The pH and pOH scales represent concentrations of [H3O+] and [OH−], respectively. What are the hydronium ion concentration and the hydroxide ion concentration of pure water at 25 °C?

Answer:

Q.1

Given-

Volume of solution-1 L

Molarity of solution -6M

to find gms of AgNO3-?

Molarity = number of moles of solute/volume of solution in litre

number of moles of solute = 6×1= 6moles

one moles of AgNO3 weighs 169.87 g

so mass of 6 moles of AgNO3 = 169.87×6=1019.22

so you need 1019.22 g of AgNO3 to make 1.0 L of a 6.0 M solution

1. the grams of [tex]\rm AgNO_3[/tex] is 1019.22.

2. 10,192.2

Molarity is the measure of the concentration of any solute in per unit volume of the solution.

1. Volume is 1.0 l.

Molarity of solution -6 m

To find the mass of [tex]\rm AgNO_3[/tex]

[tex]\rm Molarity = \dfrac{n}{V}\\\\rm 6 = \dfrac{n}{1}\\\\n = 6 \times 1 = 6[/tex]

Mass of One mole of [tex]\rm AgNO_3[/tex] is 169.87 g

Therefore, the mass of 6 moles will be

169.87 × 6 = 1019.22

2. Molarity of solution 6.0

Volume of solution is 0.1m

The mass of 6 moles will be

169.87 × 6 = 1019.22

[tex]\rm density = \dfrac{mass }{volume} \\\\\rm density = \dfrac{1019.22 }{0.1} = 10,192.2[/tex]

Thus, the options are 1. 1019.22    2. 10,192.2

Learn more about molarity, here

Answer:

laboratory preparation off Hydrogen: Hydrogen is prepared in the laboratory by the action of the dilute hydrochloric acid or dilute sulphuric acid on granulated zinc. Use of Granulated Zinc Granulated zinc contains an impurity like copper which acts as a positive catalyyst.

Explanation:

Hope this helps!

Answer:

Explanation:

crude oil takes thousands of years before forming.

it takes place when animals and plants die...later they decompose especially the ones in water ..the ones on land burn as fossil fuels and go back to the atmosphere through combustion..the decomposed materials turn into crude oil in the ocean where it's extracted and separated through fractional distillation into several oils such diesel, petroleum, coalter e.t.c

Answer:

Endothermic

Explanation:

An endothermic reaction is one in which energy is absorbed while an exothermic reaction is one in which energy is given out(evolved).

If we look at the reaction as written; 3C(graphite) + 3H2(g) + 88kcal -------> C3H8(g), we will notice that;

i) 88kcal of energy had to be absorbed for the reaction to occur

ii) The enthalpy change for the reaction is positive.

Since energy must be taken in to drive the forward reaction, then the reaction is endothermic as written.

Answer:

B. Carry oxygen, nutrients, waste, & to fight pathogens

Explanation:

The circulatory system refers to all organs and tissues involved in carrying blood and lymph around the body.

The circulatory system carries oxygenated blood from the heart to cells and  deoxygenated blood back to the heart.

Nutrients are carried in the blood to cells in different parts of the body and waste products are also carried from cells in the blood.

White blood cells is a component of blood in the circulatory system that fights off diseases.

Answer:

E) +355 kJ

Explanation:

Based on Hess's law, it is possible to obtain ΔH of a reaction from the sum of similar reactions:

(1) IF(g) + F2(g) → IF3(g) ΔH = -390kJ

(2) IF(g) + 2F2(g) → IF5(g) ΔH = -745kJ

The sum of (1) - (2) is:

IF(g) + F2(g) → IF3(g)

IF5(g) → IF(g) + 2F2(g)

_________________

IF5(g) → IF3(g) + F2(g)

ΔH = -390kJ - (-745kJ)

ΔH = +355kJ

Right answer is:

2.85 grams

4.28x10^2 atoms (40.08 grams of Ca/ 6.02x10^23)

Answer:

The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Lithium, or 6.941 grams.

Thus, the answer would be 16.24194.

Explanation:

Answer:

5.83 M

Explanation:

3.5 M * 125.0 ml  =  M₂ * 75.0ml

437.5 M.ml = M₂ * 75.0 ml

M₂ = 437.5 M.ml / 75.0 ml

M₂ = 5.83 M

Answer:

the heat wants to travel up. Heat rises

Explanation:

Answer:

"Electron binding energy, more commonly known as ionization energy, is a measure of the energy required to free an electron from its atomic orbital or from a solid. ... The atomic binding energy of the atom is the energy required to disassemble an atom into free electrons and a nucleus."

