Answer:
Percentage yield = 61.7%
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated:
2AgNO₃ + Cu —> Cu(NO₃)₂ + 2Ag
Next, we shall determine the mass of AgNO₃ that reacted and the mass of Ag produced from the balanced equation. This is illustrated below:
Molar mass of AgNO₃ = 108 + 14 + (16×3)
= 108 + 14 + 48
= 170 g/mol
Mass of AgNO₃ from the balanced equation = 2 × 170 = 340 g
Molar mass of Ag = 108 g/mol
Mass of Ag from the balanced equation = 2 × 108 = 216 g
SUMMARY:
From the balanced equation above,
340 g of AgNO₃ reacted to produce 216 g of Ag.
Next, we shall determine the theoretical yield of Ag. This can be obtained as follow:
From the balanced equation above,
340 g of AgNO₃ reacted to produce 216 g of Ag.
Therefore, 51 g of AgNO₃ will react to produce = (51 × 216)/340 = 32.4 g of Ag.
Thus, the theoretical yield of Ag is 32.4 g.
Finally, we shall determine the percentage yield of Ag. This can be obtained as follow:
Actual yield = 20 g
Theoretical yield = 32.4 g
Percentage yield =?
Percentage yield = Actual yield /Theoretical yield × 100
Percentage yield = 20 / 32.4 × 100
Percentage yield = 61.7%
Combustion, or __________, is an example of one of the most familiar chemical changes. Melting of ice, likewise, is one of the most common examples of physical changes. When a piece of coal burns, combines with the carbon in the coal. The products are carbon dioxide gas, water vapor, and a lot of ash. After careful measurements are taken, the of the reactants (coal and oxygen) is to the mass of the products (carbon dioxide, water vapor, and ash). During the_________ reaction, the quantity of matter is unchanged. Similarly, when 10 grams of ice__________ , grams of water is obtained. Mass is_________ in this change as well.
Answer:
a) Burning
b) physical
c) 10
d) constant
Explanation:
Mass remains same in a physical reaction. It changes only in chemical reactions where some of the mass is lost as energy /heat.
Thus, during combustion mass changes while during melting mass of water do not changes.
Muriatic acid is often used to remove rust. A solution of muriatic acid, HCl, reacts with Fe203 deposits on
industrial equipment. How many liters of 5.00 M HCl would be needed to react completely with 339 g
Fe203?
Answer:
2.54 L
Explanation:
Step 1: Write the balanced neutralization equation
6 HCl + Fe₂O₃ → 3 H₂O + 2 FeCl₃
Step 2: Calculate the moles corresponding to 339 g of Fe₂O₃
The molar mass of Fe₂O₃ is 159.69 g/mol.
339 g × 1 mol/159.69 g = 2.12 mol
Step 3: Calculate the moles of HCl that react with 2.12 moles of Fe₂O₃
The molar ratio of HCl to Fe₂O₃ is 6:1. The reacting moles of HCl are 6/1 × 2.12 mol = 12.7 mol
Step 4: Calculate the volume of HCl
12.7 moles are in 5.00 M (5.00 mol/L) HCl. The required volume is:
12.7 mol × 1 L/5.00 mol = 2.54 L
Explain the difference between a mixture of two substances and a chemical compound formed by them
Answer:
mixtures are physically combined structures that are separated into their original components. A chemical substance is composed of one type of atom or molecule. A mixture is composed of different types of atoms or molecules that are not chemically bonded.
Explain:
yw
ask your mom and your family
Draw the atomic structure with electronic configuration of Potassium
Answer:
Explanation:
i try to help you
✧Kindly see the attached picture! ☄
♪ Hope I helped! ♡
[tex] \star[/tex] Best regards! ツ
☞ [tex] \underbrace{ \overbrace{ \mathfrak{Carry \: On \: Learning}}}[/tex] ✎
A gas has a volume of 10 L at 200 K and a pressure of 1.5 atm . What would the volume of the gas be at 300 K and 2atm of pressure ?
Answer:
hi
Explanation:
I'm just figuring this out what am I doing
4. The table shows the thermal conductivity of some common materials. Which would be the best insulator A. diamond B. gold C. lead D. concrete
please help me
The answer should be diamond.
