Answer:
B
Explanation:
Gravity pulls so if it is greater, then earth will fallllllll
If the force of gravity between Earth and the sun were greater than Earth’s inertia then the Earth would fall into the sun. The correct option is B.
What is gravity?The force that keeps the gases in the sun together. The force that causes a ball thrown into the air to fall back down.
The force that causes a car to coast downhill even when no gas is applied. The force that results to a glass to fall to the floor when it is dropped.
The stronger the pull of the gravitational forces they exert on each other, the greater the mass of the two objects and the shorter the distance between them.
The Sun's gravity is approximately 27.9 times that of Earth, and it aids in the control of the tides on Earth.
The Earth would fall into the sun if the force of gravity between Earth and the sun was greater than the force of inertia.
For more details regarding gravity, visit:
#SPJ2
True or false: to get 8 valence electrons, oxygen can borrow or share some electrons
Answer:
True
Explanation:
In ionic compounds, oxygen borrows electrons. In covalent compounds, oxygen shares electrons.
what blood vessels and chambers of the heart does a red blood cell pass as it delivers oxygen from the lungs to the brain and return to be oxygenated again.
Answer:
capillaries
Explanation:
hope it helps if I'm not tell me right away.
Answer:
Carotid artery, Jugular veins
The chambers are explained below.
Explanation:
THE BLOOD VESSELS
The carotid artery carries red blood (oxygenated) to the head and the neck region and that obviously include the brain via the aorta. To be precise the internal carotid artery supplies oxygenated red blood cells to brain. The jugular veins carry deoxygenated red blood cells from the head back to the heart via the superior vena cava. The most important function of the jugular vein is to drain deoxygenated blood from brain.
THE CHAMBERS
The left atrium receives oxygenated blood from the lungs and pumps it to the left ventricle which also pumps the same oxygenated blood to the rest of the body through the aortic valve (aorta).
The right atrium receives deoxygenated blood from the body via the vena cava and pumps the deoxygenated blood to the right ventricle which pumps the deoxygenated blood to be oxygenated by the lungs via the pulmonary valve (pulmonary artery).
CONCLUSION
The oxygenated red blood cells from the lung pass through the pulmonary vein through the left atrium to the left ventricle through the carotid artery (internal carotid artery) via the aorta to the brain and
The deoxygenated red blood cells in the brain are drained through the jugular vein via the superior vena cava to the right atrium, which pumps the deoxygenated blood to the right ventricle. From here the deoxygenated blood is pumped to the lungs via the pulmonary artery for oxygenation.
This is my answer, thus if I got your question right.
93 Points!!! Which of the following join together to form molecules?
Atoms
Organisms
Organs
Tissues
Answer:
Atoms
Explanation:
Atoms are the smallest thing meaning they form molecules which are made of atoms.
Also, your question is not 93 points but whatever lol.
Answer:
Atoms
Explanation:
I took the test
What combinations of up and down did quarks combine to make the proton?
A. Down + down + down
B. Up+Up+ down
C. Up+Up+Up
D. Up+down+down
E. Up+down
Answer:
it is b
Explanation:
b is the quarks for a proton
Answer:
B
Explanation:
Calculate the molar mass of ZnCr04
Answer:
181.403 g/mol is the answer as it is Zinc chromate
Explanation:
Answer:
181.403 g/mol
Explanation:
Molar mass of ZnCrO4 = 181.3737 g/mol. This compound is also known as Zinc Chromate. Convert grams ZnCrO4 to moles or moles ZnCrO4 to grams. 65.38 + 51.9961 + 15.9994*4
Which best explains why ionization energy tends to decrease from the top to the bottom of a group? The number of orbitals decreases. The number of neutrons decreases. Electrons get closer to the nucleus. Electrons get farther from the nucleus.
Answer:
Electrons get farther from the nucleus.
Explanation:
By going from the top to the bottom of a group, the atomic number increases. That would mean that:
The number of orbitals increases, as there are more electrons.A higher atomic number implies an increasing number of neutrons.As there are more electrons, they get farther from the nucleus. The farther an electron is from the nucleus, the easier it is for the electron to be removed from the atom.Ionization energy decreases down the group because electrons get farther from the nucleus hence they are easier to remove.