Explanation:

Hope this helps! <33

God bless your heart <3333

have a wonderful day!

Binding energy is a required amount of energy that disperses the other particles of the reaction system. It measures the energy needed to free an electron or a subatomic particle.

Binding energy is the ionization energy that depicts how much energy will be needed if an electron has to be removed from an atom for a reaction to occur.

It can be said that the energy required to free an electron from the orbit of the atom is measured in electron volt (eV). It is a little different from ionization energy as binding energy can remove any subatomic particle and not just an electron.

Therefore, the binding energy measures the freed subatomic particle.

Learn more about binding energy here:

https://brainly.com/question/16705705

#SPJ2

Answer:

607.9616 grams

Explanation:

Hope this helped!!

Answer:

119.98 mL

Explanation:

Initial volume V1 = 123 ml

Initial temperature = T1 = 21◦C + 273 = 294 K

Initial pressure P1 = 760 Torr - 18.65 Torr = 741.35 Torr

Final volume V2= ???

Final temperature = T2= 21◦C + 273 = 294 K

Final pressure P2 = 760 Torr

From;

P1V1/T1= P2V2/T2

P1V1T2 = P2V2T1

V2 = P1V1T2/P2T1

V2= 741.35 * 123 * 294/760 * 294

V2 = 119.98 mL

Answer:

Amphoteric oxide is an oxide that reacts with both acids and bases. In other words, it possesses both acidic and basic properties. For example both zinc and aluminium are metals but their oxides, ZnO and Al2O3 are amphoteric oxides as they react with both acids and bases.

Explanation:

Answer:

[tex]T_2=339K[/tex]

Explanation:

Hello there!

In this case, according to the Charles' gas law as way to understand the volume-temperature as a directly proportional relationship for this problem, we can write:

[tex]\frac{T_2}{V_2}=\frac{T_1}{V_1}[/tex]

Thus, given the initial temperature and volume and the final volume, we are able to calculate the final temperature as follows:

[tex]T_2=\frac{T_1V_2}{V_1} \\\\T_2=\frac{252K*5.25L}{3.90L}\\\\T_2=339K[/tex]

Best regards!

Answer:

The correct answer is "[tex]1.21\times 10^5 \ Pa[/tex]".

Explanation:

The given values are:

Number of moles,

n = 2.5 moles

Volume,

V = 45 liters

Temperature,

T = 261 K

As we know,

⇒  [tex]PV=nRT[/tex]

or,

⇒  [tex]P=\frac{nRT}{V}[/tex]

On substituting the values, we get

⇒      [tex]=\frac{2.5\times 0.0821\times 261}{45}[/tex]

⇒      [tex]=\frac{53.57}{45}[/tex]

⇒      [tex]=1.19 \ atm[/tex]

On converting it in Pa, we get

⇒      [tex]=1.19\times 1.01325\times 10^5[/tex]

⇒      [tex]=1.21\times 10^5 \ Pa[/tex]

Answer: 16.0 g

Explanation: M(NaOH) = 39.998 g/mol. N = m/M = cV

Mass m = McV = 39.998 g/mol·0.200 mol/l · 2.0 l = 16.0 g

Answer:

Its Body Temperature, Blood glucose, and Blood pH

Explanation:

I checked in Body systems and Homeostasis in Florida.org :>

Answer:

1.44 g

Explanation:

The problem gives you the molarity and volume of the target solution, so right from the start you know that you can use that information to determine the number of moles of hydrochloric acid that it must contain.

So, molarity measures a solution's concentration in terms of how many moles of solute, which in your case is hydrochloric acid, you get per liter of solution.

A

0.158 M

hydrochloric acid solution contains

0.158

moles of hydrochloric acid for very liter of solution. Since you're dealing with

250 mL

, the equivalent of

1

4

th

of a liter, your solution will contain

250

mL

⋅

1

L

10

3

mL

⋅

0.158 moles HCl

1

L

=

0.0395 moles HCl

Now that you know how many moles of hydrochloric acid are needed to prepare your solution, use the compound's molar mass to convert this to grams

0.0395

moles HCl

⋅

36.46 g

1

mole HCl

=

∣

∣

∣

∣

¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

a

a

1.44 g

a

a

∣

∣

−−−−−−−−−−

Explanation:

Please  brainliest.

