47.9 ml hrdrogen is collected at 26° Celsius and 718 torr. Find the volume occupied at STP
Answer:
The volume at STP is 41.3mL
Explanation:
To solve this question we must find the volume using the combined gas law. The equation is:
P1V1 / T1 = P2V2 / T2
Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state of the gas.
P1 = 718torr
V1 = 47.9mL
T1 = 26°C + 273.15 = 299.15K
P2 = 760torr at STP
V2 = ?
T2 = 273.15K at STP
Replacing:
718torr*47.9mL / 299.15K = 760torr*V2 / 273.15K
41.3mL = V2
The volume at STP is 41.3mL
The pen on seismograph swings freely.
Elements in Group I of the Periodic Table react with water.
Which row describes the products made in the reaction and the trend in reactivity of the elements?
Answer:
B
Explanation:
Which one of the samples contains the most molecules?
o
A. 1 mol of CO2(g)
B. 1 mol of UF6(g)
O C. 1 mol CH3COOH()
D. They all have the same number of molecules
Answer: D is right
Explanation: One mole contains 6.0225 ·10^23 molecules
Despite of the substance
What is the molarity of a solution which contains 0.80 mol of HCl in 250mL of
solution?
Answer:
3.2M HCl Solution
Explanation:
Molarity = moles of solute / volume of solution expressed in liters
moles of solute = 0.80 moles HCl
volume of solution = 250 ml = 0.250 Liter
Molarity (M) = 0.80 moles HCl / 0.250 Liters = 3.2M HCl Solution
how many liters would you need to make a 1 M solution if you have 6 mol of Sodium Hydroxide
a. 3
b. 4
c. 6
d. 2
One mole of NaOH = 40g NaOH
One mole of NaOH = 40g NaOHso to prepare 1M NaOH we need to dissolve 40g NaOH in water
One mole of NaOH = 40g NaOHso to prepare 1M NaOH we need to dissolve 40g NaOH in wateraccording to the given data,
One mole of NaOH = 40g NaOHso to prepare 1M NaOH we need to dissolve 40g NaOH in wateraccording to the given data,we have 6 moles of NaOH so we need 6 litres of Water olto prepare 1M Solution
What is the oxidation number of each nitrogen atom (N) in calcium nitrate (Ca(NO3)2)? (3
points)
+2
+3
+5
+6
Predict the reactivity of beryllium compared with magnesium give a reason for your answer use the periodic table
Answer:
Beryllium metal is relatively unreactive at room temperature, particularly in its massive form. Magnesium is more electropositive than the amphoteric beryllium and reacts more readily with most of the nonmetals.
Explanation:
When it comes to the ease with which a positive ion or cation of the metal can form, beryllium is less reactive than magnesium.
What is magnesium ?The chemical element magnesium has the atomic number 12 and the letter Mg as its symbol. It is a glossy, gray metal with a low melting point, high chemical reactivity, and a low density. It only naturally occurs in mixtures with other elements, just like the other alkaline earth metals, and it almost always has an oxidation state of +2.
At room temperature, beryllium metal is largely non-reactive, especially in its massive form. Magnesium interacts more quickly with the majority of nonmetals because it is more electropositive than amphoteric beryllium.
Due to the electron being removed being in the 3-level rather than the 2-level and being further away from the nucleus's attraction, the first ionization energy of magnesium is lower than that of beryllium.
Thus, When it comes to the ease with which a positive ion or cation of the metal can form, beryllium is less reactive than magnesium.
To learn more about magnesium, follow the link;
https://brainly.com/question/1533548
#SPJ2
An atom has 25 protons, 30 neutrons, and 25 electrons. What is the charge of the atom's nucleus?
A single proton has the charge of +1.
A neutron is neutral and has a charge of 0
A single electron has the charge of -1
Since the nucleus contains both protons and neutrons, with neutrons have charge of 0 and protons with +1, the total charge of the nucleus would be 25 * 1 which is +25.
Answer:
25+
Explanation:
25+ = the number of protons in the nucleus
At 390 K, the pressure of a sample of nitrogen is 2.07 atm. What will the
pressure be at 480 K
Answer:
190k 100 on the test
Explanation:
What element is 1s^2 2s^2 2p^6 3s2 3p^3
Answer:
Phosphorus
Explanation:
If you add up all the electrons (the exponents) it equals 15 which is the atomic number of phosphorus. And since stable atoms have the same number of protons and electrons it'll be phosphorus
Convert 230 centimeters into yards
It would be 2.515 yards. This is because to convert cm into yards, you would need to divide the length value by 91.44 so in your case, it would be 230÷ 91.44 which equals 2.51531.
Hope that helps!
Carbon dioxide reacts with lithium hydroxide to produce lithium carbonate and water.
What mass of lithium hydroxide would be required to react with 1.00 x 103 grams of carbon dioxide?
Answer:
1.08827 x 10^3 g.
Explanation:
The equation for the reaction is:
2LiOH + CO2 ----> Li2CO3 + H2O
Using the molar masses:
CO2 = 12.011 + 2* 16 = 44.011.
LiOH = 6.94 + 1.008 + 16 = 23.948
S0 44.011 of CO2 reacts with 2*23.948 g of LiOH
1.00 *10^3 g CO2 reacts with 2*23.948 * 1.00 *10^3 / 44.011
= 1088.27 g LiOH.
An unknown gas has pressure, volume and temperature of 0.9 atm 8L and 120°C respectively. How many moles of gas are present?
Answer:
n = 0.223 mol.
Explanation:
Hello there!