Ionization energy refers to the energy required to remove an electron from an atom. The ionization energy is a periodic trend that decreases down the group but increases across the period.
The ionization energy decreases down the group because electrons get farther from the nucleus hence they are easier to remove.
Learn more: https://brainly.com/question/16243729
Which of the following polyatomic ions will form an ionic compound with a single sodium ion?
CO3 2-
HCO3 1-
SO4 2-
SO3 2-
Answer:
Option B, HCO3 1-
Explanation:
The valence of Sodium ion is +1 and the valence of HCO3 is -1. Thus, sodium ion has an extra electron to be donated to complete its outer shell while HCO3 needs an electron to complete its outer shell
Hence Na will combine with HCO3 to form NaHCO3
Option B is correct
The polyatomic ion which will form an ionic compound with a single sodium ion is; HCO3 ¹-
In chemical bonding between ions;
The major criteria is a balance of charges within the compound formed.
As such, all polyatomic ions in the option are di-ionic except for HCO3 1- which can perfectly form an ionic compound with 1 single sodium ion.
Read more on ionic compounds:
https://brainly.com/question/13539062
What is 1 x 102 divided by 1 x 10-3?
O 1x 10-6
O 1x 10-1
0 1x 103
O 1 x 105
Answer:
Option (d) is correct.
Explanation:
Let [tex]x=10^2[/tex] and [tex]y=10^{-3}[/tex].
We need to find the value of [tex]\dfrac{x}{y}[/tex].
Put the values of x and y such that,
[tex]\dfrac{x}{y}=\dfrac{10^2}{10^{-3}}\\\\=10^2\times 10^3\ (As\ \dfrac{1}{x^{-a}}=x^a)\\\\=10^5\ (As\ x^a\times x^b=x^{ab})\\\\=1\times 10^5[/tex]
So, the required answer is equal to [tex]1\times 10^5[/tex]. Hence, the correct option is (d).
What is the molarity of a solution in which 0.257 moles of HNO2 is dissolved in 490ml of water?
0.52 molar is the molarity of a solution in which 0.257 moles of HNO2 is dissolved in 490ml of water.
What do you mean by the term molarity ?The term molarity is defined as the number of moles of solutes are dissolved in per litre of solution. It is represented by the symbol "M". The unit of molarity is molar(M).
To calculate the molarity of a solution, divide the moles of solute by the volume of the solution expressed in liters.
The formula of molarity = a number of moles of solutes / litre of solution
Given:
Number of moles = 0.257 moles
Volume = 490ml = 0.49 litre
Molarity = ?
According to the definition of molarity,
Molarity = Number of moles of solute / litre of solution
Molarity = 0.257 moles / 0.49 litre
Molarity = 0.52 molar
Thus, the molarity of a solution in which 0.257 moles of HNO2 is dissolved in 490ml of water is 0.52 molar.
To learn more about the molarity, follow the link;
https://brainly.com/question/8732513
#SPJ6
what is the acceleration of a 100kg object being pushed with a force of 1000 newton's
Answer:
the person that answered it with the link, dont click it's a virus
Explanation:
In this reaction diagram, which part represents the difference in energy
between the reactants and the products?
Potential energy
HA
Reaction progress
Answer:
Option D. G
Explanation:
In the energy profile diagram, the difference in the energy between reactant and product is called enthalphy Change (ΔH).
Mathematically, the enthalpy change (ΔH) is represented as:
Enthalpy change (ΔH) = Heat of product (Hₚ) – Heat of reactant (Hᵣ)
ΔH = Hₚ – Hᵣ
Considering the diagram given in question above, the difference in the energy of product and reactant is indicated by the letter G
Thus, option D gives the correct answer to the question.
#1 pls help me complete
Answer:
n = 0.045 mol.
Explanation:
Hello there!
