dissolving 0.543 g of an unknown, monoprotic acid into 25.00 mL of water in an Erlenmeyer flask. After an acid/base indicator was added, 41.21 mL of 0.150 M NaOH was used to reach the end point.
a)Find the molar mass of the acid.
b)Determine the identity of the acid based on the following data:
PLEASE HELP ME
Answer:
a. 87.8g/mol is the molar mass of the acid.
b. The answer is in the explanation.
Explanation:
To solve this question we must find the moles of the monoprotic acid using the reaction with NaOH (1mole of monoprotic acid reacts with 1 mole of NaOH). With the moles and the mass of the unknown we can find the molar mass.
Moles of NaOH added:
0.04121L * (0.150moles / L) = 6.1815x10⁻³ moles NaOH = Moles monoprotic acid
Molar mass is:
0.543g / 6.1815x10⁻³ moles = 87.8g/mol is the molar mass of the acid
b. I can't see the image you are giving because has a low resolution. But the identity of the acid can be obtained because the acid:
Has the same molar mass.
Is a monoprotic acid.
(a) The molecular mass of the unknown monoprotic acid will be 87.84 g/moles.
(b) The acid can be butyric acid, as it is a monoprotic and have mass near about 87.84 g/mol.
(a) The endpoint by the addition of NaOH has been reached when the monoprotic acid has been completely utilized. Since the NaOH has been monobasic. The moles of NaOH will be equal to the moles of acid.
Moles of NaOH = moles of acid
The molarity of NaOH = 0.15 M
Volume of NaOH = 41.21 ml
Molarity = [tex]\rm \dfrac{moles}{volume\;(L)}[/tex]
Moles = molarity [tex]\times[/tex] volume (L)
Moles of NaOH = 0.15 [tex]\times[/tex] 0.04121 L
Moles of NaOH = 0.00618 moles
Moles of NaOH = moles of acid
moles of acid = 0.00618 moles.
Mass of acid dissolved = 0.543 grams
Molecular weight of acid = [tex]\rm \dfrac{weight}{moles}[/tex]
Molecular weight of acid = [tex]\rm \dfrac{0.543}{0.006815}[/tex]
Molecular weight of acid = 87.84 g/moles.
(b) The acid with the molecular mass of 87.84 g/mol with being the monoprotic acid can be butyric acid. The butyric acid has a molecular weight of 88 g/mol.
For more information about monoprotic acid, refer to the link:
https://brainly.com/question/22497931
In order to determine the magnetic properties of phosphorus atom we need to find out the number of unpaired electrons present in the ground state of phosphorus atom! Select one of the answers below that represents this number.
Group of answer choices
1
4
3
0
2
Answer:
Think of it this way If you have a phosphorus atom whats its oposites once you found that out you may be able to find the answer
Explanation:
Hope this helps :)
What is the value of for this aqueous reaction at 298 K?
A+B↽⇀C+D
ΔG°=12.86 kJ/mol
K=
Answer:
Kc = 0.5951 (4 sig. figs.)
Explanation:
For A + B ⇄ C + D at standard thermodynamic conditions (298K, 1atm)
ΔG = ΔG° + R·T·lnQ => 0 = ΔG° + R·T·lnKc => ΔG° = - R·T·lnKc
=> lnKc = - ΔG°/R·T
ΔG° = +12.86 Kj/mol
R = 8.314 Kj/mol·K
T = 298K
lnKc = - (+12.86Kj) / (8.314Kj/mol·K)(298K) = - 0.519 mol⁻¹
Kc = e⁻⁰°⁵¹⁹ mol⁻¹ = 0.5957 mol⁻¹ (4 sig. figs.)
4 methyl 2 pentanone structural formula
Answer:
(CH3)2CHCH2COCH3
Explanation:
2. Why is it difficult for us to go up in a mountain than go down?
A We are moving against gravity
B. We are pulled by the wind
C. We are moving towards gravity.
D. None of the above
Farth
help
Answer:
We are moving against gravity
Calculate the amount (in moles) of magnesium in 1.23 g.
Answer
0.32 is that answer
Explanation:
you just use the calculator
How many miles of N are in 0.179g of N2O?
Answer:
8.14x10⁻³ moles of N
Explanation:
In order to solve this problem first we convert 0.179 grams of N₂O into moles, using its molar mass:
0.179 g ÷ 44 g/mol = 4.07x10⁻³ mol N₂OThen we convert N₂O moles into N moles, using the data given by the compound's formula (that there are two N moles per N₂O mol):
4.07x10⁻³ mol N₂O * [tex]\frac{2molN}{1molN_2O}[/tex] = 8.14x10⁻³ mol N1. Write formulas for the binary ionic compounds formed between
the following elements:
a. potassium and iodine d. aluminum and sulfur
b. magnesium and chlorine e. aluminum and nitrogen
C. sodium and sulfur
The formulas for the binary ionic compounds are:
a. potassium and iodine: KI.b. magnesium and chlorine: MgCl₂.c. sodium and sulfur: Na₂S.d. aluminum and sulfur: Al₂S₃.e. aluminum and nitrogen: AlN.We want to write the formulas of different binary ionic compounds. to do so, we need to consider the octet's rule.