In this case, according to the given information, it is possible for us to approach this problem via the ideal gas law, which involves the pressure, moles, temperature and volume of the gas:
[tex]PV=nRT\\\\[/tex]
Thus, by solving for moles we obtain:
[tex]n=\frac{PV}{RT}[/tex]
Therefore, we plug in the given volume, temperature (in Kelvins) and pressure to obtain:
[tex]n=\frac{0.9atm*8L}{0.08206\frac{atm*L}{mol*K}*(120+273)K} \\\\n=0.223mol[/tex]
Best regards!
How do you make crack and what are its effects?
Determine the concentration of strontium ions in saturated solution of strontium sulfate, SrSO4, if the Ksp for SrSO4 is 3.2x10-7.
Answer:
[tex][Sr^{2+}]=5.66x10^{-4}M[/tex]
Explanation:
Hello there!
In this case, given the solubility equilibrium of strontium sulfate:
[tex]SrSO_4(s)\rightleftharpoons Sr^{2+}(aq)+SO_4^{2-}(aq)[/tex]
Whose equilibrium expression is:
[tex]Ksp=[Sr^{2+}][SO_4^{2-}][/tex]
In such a way, we can introduce the molar solubility, s, in the equation to obtain:
[tex]Ksp=s*s=s^2\\\\3.2x10^{-7}=s^2[/tex]
Then, we apply the square root to obtain:
[tex]s=\sqrt{3.2x10^{-7}}\\\\s=5.66x10^{-4}M[/tex]
Which is also the concentration of strontium ions:
[tex][Sr^{2+}]=5.66x10^{-4}M[/tex]
Best regards!
(b) Why is nitrogen used for storage of semen
in artificial insemination?
Question #1: Identify the type of Mutation below
Original
TTCGATA
TTGATA
Copy
Insertion
Substitution
Deletion
Answer:
Deletion
Explanation:
A mutation refers to a change in the DNA sequence. This means that the original sequence of bases in the DNA has been altered permanently.
There are three types of DNA mutations; base substitutions, deletions and insertions.
In the particular case of this question, the original is TTCGATA while the copy is TTGATA. If you look closely at the two, you will notice that the C has been omitted. This is an example of deletion.
Consider the reaction below.
HI + H2O → H30++
Which is an acid-conjugate base pair?
O HI and H20
O H2O and Hž0+
OH30+ and I
O HI and
Answer:
HI and I-
Explanation:
Hello there!
In this case, according to the acid ionization of hydroiodic acid:
[tex]HI+H_2O\rightarrow I^-+H_3O^+[/tex]
Now, since the acid, HI, results in the conjugate base, I- and the base, H2O in the conjugate acid, H3O+, it is correct to assert that the acid-conjugate base pair is HI and I-
Best regards!
The acid-conjugate base pair in the reaction above is HI and I-. Details about conjugate base can be found below.
What is a conjugate base?A conjugate base is the substance formed when an acid loses or donates its proton or hydrogen ion.
According to this question, the following reaction is given:
HI + H2O → H30+ + I-
The acid in this reaction is HI while the conjugate base is I-.
Learn more about conjugate base at: https://brainly.com/question/12883745
#SPJ5
.In a _____ relationship one variable increases and a second variable increases proportionally,
A. inverse relationship/inversely proportional
B. direct relationship/directly proportional
C. converse relationship/conversely proportional
Answer:
Explanation: b
A toy car rolls 8 meters in 2 seconds. What is the average speed of the toy car?
16 m/s
10 m/s
4 m/s
6 m/s
4. How many moles of Ca(HCO3)2 are present in 4.6 liters of a 3.5 molarity
solution?
Identify each of the following as a single bond, double bond, or triple bond.
_______ have cells that are all dried out.
Explanation: the answer plant seeds
not skin
What is the relationship between density and speed of light?
Answer:
The more optically dense that a material is, the slower that a wave will move through the material. ... So as the index of refraction value increases, the optical density increases, and the speed of light in that material decreases.
When are atoms considered stable?
when they have satisfied the law of conservation of mass naturally or through bonding to obtain
full valence shells
when they have satisfied the octet rule naturally or through bonding to obtain full valence shells
when their valence electrons have "fallen" back to ground state through bonding
Answer:
when they have satisfied the octet rule naturally or through bonding to obtain full valence shells
Explanation:
Generally, most atoms of an element are unstable because they have a void in their electron shell to fill, hence, they need to react with other elements to fulfil this task of octet.
Octet rule states that atoms of elements engage in reactions to form compounds so they can have eight (8) valence electrons in their shell. Noble gases e.g argon, neon etc. are elements that have naturally satisfied this octet rule by possession of 8 valence electrons in their shell. Other elements that do not have this naturally becomes reactive and enter bonding with other atoms to obtain full valence shells.
What term is used by chemists to quantitatively describe a solution in which a relatively small amount of solute is dissolved?
For the reaction 2Na + 2H20 - 2NaOH + H2, what type of reaction is taking place?
O synthesis
O decomposition
O single replacement
O double replacement
An empty beaker weighs 20g and when filled with
Kensene weighs 60g. If the Volume of the kerosene is 15cm2 calculate
the density of the kerosene
Answer: The density of kerosene is [tex]2.7g/cm^3[/tex]
Explanation:
Density is defined as the mass contained per unit volume.
[tex]Density=\frac{mass}{Volume}[/tex]
Given : Mass of kerosene = mass of beaker with kerosene - mass of empty beaker = 60 g - 20 g = 40 g
Volume of kersone = [tex]15cm^3[/tex]
Putting in the values we get:
[tex]Density=\frac{40g}{15cm^3}[/tex]
[tex]Density=2.7g/cm^3[/tex]
Thus the density of kerosene is [tex]2.7g/cm^3[/tex]
A certain automobile contains 4 tires, 2 headlights, 1 steering wheel,
and 6 spark plugs. How many of each part will be required to build 17 of
these cars?
Answer:
143 parts I think probably not