In this case, according to the given problem, we can firstly set up the ideal gas equation as shown below:
[tex]PV=nRT[/tex]
Thus, as we are asked to calculate the moles, we proceed as follows:
[tex]n=\frac{PV}{RT}[/tex]
Therefore, we plug in the given data to obtain:
[tex]n=\frac{760mmHg*\frac{1atm}{760mmHg}*1.0L}{0.08206\frac{atm*L}{mol*K}*273K} \\\\n=0.045mol[/tex]
Best regards!
How much heat will be absorbed when 38.2 g of bromine reacts with 12.4g of hydrogen according to the following equation?
H2 + Br2 + 72.80 = 2HBr
Answer:
17.4 kJ
Explanation:
2NH3(g)+3CuO(s)= + 3H2O(I)+N2(g)
If a sample of 51.0g of ammonia's reacted with excess copper oxide, how many moles of nitrogen would be produced?
Answer:
1.50 mol N₂
Explanation:
Step 1: Write the balanced equation
2 NH₃(g) + 3 CuO(s) ⇒ 3 Cu + 3 H₂O(I) + N₂(g)
Step 2: Calculate the moles corresponding to 51.0 g of NH₃
The molar mass of NH₃ is 17.03 g/mol.
51.0 g × 1 mol/17.03 g = 2.99 mol
Step 3: Calculate the moles of N₂ produced from 2.99 moles of NH₃
The molar ratio of NH₃ to N₂is 2:1. The moles of N₂ produced are:
2.99 mol NH₃ × 1 mol N₂/2 mol NH₃ = 1.50 mol N₂
When you draw a bow'across a violin string, which kind of wave is created in
the air surrounding the string?
A. surface
B. electromagnetic
C. longitudinal
D. Transverse
Answer:
C
Explanation:
Answer: C. Longitudinal
Explanation: A P 3 X
Consider the following reaction
X + Al(NO3)3 (aq) → X(NO3)y (aq) + Al(s)
Using the provided Activity Series of Elements, determine which of the following elements could be X.
a. Copper b. Lead c. Iron d. Calcium
Answer: Calcium
Explanation: an element need to reduce Iron in reaction.
Calcium is only metal in list which can reduce Iron
i If a chemical system is at equilibrium, any change in the system will always result in an increase of which of the following?
1.The reaction that opposes the change
2. The concentration of the product
3. The concentration of the reactants
4. The temperature of the system
Answer:
1.The reaction that opposes the change
Explanation:
Consider the reaction;
A + B ⇄ C + D
If a constraint such as a change in temperature, pressure or volume is imposed on this chemical system in dynamic equilibrium, the equilibrium position will shift so as to annul the constraint.
This shift in the equilibrium position will favour either the forward or reverse reaction depending on the type of constraint imposed on the system.
Hence, If a chemical system is at equilibrium, any change in the system will always result in an increase of the reaction that opposes the change.
Please help me! It’s past due but he giving me 15 mins!
1)
Steel Wool Experiment
Before
Observations
After
Observations
Appearance
Steel wool dark gray,
Balloon deflated
Appearance
Steel wool dark
brown; Balloon
inflated
Mass (9)
485.68
Mass (9)
The students data can be seen here. A chemical reaction clearly took
place in the flask. One entry is missing: the mass of the system at the
end of the experiment. What amount should be added to the data
table?
Answer:
Chemical reactions, chemistry, science as inquiry and data analysis. ... Students burn steel wool in both an open and closed environment to understand ... The difference in mass for this small sample of steel wool will be very small. ... careful attention to the balloon! 9. When rusting occurs the properties of the metal changes.
Explanation:
help help help help
Answer:
2,4,6–trimethylheptanal
Explanation:
To name the compound given, we must first obtain the following:
1. Determine the functional group of the compound.
2. Determine the longest continuous carbon chain. This gives the parent name of the compound.
3. Identify the substituent group attached to the compound.
4. Locate the position of the substituent group.
5. Combine the above to obtain the name of the compound.
Now, we shall name the compound as follow:
1. The functional group of the compound is –CHO. Thus, the compound is an alkanal.
2. The longest continuous carbon chain is 7. Thus, the parent of the compound is heptanal.
3. The substituent group attached to the compound is methyl (–CH₃).
NOTE: There are 3 methyl groups attached to the compound.