Answer:

(9.03x10^-14)x(8.455x10^20)=7.634865x10^7

(5.2x10^11)/(2.10x10^-4)=2.476190x10^15

(7.67x10^12)x(3.8x10^15)=29146000000000000000000000000

(9.237x10^20)/(4.5x10^-6)=2.0526x10^26

Explanation:

Answer:

[tex]\boxed {\boxed {\sf 104 \%}}[/tex]

Explanation:

Percent ratio is the ratio of the actual yield to the theoretical yield. The formula is below.

[tex]Percent \ Yield} = \frac{{Actual \ Yield}}{{Theoretical \ Yield}} \times 100 \%[/tex]

The reaction of sodium and chlorine should theoretically yield 12.5 grams, but the actual yield was 13.0 grams.

Substitute these values into the formula.

[tex]Percent \ Yield} = \frac{{13.0 \ g }}{{12.5 \ g}} \times 100 \%[/tex]

Divide.

[tex]Percent \ Yield} = 1.04 \times 100 \%[/tex]

Multiply.

[tex]Percent \ Yield= 104 \%[/tex]

For this reaction, the percent yield is 104%

Answer:

I think the percent composition of carbon in C6H12O6 is: 25% C 40% C 7% C

Explanation:

Answer: The final temperature of the system will be [tex]13.14^0C[/tex]

Explanation:

[tex]heat_{absorbed}=heat_{released}[/tex]

As we know that,  

[tex]Q=m\times c\times \Delta T=m\times c\times (T_{final}-T_{initial})[/tex]

[tex]m_1\times c_1\times (T_{final}-T_1)=-[m_2\times c_2\times (T_{final}-T_2)][/tex]         .................(1)

where,

q = heat absorbed or released

[tex]m_1[/tex] = mass of steam = 25 g

[tex]m_2[/tex] = mass of water = 0.2384 kg = 238.4 g   (1kg=1000g)

[tex]T_{final}[/tex] = final temperature = ?

[tex]T_1[/tex] = temperature of steam = [tex]116^oC[/tex]

[tex]T_2[/tex] = temperature of water = [tex]8^oC[/tex]

[tex]c_1[/tex] = specific heat of steam = [tex]1.996J/g^0C[/tex]

[tex]c_2[/tex] = specific heat of water= [tex]4.184J/g^0C[/tex]

Now put all the given values in equation (1), we get

[tex]25g\times 1.996J/g^0C\times (T_{final}-116)=-[238.4g\times 4.184J/g^0C\times (T_{final}-8)][/tex]

[tex]T_{final}=13.14^0C[/tex]

Therefore, the final temperature of the system will be [tex]13.14^0C[/tex]

Answer:

0.092M

Explanation:

Molarity of glucose solution = number of moles ÷ volume

According to this question, 12.5g of glucose (C6H12O6) is dissolved in enough water to make 750mL of solution.

Molar mass of glucose (C6H12O6) = 12(6) + 1(12) + 16(6)

= 72 + 12 + 96

= 180g/mol

mole = mass/molar mass

mole = 12.5/180

mole = 0.069mol

Volume of solution = 750mL = 750/1000 = 0.750L

Hence, molarity = n/V

Molarity = 0.069 ÷ 0.750

Molarity = 0.092M

Answer:

D

Explanation:

i just got it right on edge

Answer:

It is D.

Explanation:

I also got it correct on edge :)

Answer:

2.114 atm

Explanation:

Since it is just pressure and volume, use Boyle's Law

P1V1 = P2V2

Then plug in numbers

(1 atm)(1 L) = P2(.473 L)

P2 = 2.114 atm

Answer:

hi

Explanation:

John will travel to Russia next week

hope it helps

have a nice day

Answer:

Your answer will be..

John will travel to Russia next week.

Explanation:

He will travel NEXT week so we need to say that he will travel next week.

This may help:

Past tense:  We use -ed because that shows the we already did or finished it. EX: We traveled to Russia over the Spring break

Current Tense:  You will use -ing to show that you are traveling in the current time. EX:We are traveling to Russia.

Future tense:  You might use -ing or keep it the root word. EX: We will be traveling to Russia next week.

We will travel next week.

Hope it helped! Please mark me brainliest! I love helping and I spend a lot of time explaing the answers. Thanks!

~King Sulay~