What is the octet's rule?The octet's rule establishes that atoms will lose, gain or share electrons to achieve the electron configuration of the nearest noble gas (8 valence electrons except for He with 2).
a. potassium and iodineK has 1 valence electron so it will lose 1 electron to form K⁺. I has 7 valence electrons so it will gain 1 electron to form I⁻. The neutral compound between K⁺ and I⁻ is KI.
b. magnesium and chlorine
Mg has 2 valence electrons so it will lose 2 electrons to form Mg⁺². Cl has 7 valence electrons so it will gain 1 electron to form Cl⁻. The neutral compound between Mg⁺²⁺ and Cl⁻ is MgCl₂.
c. sodium and sulfur
Na has 1 valence electron so it will lose 1 electron to form Na⁺. S has 6 valence electrons so it will gain 2 electrons to form S⁻². The neutral compound between Na⁺ and S⁻² is Na₂S.
d. aluminum and sulfurAl has 3 valence electrons so it will lose 3 electrons to form Al³⁺. S has 6 valence electrons so it will gain 2 electrons to form S⁻². The neutral compound between Al³⁺ and S⁻² is Al₂S₃.
e. aluminum and nitrogenAl has 3 valence electrons so it will lose 3 electrons to form Al³⁺. N has 5 valence electrons so it will gain 3 electrons to form N³⁻. The neutral compound between Al³⁺ and N³⁻ is AlN.
The formulas for the binary ionic compounds are:
a. potassium and iodine: KI.b. magnesium and chlorine: MgCl₂.c. sodium and sulfur: Na₂S.d. aluminum and sulfur: Al₂S₃.e. aluminum and nitrogen: AlN.Learn more about binary compounds here: https://brainly.com/question/7960132
Muriatic acid is often used to remove rust. A solution of muriatic acid, HCl, reacts with Fe203 deposits on
industrial equipment. How many liters of 5.00 M HCl would be needed to react completely with 339 g
Fe203?
Answer:
2.54 L
Explanation:
Step 1: Write the balanced neutralization equation
6 HCl + Fe₂O₃ → 3 H₂O + 2 FeCl₃
Step 2: Calculate the moles corresponding to 339 g of Fe₂O₃
The molar mass of Fe₂O₃ is 159.69 g/mol.
339 g × 1 mol/159.69 g = 2.12 mol
Step 3: Calculate the moles of HCl that react with 2.12 moles of Fe₂O₃
The molar ratio of HCl to Fe₂O₃ is 6:1. The reacting moles of HCl are 6/1 × 2.12 mol = 12.7 mol
Step 4: Calculate the volume of HCl
12.7 moles are in 5.00 M (5.00 mol/L) HCl. The required volume is:
12.7 mol × 1 L/5.00 mol = 2.54 L
What is the pH of a solution that has a hydrogen ion concentration of 6.9*10^-4?
The pH would be 3.16 because the formula for finding the pH from a H± ion is pH = -log [H±]
So with that formula, you first have to substitute the H± with your numbers which in this case is 6.9 × 10^-4.
It should like this:
pH = -log (6.9 × 10^-4)
And lastly, just calculate.
pH = 3.16
Hope that helps, do let me know if you need more help in understanding this!
1) ____C3H8 + ____O2 → ____CO2 + ____H2O
The chemical formula for sodium citrate is Na3C6H5O7. Which statement is true? Sodium citrate is a compound with a total of 21 atoms. Sodium citrate is an element with a total of 21 atoms. Sodium citrate is a compound with a total of 4 atoms. Sodium citrate is a compound with a total of 21 atoms, each of a different element.
Answer:
Sodium citrate is a compound with a total of 21 atoms
Even when the temperature of a pan of water is less than the boiling point, water still evaporates. This is because
a. the speeds of individual molecules varies
b. conservation of energy
c. of convection
d. radiation
Explain the difference between a mixture of two substances and a chemical compound formed by them
Answer:
mixtures are physically combined structures that are separated into their original components. A chemical substance is composed of one type of atom or molecule. A mixture is composed of different types of atoms or molecules that are not chemically bonded.
Explain:
yw
ask your mom and your family
Ionisation enthalpy across the group (increase or decrease)
Give reasons??
Answer:
As we move from left to right across a period, the ionization energy of elements increases. This is due to the decrease in the size of atoms across a period.
Answer:
[tex]\huge\boxed{Answer\hookleftarrow}[/tex]
Ionization enthalpy (IE) is the energy required to remove the highest-energy electron from a neutral atom. In general, ionization energy increases across a period and decreases down a group.So, for your question ⇻ IE decreases down the group.____________________
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
# ꧁❣ RainbowSalt2²2² ࿐