4. The methyl groups attached to compound are located at carbon 2, 4 and 6.
5. Therefore, the name of the compound is:
2,4,6–trimethylheptanal
Mr. Ragusa asks Hassan to make silver crystals from the following reaction.
2AgNO3 + Cu --> Cu(NO3)2 + 2Ag
Mr. Ragusa gives Hassan 51 g of silver nitrate to conduct the experiment. Hassan gives Mr. Ragusa 20 g of
silver crystals. What was Hassan's percent yield for his experiment?
Please round your answer to 2 decimal places
Answer:
Percentage yield = 61.7%
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated:
2AgNO₃ + Cu —> Cu(NO₃)₂ + 2Ag
Next, we shall determine the mass of AgNO₃ that reacted and the mass of Ag produced from the balanced equation. This is illustrated below:
Molar mass of AgNO₃ = 108 + 14 + (16×3)
= 108 + 14 + 48
= 170 g/mol
Mass of AgNO₃ from the balanced equation = 2 × 170 = 340 g
Molar mass of Ag = 108 g/mol
Mass of Ag from the balanced equation = 2 × 108 = 216 g
SUMMARY:
From the balanced equation above,
340 g of AgNO₃ reacted to produce 216 g of Ag.
Next, we shall determine the theoretical yield of Ag. This can be obtained as follow:
From the balanced equation above,
340 g of AgNO₃ reacted to produce 216 g of Ag.
Therefore, 51 g of AgNO₃ will react to produce = (51 × 216)/340 = 32.4 g of Ag.
Thus, the theoretical yield of Ag is 32.4 g.
Finally, we shall determine the percentage yield of Ag. This can be obtained as follow:
Actual yield = 20 g
Theoretical yield = 32.4 g
Percentage yield =?
Percentage yield = Actual yield /Theoretical yield × 100
Percentage yield = 20 / 32.4 × 100
Percentage yield = 61.7%
Ammonia is produced by the Haber process. The equation is shown.
N2 (g) + 3H2 (g) ⇔ 2NH3 (g)
The forward reaction is exothermic.
Which statement is correct?
Increasing pressure decreases the yield of ammonia, but speeds up the reaction.
Increasing temperature decreases the yield of ammonia, but speeds up the reaction.
Increasing the concentration of hydrogen and nitrogen results in a lower yield of ammonia.
Increasing the temperature increases the yield of ammonia and speeds up the reaction.
Answer:
option D
Explanation:
Increasing the temperature increases the yield of ammonia and speeds up the reaction as chemical reaction is affected by temperature.
Answer:
increasing the temperature decreases the yield of ammonia but speeds up the reaction
Explanation:
first pressure have no effect in chemical reaction
Enter an equation showing how this buffer neutralizes added aqueous acid (HI). Express your answer as a chemical equation. Identify all of the phases in your answer.
Answer:
[tex]H^++NH_3\rightleftharpoons NH_4^+[/tex]
Explanation:
Hello there!
In this case, since the buffer is not given, we assume it is based off ammonia, it means the ammonia-ammonium buffer, whereas the ammonia is the weak base and the ammonium ion stands for the conjugate acid. In such a way, when adding HI to the solution, the base of the buffer, NH3, reacts with the former to promote the following chemical reaction:
[tex]H^++NH_3\rightleftharpoons NH_4^+[/tex]
Because the HI is totally ionized in solution so the iodide ion becomes an spectator one.
Best regards!
Answer:
the above answer is wrong
Explanation:
its really not but the mastering chemistry says it is
Consider an atom that has an electron in an excited state. The electron falls to a lower energy level. What effect does that have on the electron?
Answer:
On returning to lowest energy state which is stable, it releases energy in the form of light. Hence, option A that is the electron releases energy in the form of light on falling to lower energy state from excite state.
What is biocapacity?
PLZZ HELP TY
Answer:
Explanation:
The biocapacity or biological capacity of an ecosystem is an estimate of its production of certain biological materials such as natural resources, and its absorption and filtering of other materials such as carbon dioxide from the atmosphere.
1.35 m solution NaOCl in water is prepared. What is the mole fraction of the NaOCl?