Explanation:
Ionisation enthalpy across the group (increase or decrease)
Give reasons??
Answer:
As we move from left to right across a period, the ionization energy of elements increases. This is due to the decrease in the size of atoms across a period.
Answer:
[tex]\huge\boxed{Answer\hookleftarrow}[/tex]
Ionization enthalpy (IE) is the energy required to remove the highest-energy electron from a neutral atom. In general, ionization energy increases across a period and decreases down a group.So, for your question ⇻ IE decreases down the group.____________________
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
# ꧁❣ RainbowSalt2²2² ࿐
Engineers find a new metal that is stronger than steel.. (so on)
Answer is : D "Collaborate with other engineers in the design of a plane made from this metal".
Answer:
Explanation:
same thing as normal plane. just replace normal metal with this new sick metal :cool:
also make sure it weighs a good amount and won't fall from weight... im confused was this already answered???
Answer:
Collaborate with other engineers in the design of a plane made from this metal
Explanation:
<3
In order to determine the magnetic properties of phosphorus atom we need to find out the number of unpaired electrons present in the ground state of phosphorus atom! Select one of the answers below that represents this number.
Group of answer choices
1
4
3
0
2
Answer:
Think of it this way If you have a phosphorus atom whats its oposites once you found that out you may be able to find the answer
Explanation:
Hope this helps :)
As a rollercoaster travels upward what type of energy transfer is taking place?A.electrical to thermal energy B.kinetic to potential energy C.mechanical to chemical energy D.potential to kinetic energy
Answer:
B.
Explanation:
if u mix 10ml of 70%ethanol with 20ml of 80% ethanol with 50ml water what is the concentration of the resulted solution
Answer:
29% is the final concentration
Explanation:
To solve this question we must find the volume of ethanol added and the volume of the whole solution. The concentration will be:
Volume ethanol / Total volume * 100
Volume ethanol:
10mL * 70% = 7mL ethanol
+
20mL * 80% = 16mL ethanol
= 23mL ethanol
Total volume:
10mL + 20mL + 50mL = 80mL
Concentration:
23mL / 80mL * 100
= 29% is the final concentration
1. Write formulas for the binary ionic compounds formed between
the following elements:
a. potassium and iodine d. aluminum and sulfur
b. magnesium and chlorine e. aluminum and nitrogen
C. sodium and sulfur
The formulas for the binary ionic compounds are:
a. potassium and iodine: KI.b. magnesium and chlorine: MgCl₂.c. sodium and sulfur: Na₂S.d. aluminum and sulfur: Al₂S₃.e. aluminum and nitrogen: AlN.We want to write the formulas of different binary ionic compounds. to do so, we need to consider the octet's rule.
What is the octet's rule?The octet's rule establishes that atoms will lose, gain or share electrons to achieve the electron configuration of the nearest noble gas (8 valence electrons except for He with 2).
a. potassium and iodineK has 1 valence electron so it will lose 1 electron to form K⁺. I has 7 valence electrons so it will gain 1 electron to form I⁻. The neutral compound between K⁺ and I⁻ is KI.
b. magnesium and chlorine
Mg has 2 valence electrons so it will lose 2 electrons to form Mg⁺². Cl has 7 valence electrons so it will gain 1 electron to form Cl⁻. The neutral compound between Mg⁺²⁺ and Cl⁻ is MgCl₂.
c. sodium and sulfur
Na has 1 valence electron so it will lose 1 electron to form Na⁺. S has 6 valence electrons so it will gain 2 electrons to form S⁻². The neutral compound between Na⁺ and S⁻² is Na₂S.
d. aluminum and sulfurAl has 3 valence electrons so it will lose 3 electrons to form Al³⁺. S has 6 valence electrons so it will gain 2 electrons to form S⁻². The neutral compound between Al³⁺ and S⁻² is Al₂S₃.
e. aluminum and nitrogenAl has 3 valence electrons so it will lose 3 electrons to form Al³⁺. N has 5 valence electrons so it will gain 3 electrons to form N³⁻. The neutral compound between Al³⁺ and N³⁻ is AlN.