Answer:
NaOCl + H2O → HOCl + NaOH
so the mole fraction is = moles of NaOCl/(moles of NaOCl+moles of H2O)
so for 1.35 NaOCl it will require 1.35 moleof H2O
mole fraction = 1.35/(1.35+1.35)
mole fraction = 1/2 =0.5
is it correct i d ek but i tried :)
The mole fraction of the NaOCl is 0.0237
We'll begin by calculating the mole of solute (NaOCl) in the solution.
Molality = 1.35 mMass of water = 1 KgMole of NaOCl =?Mole = Molality x mass (Kg) of water
Mole of NaOCl = 1.35 × 1
Mole of NaOCl = 1.35 mole
Next, we shall determine the mole of water.
Mass of water = 1 Kg = 1000 gMolar mass of water = 18.01 g/mol Mole of water =?Mole = mass / molar mass
Mole of water = 1000 / 18.01
Mole of water = 55.52 moles
Finally, we shall determine the mole fraction of NaOCl.
Mole of NaOCl = 1.35 moleMole of water = 55.52 moles Total mole = 1.35 + 55.52 = 56.87 moles Mole fraction of NaOCl =?Mole fraction = mole / total mole
Mole fraction of NaOCl = 1.35 / 56.87
Mole fraction of NaOCl = 0.0237
Learn more about mole fraction:
https://brainly.com/question/26051051
What is the meaning of a null hypothesis being rejected?
The hypothesis is definitely correct.
The hypothesis might be correct.
The hypothesis is false.
The null hypothesis is correct.
Answer:
the hypothesis is false
Explanation:
it I rejected because the hypothesis has been tested severally and the answer still proves to be wrong
Answer:
probably the third option: The hypothesis is false
Explanation:
If I have 100 mL of oil in a container and 100 mL of water in another
conta in er Which container wouldhave more mass?
Answer:
The answer is 200mL each amount have the same mass
Explanation:
100mL +100ML= 200mL mass in each container
Answer:
200ml
Explanation:
Whose ideas were based on scientifically gathered evidence?
A. Aristotle and alchemists
B. Aristotle and John Dalton
C. John Dalton and Marie Curie
D. Marie Curie and alchemists
Answer:
Maybe c?
Explanation:
John Dalton was an English chemist, and Marie Curie was a physicist and chemist. The ideas of John Dalton and Marie Curie were based on scientifically gathered evidence. Thus, option C is correct.
Who are John Dalton and Marie Curie?John Dalton and Marie Curie are famous physicists and chemists. John Dalton is most known for introducing the theory of the atom and color blindness. He gave the theory of atomism based on the experimental setup.
Marie curie hugely contributed to the discovery of radioactivity and cancer research. She and her husband experimented and searched for the radioactive material.
Aristotle was a philosopher and established the relation between the various fields of sciences. He originated the idea of Alchemy by combining the four elements.
Therefore, John Dalton and Marie Curie proposed ideas based on research.
Learn more about Marie Curie here:
https://brainly.com/question/23920465
#SPJ2
When 565g of a metal with temperature of 90.00 C added to 200.0 g of water at 25.00 degrees. Assuming all the heat lost by the iron is transferred to the water ( specific heat capacity of water = 4/18 J/(g-C)), and the final temperature of the mixture is 34.40 degree Celsius what is the heat capacity of the metal?
Answer:
The specific heat is 0.25J/g°C
Explanation:
To solve this question we must know that the heat released for the metal is equal to the heat absorbed for the water. The equation is:
S(Metal)*m(Metal)*ΔT(metal) = S(water)*m(water)*ΔT(water)
Where S of metal is our incognite (Specific heat of metal)
m is the mass of the metal = 565g
ΔT is change in heat of the metal = 90.00°C - 34.40°C = 55.60°C
Specific heat of water = 4.18J/g°C
The mass of water = 200.0g
ΔT of water is 34.40°C - 25.00°C = 9.40°C
Replacing:
S(Metal)*565g*55.60°C = 4.18J/g°C*200.0g*9.40°C
S(metal) = 0.25J/g°C
The specific heat is 0.25J/g°C