The formulas for the binary ionic compounds are:
a. potassium and iodine: KI.b. magnesium and chlorine: MgCl₂.c. sodium and sulfur: Na₂S.d. aluminum and sulfur: Al₂S₃.e. aluminum and nitrogen: AlN.Learn more about binary compounds here: https://brainly.com/question/7960132
What is the difference between 13.254 m/s and 7.7 m/s? Round your answer to the correct number of significant digits.
Answer:
5.6 m/s
Explanation:
Given,
First number = 13.254 m/s
Second number = 7.7 m/s
We need to find the difference between these two numbers. First we round off 13.254 to one decimal place i.e. 13.254 = 13.3 m/s
The difference between them is given by :
D = 13.3 - 7.7
= 5.6 m/s
Hence, the difference of the two numbers is 5.6 m/s.
True or false when matter changes it’s state it is a physical change because it is the same substance the whole time.
Answer:
true
Explanation:
1) ____C3H8 + ____O2 → ____CO2 + ____H2O
The chemical formula for sodium citrate is Na3C6H5O7. Which statement is true? Sodium citrate is a compound with a total of 21 atoms. Sodium citrate is an element with a total of 21 atoms. Sodium citrate is a compound with a total of 4 atoms. Sodium citrate is a compound with a total of 21 atoms, each of a different element.
Answer:
Sodium citrate is a compound with a total of 21 atoms
What is the value of for this aqueous reaction at 298 K?
A+B↽⇀C+D ΔG°=12.86 kJ/mol
K=
Answer:
The equilbrium constant is 179.6
Explanation:
To solve this question we can use the equation:
ΔG = -RTlnK
Where ΔG is Gibbs free energy = 12.86kJ/mol
R is gas constant = 8.314x10⁻³kJ/molK
T is absolute temperature = 298K
And K is equilibrium constant.
Replacing:
12.86kJ/mol = -8.314x10⁻³kJ/molK*298K lnK
5.19 = lnK
e^5.19 = K
179.6 = K
The equilbrium constant is 179.6If 18.0 g of CO2 is produced in the reaction of C2H2 with O2 to form CO2 and
H2O, how many grams of H20 are produced in this reaction?
O 3.68 g
9.0 g
14.7 g
None of the above
7.37 g
Answer:
3.68 g
Explanation:
[tex]n_{CO2}[/tex] = 18 ÷ 44 = 0.4
2C2H2 + 5O2 → 4CO2 + 2H2O
2 : 5 : 4 : 2
0.409 (moles)
⇒ [tex]n_{H2O}[/tex] = 0.409 × 2 ÷ 4 = 0.2045 moles
⇒ [tex]m_{H2O}[/tex] = 0.2045 × 18 = 3.68 grams
Thermosetting polymers are less likely to be recycled than thermoplastic polymers because: Thermosetting polymers are less likely to be recycled than thermoplastic polymers because: Some other reason. They are so cheap that it is not worthwhile to recycle them. They cannot be re-melted by heating to form into new shapes. They are so durable that there are not enough thermosetting polymers in the waste stream to set up a recycling program.
Answer:
They cannot be re-melted by heating to form into new shapes.
Explanation:
Recycling refers to the process of melting a plastic and making it into another shape or size.
Thermoplastics can be softened repeatedly, melted and remoulded. Thermosetting polymers can not be softened, melted and remoulded once they are formed.
Hence, thermosetting polymers cannot be re-melted by heating to form into new shapes therefore they can't be recycled.
Individual Laboratory Follow-up Questions a. Explain the purpose of the experiment. b. What are reasonable sources of error for determining calcium ion concentration by the titration process? c. Summarize the conclusions for your experiment in two to three complete sentences. Include the amount of calcium in your soil.
Solution :
a). In this experiments, we can determine the hardness of the water or [tex]$Ca^{2+}$[/tex] ion concentration in the sample.
b). The Possible errors are :
- During the weighing of calcium standard preparation, if the balance is not traced properly, it will cause an error.
- By dilution of standard from the stock will lead a dilution error of 0.1 mL for 100 mL.
- Misreading the liter values will give an error.
c). Depending upon the calcium content present in the soil, we conclude that the fertile percent of the soil as well as the mineral capacity of the soil.
4 methyl 2 pentanone structural formula
Answer:
(CH3)2CHCH2COCH3
Explanation:
Even when the temperature of a pan of water is less than the boiling point, water still evaporates. This is because
a. the speeds of individual molecules varies
b. conservation of energy
c. of convection
d. radiation
Dry air is 78.09% nitrogen, 20.95% oxygen, 0.93% argon, 0.039% carbon dioxide so varying amounts of water vapor- depending on humidity. Some gases however strongly absorb infrared radiation and trap it in the atmosphere and can therefore result in elevated global temperatures. Therefore they are termed greenhouse gases. Which greenhouse gas have we observed a marked increase in atmospheric concentrations in the last 100 years?
A. methane (CH4)
B. carbon monoxide
C. carbon dioxide
D.ozone (03)
E. oxygen
F. nitrogen
G.water vapor (H20)
Answer:
C. Carbon dioxide
Explanation:
Carbon dioxide is one of the end-product of combustion reactions involving many fuels today.
With the rapid increase in urbanization and technological development, man demand for energy increased tremendously. The discovery of fossil fuels paved the way for the astronomical increase in the concentration of carbon dioxide in the atmosphere. The burning of fossil fuels like coal and oil invovles the process where the carbon atoms present in these fuels combine with oxygen in the air to make CO2. This has resulted in an increase in the concentration of atmospheric carbon dioxide (CO2).
The burning fossil fuels for electricity, industry, heat, and transportation are the major sources of the emossion of carbon dioxide.
Also, the cutting down of trees for paper production, building construction and for the establishment of settlements also increase the concentration of carbon dioxide in the atmosphere. Trees are help remove carbon dioxide from the atmosphere through the process of photosynthesis. However, when these trees are cut down, carbon dioxide accumulates in the atmosphere.
Which of the following chemical substances has diatomic molecules? a) carbon dioxide b) nitrogen c) ozone d) nitrogen dioxide
Answer:
C I think
Explanation:
What's the partial pressure of hydrogen in a gas mixture if its mole fraction is 0.1 and the total pressure is 325 torr?
Question 15 options:
325 torr
32.5 torr
100 torr
65 torr
2. Why is it difficult for us to go up in a mountain than go down?
A We are moving against gravity
B. We are pulled by the wind
C. We are moving towards gravity.
D. None of the above
Farth
help
Answer:
We are moving against gravity
Most physical and chemical changes in matter include a change of energy true or false
Answer: true
Explanation:
Energy changes are a common component of physical and chemical changes in matter. Hence the statement is True.
Briefing:Physical changes and chemical changes are the two different types of changes that chemists examine. A substance can undergo physical changes without having its identity altered. Chemical transformations take place when one substance transforms into another.
Which is a chemical change?When one chemical material changes into one or more others, as when iron rusts, this is referred to as a chemical transformation. Chemical reactions produce changes in the way that atoms and molecules are ordered, which leads to the formation of new substances with new properties.
To know more about Chemical change visit:
https://brainly.com/question/23693316
#SPJ2
Si-4) AN= 14 AM= 28
e= n=
Answer:
have a good day
Explanation:
What is the value of for this aqueous reaction at 298 K?
A+B↽⇀C+D
ΔG°=12.86 kJ/mol
K=
Answer:
Kc = 0.5951 (4 sig. figs.)
Explanation:
For A + B ⇄ C + D at standard thermodynamic conditions (298K, 1atm)
ΔG = ΔG° + R·T·lnQ => 0 = ΔG° + R·T·lnKc => ΔG° = - R·T·lnKc
=> lnKc = - ΔG°/R·T
ΔG° = +12.86 Kj/mol
R = 8.314 Kj/mol·K
T = 298K
lnKc = - (+12.86Kj) / (8.314Kj/mol·K)(298K) = - 0.519 mol⁻¹
Kc = e⁻⁰°⁵¹⁹ mol⁻¹ = 0.5957 mol⁻¹ (4 sig. figs.)
How many molecules are in 3 moles of CO2?
O A. 5.418 x 1024
OB. 1.806 x 1024
O C. 6.02 x 1024
O D. 1.806 x 1023
Answer:
1.806 × 10²⁴Explanation:
The number of molecules can be found by using the formula
N = n × L
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 3 × 6.02 × 10²³
We have the final answer as
1.806 × 10²⁴Hope this helps you
Answer: OB. 1.806 x 1024
Explanation: